Reviews Servo Spindle Motor

Barnabas Robotics Servo Motor Tester Kit | 180 Degree 9g Servo Motor + RC Servo Tester Controller + 6V Battery Holder

  • [CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
  • [9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
  • [4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
  • [SERVO TESTER] Includes 3 modes to test servo motors or ESC.
  • [GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.
Check Stock

Miuzei 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Car Boat Control with Cable, Mini Small Servos for Arduino Project

  • Application Fields: Miuzei SG90 9G Servo Motor Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys and Arduino Experiments.
  • Interface Type: This SG90 Servo Compatible With JR & Futaba Interface. Miuzei Micro Servo 9g no Load Running Speed: 0.09±0.01 sec/60° at 4.8V.
  • Miuzei Micro Servo Motor Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW Signal, Then it Will Be Work Normally.
  • How to Reach 180 degree -- Miuzei SG90 9g Servo Motor Need to Meet 4.8V Power Supply Voltage and 2500usec Pulse Signal, the Angle of Rotation.
Check Stock

FEETECH 35KG Servo Motor 360 Degree High Torque Digital Servo High Voltage Waterproof Metal Gear Aluminium Case for RC Helicopter Airplane Car Boat Robot Controls - FT6335M

  • HIGH QUALITY SERVO: FT6335M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 360 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock

Happybuy CNC Coil Winder 6000 Circles/Min Automatic Coil Winder 400W 110V Micro Winding Machine Computer Controlled For 0.03-1.2mm Wire Large Torque Winding Machine

  • Product Parameters: Cop motor: Three phase machine 400W(1/2hp).
  • Product Parameters: Spindle motor: Brushless DC.
  • Work Efficiently: The roll spool adopts step-servo motor, be driven by the constant current circuit, completes the winding process with high speed and high precision.
  • Easy to Operate: This winding machine adopts CNC Micro-computer controller, make it easier to set the parameters.
  • Multifunction: This automatic coil winding machine adopts the latest synchronous winding a single -chip microprocessor design, more powerful, much smaller, stronger anti-interference ability. Super elevated wisdom model, it has self-inspecting functions, including the errors of the equipment, excessive speed tracking and the calibration of the speed.
Check Stock

4Pcs MG996R Servo Metal Gear Torque Digital Servo Motor for Smart Car Robot Boat RC Helicopter

  • MG996R Micro Servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor. The speed, tension and accuracy all increase..
  • Compatible with most standard receiver connector: Futaba, Hitec, Sanwa, JR..
  • Torsional moment: 12kg/cm(6V), 13kg.cm.at(7.2V).
  • Stable and shock proof, metal gear, connector wire length 300mm..
  • Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft for DIY..
Check Stock

ACEIRMC SG90 Servo Motor Micro Servo 9G Servo Motor for RC Robot Arm Helicopter Airplane Remote Control (5 Pcs) (5pcs)

  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on compatible for Arduino ,Raspberry Pi.
  • The SG90 mini servo motor is lightweight, high-quality and lightning-fast.The servo is designed to work with almost all the radio control systems..
  • SG90 Micro Servo Motor compatible for Mini Arduino Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable.
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Check Stock

2PCS 8mm to 8mm Aluminium Plum Flexible Shaft Coupling 30mm Length 25mm Diameter Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor

  • Material：Made of aluminum material with corrosion resistance and long life..
  • Size:L30mm x D25mm/1.18inch x 0.98inch( L*D) Diameter: 8mm to 8mm / 0.31inch to 0.31inch.
  • Product features: shaft coupling has high torque, high rigidity, good vibration resistance, flexible response and durability in removes stress between the motor and driving components..
  • Widely Used：The shaft couplers are widely used for servo motors, spindle, step motor etc..
  • Package Include:2pcs 8mm to 8mm D25 L30 Connector Flexible Coupler,1pcs M4 hex wrench..
Check Stock

2PCS 5mm to 8mm Aluminium Plum Flexible Shaft Coupling 25mm Length 20mm Diameter Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor

  • Material：Made of aluminum material with corrosion resistance and long life..
  • Size:L25mm x D20mm/0.98inch x 0.79inch( L*D) Diameter: 5mm to 8mm / 0.197inch to 0.31inch.
  • Product features: shaft coupling has high torque, high rigidity, good vibration resistance, flexible response and durability in removes stress between the motor and driving components..
  • Widely Used：The shaft couplers are widely used for servo motors, spindle, step motor etc..
  • Package Include:2pcs 5mm to 6mm D20 L25 Connector Flexible Coupler,1pcs M4 hex wrench..
Check Stock

2PCS 5mm to 8mm Aluminium Plum Flexible Shaft Coupling 30mm Length 25mm Diameter Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor

  • Material：Made of aluminum material with corrosion resistance and long life..
  • Size:L30mm x D25mm/1.18inch x 0.98inch( L*D) Diameter: 5mm to 8mm / 0.19inch to 0.31inch.
  • Product features: shaft coupling has high torque, high rigidity, good vibration resistance, flexible response and durability in removes stress between the motor and driving components..
  • Widely Used：The shaft couplers are widely used for servo motors, spindle, step motor etc..
  • Package Include:2pcs 5mm to 8mm D25 L30 Connector Flexible Coupler,1pcs M4 hex wrench..
Check Stock

FEETECH 35KG Servo Motor 7.4V High Voltage Waterproof High Torque RC Servo Full Metal Gear Digital Servo, Aluminium Case, Control Angle 180° for 1/8 1/10 RC Cars, TRAXXS x4, Baja, RC4WD, GTR and More

  • HIGH QUALITY SERVO: FT5330M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 180 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock