Reviews Servo Motor Steel Gear Sets

diymore 6Sets MG996R 55g Digital Metal Gear Servo Motor + MG995 MG996R Metal Servo Arm 25T Disc Metal Horns for Robot Arm RC Helicopter Airplane Car Boat Robot

  • 【Package】Package included 6 sets MG996R metal gear servo motor+25T Disc metal horns..
  • 【Updated version】MG996R Micro Servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor. The speed of MG996r is faster, the accuracy is much improved and the tension is increased..
  • 【Quality】180°rotation high torque,Stable and shock proof and also of high speed.Can compatible with most standard receiver connector: Futaba, Hitec, Sanwa, GWS, etc..
  • 【Parameter】Torsional moment: 12kg/cm(6V), 13kg.cm.at(7.2V).
  • Operating Speed : 0.17sec / 60 degrees (4.8V no load).
  • Operating Speed : 0.13sec / 60 degrees (6.0V no load)..
  • 【Application】Biped robot/manipulator/remote control car, suitable for 50-90 grade methanol fixed-wing~aircraft and 26cc-50cc gasoline fixed-wing aircraft and other models..
Check Stock

AGFRC 36KG IP67 Waterproof Steering Servo High Torque Programmable Full Metal Gear Digital Brushless Servo with 25T Metal Servo Horn for 1/10 RC Models, Control Angle 180° (A80BHSW V2)

  • Programmable & High Torque - AGFRC A80BHSW high torque servo is programmable by the AGF-SPV2/3 servo programmer to change the torque, speed, angle, inversion, etc. The maximum torque of this steering servo for RC car is up to 36 kg/cm (500 oz/in) @8.4V and speed up to 0.071sec/60°@8.4V..
  • IP67 Waterproof Design - AGFRC RC steering servo motor uses high-precision production technology to improve product tightness. With IP67 waterproof design, when you cross the mountains and pass the charming stream, fully magnetic waterproof IP67 grade can let your model play with the river..
  • High Quality & Performance - Standard waterproof high torque servo equipped with full patent reinforced steel gear, full metal case, three ball bearings, and magnetic angular position Sensor which is low power consumption and can instantaneous angle sensing..
  • High Precision & Application - Advanced linearity and accuracy, stable, low noise, waterproof, dust-proof. This brushless full metal gear servo is with a standard size, dimension: 40*20*37.5mm, ideal for 1/10 buggy, monster truck, RC car, crawler, climbing car, boat, airplane, helicopter, robot, etc..
  • Satisfied Customer Service - Please read the detail description of this brushless high speed HV servo motor first, if any ideas ....
Check Stock

Micro Machines Playtronic MAX

  • Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
  • Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
  • This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
  • The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
  • The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..
Check Stock

Adeept AD002 4 Pcs Compatible with MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project

  • 【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
  • 【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
  • Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
  • 【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
  • 【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..
Check Stock

Adeept AD002 2 Pcs Compatible with MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project

  • 【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
  • 【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
  • Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
  • 【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
  • 【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..
Check Stock

4Pcs MG996R Servo Metal Gear Torque Digital Servo Motor for Smart Car Robot Boat RC Helicopter

  • MG996R Micro Servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor. The speed, tension and accuracy all increase..
  • Compatible with most standard receiver connector: Futaba, Hitec, Sanwa, JR..
  • Torsional moment: 12kg/cm(6V), 13kg.cm.at(7.2V).
  • Stable and shock proof, metal gear, connector wire length 300mm..
  • Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft for DIY..
Check Stock

AGFRC 55KG Digital-Steering-Servo High-Torque Programmable - Full Metal Gear Brushless Servo for 1/8 1/10 RC Models, Control Angle 180° (A86BHM)

  • 【UPGRADED & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/V3 servo programmer (not Include) to change the torque, speed, angle, etc..
  • 【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Size: 40*20*41.5mm(1.57*0.79*1.63in).
  • 【HIGH QUALITY & PERFORMANCE】Standard 55KG high torque servo equipped with patent reinforced steel gear with PINS, three ball bearing, full Aluminium housing with groove surface for fast heat dissipation, accuracy with precision potentiometer..
  • 【APPLICATION & 180 DEGREE ROTATION】AGFRC RC steering digital servo motor uses high-precision production technology to reduce production deviation and improve product tightness, ideal for 1/8 1/10 Buggy /Monster Trucks/RC car/boat/plane/helicopter/robot..
  • 【SATISFIED CUSTOMER SERVICE】Please read the detail description of this RC car brushless servo motor first, if any ideas about our high torque digital servo, contact us first & We will provide you a better solution, and make you satisfied..
Check Stock

