Reviews Spiral Pipe Mill

Dog and Cat Cord Protector 32.8ft Wire Protector Sleeve Covers for Cord Protects Your Pets from Chewing Through Insulated Cables 5 PCS/Pack 32.8ft in Total 10mm Width by FUNZON

  • ✔【High Quality Raw Material】: 32.8ft in total, specification 6.5ft x 10mm per piece（5 pieces, including 1 black, 1 red, 1 yellow, 1 blue, 1 white）. The spiral cable sleeve adopts high quality pp material, the appearance is shiny, the resilience is good, its wear resistance, aging resistance, oil resistance and corrosion resistance are superior..
  • ✔【Application areas】: Family: computer cable, power cord, mouse cable, wire, water pipe, air conditioning pipe, heating pipe. Office: various network cables, wires, air conditioning pipes, etc. Machinery: used in excavators, loaders, road rollers, pavers, forklifts, cranes, dump trucks and other construction machinery and injection molding machine equipment hose, oil pipe, hydraulic pipe, high pressure pipe, protect the pipe, extend the service life of the pipe..
  • ✔【Protects Your Pets from Chewing】: This cable pet protector can effectively protects your pets or other critters from chewing the cable. Acts as a second barrier of defense against your pet chewing through the cable..
  • ✔【Spiral Design】: The wire protector adopts spiral design ,manual installation is convenient and easy. It can also used as wire organizer, you can put several wires together in the sleeve. There’s no more tan....
Check Stock

EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long (4 inch), 1/2” Cutting Diameter, 2” Cutting Length, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving

  • Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
  • The router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

OSCARBIDE 1/8\Shank Ball Nose Carbide End Mills CNC Spiral Router Bits 2 Flutes Milling Cutter for Engraving Milling 3D sculpturing Roughing Acrylic Wood PVC Aluminum 10pcs

  • Ball Noze type,1/8" Shank X 1/8"Cutting Dia, 17mm Flute Length with 2 Spiral Flutes, Total length 38 mm.
  • Carbide Ball End mill Router bits are widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes.
  • Due to the Great hardness of solid Tungsten carbide Material, it can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB.
  • Double Flute Spiral Design Improved the chip removal efficiency, surface mirror finish prevent chips from sticking to bits, which makes cutting more smooth.
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines

  • UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • The router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

Yakamoz 10-Pack 1/8" Shank Upcut Spiral Router Bits 3-Flute 7/8" Cutting Length CNC Router Flat End Mill Bits for MDF Acrylic Wood PVC 7/8" Cutting Length

  • Type: Spiral (Upcut), Cutting Type: 3 Flutes with Flat End, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 7/8" (22mm), Overall Length: 1-33/64" (38.5mm).
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The unique flute design makes cutting process easier and faster, smooth cutting without 2nd polishing process..
  • Great for carving, cutting, engraving, milling in materials like density board, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..
  • Built with tungsten steel, the CNC router mill has the superiority of high hardness, high-temperature resistance, and wear resistance..
Check Stock

2" x 100' 10 Mil Pipe Wrap Tape

  • Corrosion protection for metal piping systems above and below ground..
  • Corrosion protection for fittings and joints on mill coated pipe..
  • Corrosion protection of electrical conduit & fittings..
  • Resists corrosive action by salt water, soil acids, alkalies and salts..
  • Prevents dielectric corrosion between buried steel pipe and soil minerals..
Check Stock

LGXEnzhuo Pipe Cutter Pipeline Hydraulic Pipe Cutting Machine Fire Steel Pipe Cutting Machine Can Cut Pipe Diameter 40-280mm 220V 750W

  • 【WIDE APPLICATION】Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • 【PARAMETER】Diameter of steel pipe that can be cut:40-280mm.
  • The wall thickness of the steel pipe that can be cut:3-6mm.
  • 【HIGH EFFICIENCY】Copper motor, power 750W, with high efficiency, stable performance and long service life..
  • 【HIGH STRENGTH BLADE】High strength blade is made of high quality steel to ensure good cutting effect..
  • 【DURABLE】Thicker roller, more wear-resistant.Strong, sturdy frame, suitable for heavy duty operation..
Check Stock

SpeTool 5PCS 12401 4 Flutes Carbide CNC End Mill, Square Nose 1/4 inch Shank, 2-1/2 inch Long Overall, Titian Coated for Metal Mill

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill With Flat Top, 4-Flute, For Finishing, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Drill America 1-1/4\ High Speed Steel Straight Flute Taper Pipe Reamer, DWR Series

  • Self-feeding spiral design for extra-fast and easy hand reaming.
  • Suitable for hand reaming on pipe, sheet metal or for enlarging conduit box outlets.
  • The model 2-S reamer is not suitable for power reaming.
  • Pipe reamer has a 1/4-inch to 2-inch (6 mm to 50 mm) pipe capacity.
Check Stock

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

  • Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
  • Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
  • Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
  • Comes with five roller, which is suitable for cutting pipes of different sizes..
Check Stock