Reviews Spiral Carbon Steel Pipe

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

  • Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
  • Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
  • Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
  • Comes with five roller, which is suitable for cutting pipes of different sizes..
Check Stock

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check Stock

Carbon Fiber Exhaust Tip 3 Inlet 4 Outlet Red Exhaust Tip 3 inch Car Tailpipe Muffler Tip for 3in Exhaust Pipe

  • 【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3 inch.
  • 【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid....
  • 【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high....
  • 【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
  • 【Warranty】 Tempsnow provide 30-Days warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're....
Check Stock

Gate Caster Wheel Spring Loaded 4 Inch Swivel Castor 440lbs Capacity with Universal Mount Plate,Fence Gate Wheel

  • Left hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

Boston Gear LSA102YR Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.625\ Bore, 12 Pitch, 18 Teeth, Steel

  • Right hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

Boston Gear HLSK103YR Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.750\ Bore, 10 Pitch, 20 Teeth, Steel with Hardened Teeth

  • Right hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion.
  • Bore has keyway and setscrew for use with keyed shaft.
Check Stock

Boston Gear HLSK103YL Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.750\ Bore, 10 Pitch, 20 Teeth, Steel with Hardened Teeth

  • Left hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion.
  • Bore has keyway and setscrew for use with keyed shaft.
Check Stock

Bessey HS-6 6-Inch Wood Handscrew Clamp

  • Adjustable jaws for a strong grip or delicate for those small projects.
  • Oiled wooden jaws won't damage or slip on your work piece.
  • Feature a large diameter spindles for added strength and durability. Spindles and swivel nuts are made from Cold Drawn, carbon steel..
  • Acme thread for Rapid operation and years of hard use..
  • Hardwood handles are over-sized for comfort, Extra torque and reinforced with steel ferrules. The spiral pin used to secure the handles to the spindle is easy to remove for repair or replacement..
  • The jaws, made from quality hard Maple for a lifetime of use, are oiled to resist glue..
  • Feature a large diameter spindles for added strength and durability. Spindles and swivel nuts are made from cold drawn, carbon steel..
  • Acme thread for rapid operation and years of hard use..
  • Hardwood handles are over-sized for comfort, extra torque and reinforced with steel ferrules. The spiral pin used to secure the handles to the spindle is easy to remove for repair or replacement..
  • The jaws, made from quality hard maple for a lifetime of use, are oiled to resist glue..
Check Stock