AEDIKO MG996R Servo Motor Control 180 Angle Metal Gear Servo Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter 2-Pack (MG996)

  • Positioning Speed Without Load: 0.17s / 60 degrees 4.8V.
  • Compliant with Futaba, Hitec, Sanwa, GWS, etc ..
  • Latest Version: MG996R Servo Motor Which Updated from SG90 and MG90S Micro Servo Motor,Made of High Precision Potentiometer and High Resolution Digital Chip to Ensure Stable Performance and Solve Problems:Unsuitable R / C and Slow Response Time.
  • Gear Type: All Metal Gear RC Servo Can Control the Angle Range from 0 to 180, with Precise Control and Gears are Consistent,Which Can Rotate 360 Degrees When Power Off.
  • Application: Analog Servo Motor Great for RC Helicopters, Micro Robots,Robotic Arms and RC Rock Crawler, RC Boat Motor,Truck, Boat, Racing Car,Various Remote Control Toys and Arduino Experiments.
Check Stock

2.4KG Micro Digital Servo Kit - High Torque 9g Metal Servo Waterproof Mini Steering Gear Standard Fast Speed Continuous Rotation for SCX24 RC Model & EMAX ES08MD II Standard 180 Degree

  • 2 Pack servo set : The EMAX ES08MD II digital servo's torque: 1.6kg/cm(4.8V ), 2.0kg/cm(6V), positioning speed(at no load): 0.12s / 60 degrees(4.8V), 0.1s/60 degrees(6.0V), maximum rotating angle: 180°.It can instantly generate high torque to make your RC car overtake in curve.
  • Wide application: Equipped with JR & Futaba universal plug, the 3 wire metal servo can be well adapted to Axial SCX24 SCX10 RC cars helicopters KT, fluttering, gliding, small robots, arduino experiments and other models.
  • Strong full metal gear: Waterproof servo motor is made of sturdy PVB plastic shell, strong steel metal gear and hard iron shaft.This powerful steering gear has passed the CE international safety test，which can withstand more than 1,000 impacts and increase your model's service life.
  • Stable performance: Compared with other steering gears, our upgraded high torque servo are equipped with high precision potentiometers and high-resolution digital chip, which can make your RC car respond quickly, enhance anti-interference ability, and quickly dissipate heat.
Check Stock

AGFRC 100KG High-Torque 1/5-Scale RC-Servo-Motor - 12V Waterproof Metal Gear Brushless Servo for 1/5 RC Models, Control Angle 180° (A280BVSW(3S/4S))

  • 3S / 4S LiPo Direct Connection - 1/5 scale high torque servo is with 3S / 4S LiPo high voltage application, available to connect with 3S / 4S LiPo battery directly without BEC. Ideal for 1/5 scale buggy, monster trucks, RC car, crawler, boat, plane, helicopter, on road, off road, etc..
  • IP67 Waterproof Design - Stable, low noise, dust-proof, advanced linearity and accuracy. With IP67 waterproof design, which makes servo still work normally when immersed up to 1 Meter depth of 30 minutes. Size: 65.8*30.0*59.0mm (2.59 x 1.18 x 2.32 in).
  • High Precision & Monster Torque - AGFRC 1/5 scale giant steering digital servo motor uses high-precision production technology to improve product tightness. The maximum torque of this HV servo is up to 125kg - cm (1738 oz-in) @ 16.0V and speed up to 0.080sec / 60° @ 16.0V..
  • High Quality & Performance - Waterproof 100KG high torque metal gear servo equipped with patent reinforced steel gear with pins, five ball bearings, full CNC Aluminium housing with groove surface for fast heat dissipation, accuracy with precision magnet angle sensor..
  • Satisfied Customer Service - Please read the detail description of this waterproof brushless servo first, if any ideas about our servo, contact us first & we will provide you a better solut....
Check Stock