Reviews Servo Board For Drones

MMOBIEL Micro Servo Motor Kit MG995 55g 360° for RC Drone / Car / Airplane / Helicopter / Vehicles / Robots / Compatible with Arduino Projects and Raspberry Pi Incl. Screws and 4 Servo Arms

  • ...tering deviation:≤ 1° Degree, Maximal Angle 120° Degree Neutral position: 1500 μsec, Dead band width:7 μsec (microsecond), Rotating direction: Counter Clockwise (900→2100μsec), Pulse width range: 900→2100 μsec, Operating Temperature Range: 0℃～55℃elcius.
  • Compatibility: Compatible with Remote Control Drones, Helicopters, Cars, Boats, and all sorts of RC Toys and hobby projects. Can also be used with any type of Arduino project, Raspberry Pi, Futaba, JR, Sanwa and Hitec remote system..
  • Set Contains: 1x MG995 Micro Servo Motor 55G, 1x 3 Colored Cable (Brown / Yellow / Red) with a Futaba Connector Plug, 4x Servo Horn Steering Arms (Star, Arm, X, Wheel), 4x Stainless Steel Screws..
  • High quality product by MMOBIEL: Each part is tested before shipment. Item in Stock..
Check Stock

9 Pieces JST Y Connector 3 Pin JST Plug Splitters Servo Extension JST Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car or Airplanes (Mixed Style)

  • Package includes: you will 9 pieces of servo extension cord, 3 pieces of male JST to female JR (Futaba) cable, 3 pieces of male to 2 female Y harness, 3 pieces of male to 3 female Y harness.
  • Abundant quantity and diverse styles that can meet your various needs.
  • Appropriate sizes: the servo extension cord measures approx. 15 cm/ 5.9 inches in length, universal size for your use, the color is white, black and red.
  • Extensive usages: these JST male to female are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
  • Well made: JST connector is made of quality PVC material, with good insulation and flame retardant.
  • The interior is made of tinned copper, which has a good transmission and low resistance.
  • Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control unit, which is male to female.
Check Stock

10 pcs 3.93inch JR Style Servo Extension Cable Lead Wire - 3-Pin JR Plug Male to Male RC Servo Wire Extension Cord

  • 3-Pin JR plug male to male connector servo extension lead wire cable..
  • There is a 3 pin JST RE connector on each end. This is a simple 3 wire cable. Ideal for jumping from board to board, or something else..
  • Practical range: For Airplane, Helicopter, Quad co-pterter , Multi-coater RC car servo connection or receiver connection..
  • Packaging quantity ：10 Pcs * 10cm JR 3pin male to male plug servo extension cables wires cords leads..
Check Stock

15 Pcs Servo Extension Cable JST Y Connector 3 Pin JST Plug Splitters Male to Female Servo Adapter JST Extension Servo Wire Connector Compatible with RC JR Futaba RC Car or Airplanes, 3 Styles

  • You Will Get: the package comes with 15 pieces of servo extension cables, including 5 pieces of male JST to female JR (Futaba) cable, 5 pieces of male to 2 female Y harness, 5 pieces of male to 3 female Y harness, sufficient quantities and multiple styles can satisfy your different using needs.
  • Proper Size: the servo connector is about 15 cm/ 5.9 inches in length, suitable size for your to use, with colors of white, black and red.
  • Wide Application: these JST plug splitters are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also suitable for remote control car, RC car and so on, providing a lot of usages for you.
  • Nice Craftmanship: the JST plug connector is made of quality PVC material, which has good insulation and flame retardant, and the interior is made of tinned copper, featured a good transmission and low resistance performance, you can rest assured to use it.
  • Practical Function: the servo wire connector can be applied for jumping from board to board, or nice to control panel cable remote control part that is male to female.
Check Stock

BotBrain Robotics Control Board

  • Basic Stamp microprocessor, the board uses sensor inputs, a program, and servo outputs to operate a robot using the Parallax pBasic language.
  • Features include 8 sensor inputs and 5 servo outputs, all with polarized connectors as well as a built-in piezo "speaker".
  • Holes on side on the side of the board bolt to Merkur parts.
Check Stock

MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano

  • Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
  • Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
  • 2.You should connect higher power supply for higher-power servo.
  • 3.Make sure servo are connected properly, otherwise they will not move..
  • Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
  • Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
  • Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..
Check Stock

DIYmall 10pcs 10cm 3.93inch Male to Male JR Plug Servo Extension Lead Wire Cable 3Pin 100mm for RC Plane

  • 10CM Male to Male JR Plug Servo Extension Lead Wire Cable.
  • Great for jumping from board to board or just about anything else..
  • There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers..
  • Length:100mm Type:JR Plug Servo Extension wire (Male to Male).
Check Stock

Drone Simulator

  • Dcl the game is modelled closely on real-life drone flight behaviour - so close that the top performing pilots in the game can compete in the dcl Draft selection, where pilots will be drafted to real-life racing teams competing in the dcl.
  • four distinct flight modes: Arcade Mode is perfect for beginners, thanks to the automated altitude control and simplified controls. Gps mode flies like your standard camera drone, with stabilisation and altitude control. Angle mode, also known as stabilised mode on some models is available on most amateur racing drones. Acro mode gives the Pilot more control, this is how real drone racing and freestyle pilots control their drones.
  • game modes: free flight, time attack and online multiplayer (up to 30 people).
  • choose from 27 different tracks ranging from torino (Italy), Sim at AI (China), laax (Switzerland), to many other real racing locations and several fantasy tracks. Many more to come..
  • physical presets: choose from three unique physical presets for your drone: Lightweight, dc19-standard, and heavyweight for a very different flight behaviour. Highly realistic flight physics in these three set ups keeps competition balanced.leader board: global leader board for each platform.
Check Stock

6Pcs ShareGoo JR Style Servo Splitter Cable, 2.75' Servo 1 Male to 2 Female JR Y Harness Y Cable Extension Wire for RC Models Car Airplane Helicopter Drone Boat

  • Used for RC cars trucks airplanes helicopters rc boat servo connection, receiver connection and flight control board..
  • This servo Y-cable allows you to control two servos with one radio channel..
  • Material: 22AWG silicone wire.Wire Length: 7CM/2.75".
  • 3Pin wire cable.Male JR plug to 2 Female JR plug Y Harness cable..
  • Pack of 6 JR style servo splitter cable,unique design, professional quality JR style connectors..
Check Stock

The Complete Guide to Drones Extended 2nd Edition

  • Dcl the game is modelled closely on real-life drone flight behaviour - so close that the top performing pilots in the game can compete in the dcl Draft selection, where pilots will be drafted to real-life racing teams competing in the dcl.
  • four distinct flight modes: Arcade Mode is perfect for beginners, thanks to the automated altitude control and simplified controls. Gps mode flies like your standard camera drone, with stabilisation and altitude control. Angle mode, also known as stabilised mode on some models is available on most amateur racing drones. Acro mode gives the Pilot more control, this is how real drone racing and freestyle pilots control their drones.
  • game modes: free flight, time attack and online multiplayer (up to 30 people).
  • choose from 27 different tracks ranging from torino (Italy), Sim at AI (China), laax (Switzerland), to many other real racing locations and several fantasy tracks. Many more to come..
  • physical presets: choose from three unique physical presets for your drone: Lightweight, dc19-standard, and heavyweight for a very different flight behaviour. Highly realistic flight physics in these three set ups keeps competition balanced.leader board: global leader board for each platform.
Check Stock