Reviews Pci To Ide - BestBuyersPro.com

SATA Card 8 Port, PCIE to SATA 3.0 Controller Expansion Board with Low Profile Bracket, SATA3.0 Interface Expansion Card for Windows 7/8/XP/10

【PCI-E to SATA 3.0 expansion card】Use with SATA3.0 data cable for best results. with 8 x SATA3.0 interfaces expansion interface..
【SATA Controller】Compatible with SATA6G, 3G and 1.5G hard drives. Fit for Windows 7/8 / XP / 10 Fit for Ubuntu support system, PCI-E 1X 2X 4X 8X 16X interface..
【Serial ATA 3.0】Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0.
PCI-Express v2.0 compatible, backward compatible with PCI-Express v1.0..
【AHCI1.0 Mode and IDE Mode】Supports AHCI1.0 mode and IDE mode, native command queue (NCQ), FIS based on port multiplier switch or command switching, and hot plug..
【6.0 Gbit/s / 3.0 Gbit/s / 1.5 Gbit/s Transmission】Supports communication speeds of 6.0 Gbit/s, 3.0 Gbit/s and 1.5 Gbit/s.
supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i..

8-in-1 ATX power supply tester: Support testing 20-pin IDE/24-pin IDE/HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector..
Aluminum alloy shell: light and easy to carry, high strength, good thermal conductivity and corrosion resistance..
1.8″ LCD screen: The output voltage is displayed on the 1.8″ LCD screen, which is easy to read (1.8″ LCD screen is powered by the 20-pin/24-pin connector). Note: Is there a scratch on the product screen? Because the screen is easy to scratch, we put a protective film on it, if you think it is not beautiful, you can tear it off by yourself..
Buzzer alarm: When your power supply PG number fails, the power tester will emit a buzzer alarm, which is easy to know..
When testing with HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector, the indicator on the left shows the output voltage (+12V + 3.3V + 5V)..

CPU: Dual 771-pin LGA Sockets Supports Intel 64-bit Dual-Core Xeon Processor 5000X sequence upto 3.73GHz.
Chipset: Intel 5000X (GreenCreek) chipset & MCH + PXH-V + ESB2.
Memory: 8x 240pin DDR2-667/533 DIMMs, Dual Branch Memory Bus, ECC/FB-DIMM, Upto 32GB.

Micro ATX Architecture: The Motherboards size is 220 x 170mm M ATX Architecture, All solid State panels, good materials are preferred for long‑term durability..
Multi Phase Power Supply: The power supply has 24 pin and 4 pin interface, which is stable,accurate and evenly distributed, and the heat load of various power supply chipsets improves the performance of the CPU..
Various Expansion Interfaces: This computer motherboards support VGA , PCI and COM interface, DDR2 RAM, SATA/ IDE Interface..
Solid State Capacitors: Solid‑state capacitors have stable performance and greatly extend the life of the motherboard..
Built In PCI: This micro atx gaming motherboard has PCI‑E 16 slot, PCI slot is an expansion slot based on PCI local bus..

This adapter using JM20330 Serial ATA Bridge Chip..
50mm (1.8 inches) MSATA Mini PCI-E SATA SSD to 2.5 inches Notebook IDE Adapter with case. .
Used with MSATA(Mini PCI-E SATA) SSD ONLY!.

Micro ATX Architecture: The Motherboards size is 220 x 170mm M ATX Architecture, All solid State panels, good materials are preferred for long‑term durability..
Multi Phase Power Supply: The power supply has 24 pin and 4 pin interface, which is stable,accurate and evenly distributed, and the heat load of various power supply chipsets improves the performance of the CPU..
Various Expansion Interfaces: This computer motherboards support VGA , PCI and COM interface, DDR2 RAM, SATA/ IDE Interface..
Solid State Capacitors: Solid‑state capacitors have stable performance and greatly extend the life of the motherboard..
Built In PCI: This micro atx gaming motherboard has PCI‑E 16 slot, PCI slot is an expansion slot based on PCI local bus..

This PCI-e to SATA card is suitable for any chassis, whether it is ATX, M-ATX or ITX chassis..
The interface adopts 2XSATA interface, PCI-e slot can be used regardless of PCI-E (1X 4X 8X 16X), and full-speed 6GBPS bandwidth transmission..
Plug and play, support hot swap, PCI-E card supports IDE/AHCI programming interface, main control chip is suitable for ASM1061..
The package contains expansion card X1, bezel X1, CD X1, and the system is compatible with windows(R) XP/server2003/VISTA/7/8(32/64bit)/mac/linux..
After you purchase this product, if you have any questions about the product, please feel free to contact us. We will patiently answer it. When the product has quality problems, we will also properly handle it for you..

Support hot swap, plug and play, easy to use..
Comply with Serial ATA 3.0 specification, backward compatible with SATA2.0, SATA1.0, conform to PCI-Express v2.0 specification, and backward compatible with PCI-Express v1.0..
【2 Port SATA 3.0】support AHCI 1.0 mode and IDE mode, bus interface: PCI-Express x1 slot, expansion interface: 2 SATA 3.0 interfaces.
【Support system】: Win10 / Win8 / Win7 / WinXP /Vista/Linux.System requirements: There is an available PCI Express X1 slot, while supporting PCI-E X2 X4 X8 X16.
Support 6.0 Gbps, 3.0 Gbps and 1.5 Gbps of communication speed.

Micro ATX Architecture: The Motherboards size is 220 x 170mm M ATX Architecture, All solid State panels, good materials are preferred for long‑term durability..
Multi Phase Power Supply: The power supply has 24 pin and 4 pin interface, which is stable,accurate and evenly distributed, and the heat load of various power supply chipsets improves the performance of the CPU..
Various Expansion Interfaces: This computer motherboards support VGA , PCI and COM interface, DDR2 RAM, SATA/ IDE Interface..
Solid State Capacitors: Solid‑state capacitors have stable performance and greatly extend the life of the motherboard..
Built In PCI: This micro atx gaming motherboard has PCI‑E 16 slot, PCI slot is an expansion slot based on PCI local bus..