Reviews Servo Motor Voltage Regulator
[2-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot
- The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
- This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
- Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
- Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
- Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check StockFEETECH 35KG Servo Motor 360 Degree High Torque Digital Servo High Voltage Waterproof Metal Gear Aluminium Case for RC Helicopter Airplane Car Boat Robot Controls - FT6335M
- HIGH QUALITY SERVO: FT6335M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
- GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
- SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
- HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 360 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
- STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stocksb components Motor Driver Board for The BBC Micro bit 2 Channel DC Motors and 3 Channel Servos Motors Motor Driver for Micro bit BBC microbit Motor Driver Board
- micro:bit edge connector, directly pluggable.
- 2x DC motor interfaces, 3x servo interfaces.
- Integrates 5V regulator, up to 3A output current.
- Onboard multi connector options for DC motors in different specifications, onboard standard servo headers.
Check StockETMall 6PCS MG996R Servo Motor Metal Gear Servo Motor Torque Digital Servo Motor High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter Compatible Arduino Raspberry Pi Project
- WHY CHOOSE IT: This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy allincrease).This high-speed standard servo motor can rotate 180 degrees (90 in each direction)..
- WIDE APPLICATIONS: The MG996R Servo model Good performance digital standard servo, compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc. Which can be a common use for robots, mechanical arms, climbing cars and remote control toys..
- ELECTRICAL SPECIFICATION: The MG996R Servo Torque at 4.8V 13.5kg/cm, 6V 15.2kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees.
- 6.0V without load 0.15s / 60 degrees. Recommended voltage: 5V, current use: 3A..
- STABLEPERFORMANCE:Stable and shock-proof iron core motor, metal gears, power supply through external adapter..
- Tips: If you’re not completely satisfied for any reason, simply return it or contact us.Your 100% satisfaction is our goal..
Check Stock4 Pack MG996R Metal Gear Torque Digital Servo with Arm Horn, MELIFE MG996 Robot Servo Motor for FUTABA Hitec Sanwa GWS JR RC Helicopter Car Boat Robot
- This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase)..
- The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
- Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor, Metal Gear..
- Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees..
- Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check StockFEETECH 35KG Servo Motor 7.4V High Voltage Waterproof High Torque RC Servo Full Metal Gear Digital Servo, Aluminium Case, Control Angle 180° for 1/8 1/10 RC Cars, TRAXXS x4, Baja, RC4WD, GTR and More
- HIGH QUALITY SERVO: FT5330M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
- GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
- SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
- HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 180 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
- STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check StockMakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano
- Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
- Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
- 2.You should connect higher power supply for higher-power servo.
- 3.Make sure servo are connected properly, otherwise they will not move..
- Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
- Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
- Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
- Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..
Check Stock9imod 45KG High Torque Servo,Waterproof Servo Motors,Metal Gear Coreless Servo,8.4V HV Digital Servo,Full Aluminum Case for RC Servo 1/10 1/8 Crawler Car
- 1.Waterproof Servo: IP67 high waterproof grade allows you to play your RC model in drippy environments..
- 2.High Torque and Voltage Servo:6.0V -8.4V high oprate voltage.This 45kg waterpoof steering servo's maximum torque is up to 45 kg/[email protected],controllable angle range from 0 to 180 degrees..
- 3.Full Metal Gear Coreless Servo:Equipped with stainless steel gears,full CNC aluminium shell,less noise,light weight.Dual ball bearings.Excellent linearity,high speed servo precision control..
- 4.Widely Use Servo Motor:Compatible with 1/5,1/6,1/8,1/10,1/12 Scale Clawer Truck,TRX6,scx10,RC Car/Robot/Boat/Mechanical Arm/Quadcopter and other remote control models..
- 5.Standard Dimension RC Servo: 1.57 x 0.78 x 1.91 inch(40 x 20 x 48.6 mm).
- Weight:2.65oz (75g).with 25T Metal Servo Horn..
Check StockDilwe RC Car Servo,Durable Plastic Gear Servo for WLtoys 12428 / 12427 1/12 RC Car Upgrade Spare Parts
- ✔20KG Large Torque - 20KG Servo Motor 20.5 kg.cm(4.8V) - 22.8 kg.cm(298.5 oz/in)(7.2V)..
- ✔270 Degree Rotation - Pulse width signal of 20kg servo motor from 500 to 2500 μsec, well controlled from 0 to 270 degrees. When the input signal is 500usec, the angle is 0 degrees, and at 2500 μsec, the angle is 270 degrees..
- ✔High Precision - DS3218 20kg digital servo accuracy with precision potentiometers. Excellent linearity, precision control, high quality leads and center nicely..
- ✔High Rotation Support Waterproof - Waterproof performance: IP66. Metal servo motor accuracy and linearity have been greatly improved! Perfect satisfy the needs of making robots. Also for cars, boats, vehicles and remote control toys and so on..
- ✔Dimensions - 40*20*40.5mm(1.58*0.79*1.60in).
- Weight - 56g±5%(2oz±5%). Operating voltage range: 4.8-7.2V.
Check StockHosyond 10 Pack Servo Motors SG90 9G Micro Servo for RC Robot Helicopter Airplane Boat Remote Control Toys, Servo for Arduino Project, Blue
- [Applications] SG90 9G servo motor, compatible with RC helicopters, micro robots, robot arm and ships etc. Support various remote control toys and Arduino project.
- [Interface type] This SG90 servo is compatible with JR & Futaba interface.
- [Operating speed] 0.12 second/ 60degree ( 4.8V no load), 0.1 second / 60degree ( 6.0V no load), Max rotation angle:180 degrees.
- [Reminder] The starting current of the analog servo motor must be greater than 1A. SG90 Servo is an analog servo and needs to continuously provide PMW signal to work normally.
Check Stock