Reviews Sd To Ide Mini

GODSHARK SD Card to 2.5 Inch IDE Adapter, SDHC SDXC MMC Memory Card Converter to Laptop HDD 44 Pin Male PATA Port

  • Adapt SD/MMC flash memory card to a super compact, cost efficient, anti-shock, low power consumption, no acoustic noise and fast access time HDD.
  • Enables SD/MMC card as a normal IDE 2.5" hard disk.
  • Provides an alternative for data storage and transfer or test for motherboard, sound/audio/memory card, etc..
  • Ideal for some devices that required a fast and easy bootable device such as POS. Be a SD/MMC card reader/writer.Compatible with SD, SDHC, SDXC & MMC specification.One 2.5" IDE hard disk driver 44pin male connector and one standard SD socket..
  • Supports PIO, Multi-Word DMA and Ultra DMA data transfer mode.Supports boot function.No external power required and powered from IDE interface.Easy installation and no driver required.Mini board design and no space wasted.Dimensions: 36mm x 52mm.Attention: This adapter does not support hot-swap of CF cards, so please turn off power when changing cards..
Check Stock

WSDMAVIS 1 Pcs SD Card to IDE Adapter 2.5 Inch 44Pin Male Adapter SD SDHC SDXC MMC Memory Card Converter to Laptop HDD

  • Use this product to convert SD card into 2.5inch 44pin IDE interface.There are two main control chips on this board, and there is an SD card socket on the back..
  • Compliance with SD specification Ver2.0, IDE/ATA-33 specification.Standard IDE interface interface: true-IDE mode, and supports DMA-33 transfer mode.
  • The IDE interface is a 44-pin/2.0mm male connector..
  • The SD card can become an OS and application software that can directly start the device.
  • Support DMA and ULTRA DMA mode, suitable for DOS, NT4, WINDOWS98SE, ME, 2000, XP, VISTA, MAC, Linux systems..
  • Installation method:First install the SD card into the product slot, and then connect the hard drive data cable to the interface of the notebook hard drive. It can be operated and used after the power-on test is normal..
  • Note: for soft routing, the size of the SD card should be within 1G. For example, if WIN98, WIN ME, WINXP, and the system are installed, the SD card capacity should be more than 2GB. If you require high speed, please choose a high-multiplier flash memory card.Maximum support 128G SD card..
Check Stock

SD to IDE Adapter Small Memory Card to IDE Small Memory / TF Card to IDE 44Pin Male Adapter

  • COMPLIANCE WITH STANDARDS£ºSD to IDE adapter is compliance with standards: Memory card specification Ver2.0, IDE/ATA?33 specification. Products that meet the specifications are very suitable for your use..
  • STANDARD IDE INTERFACE£º44Pin male adapter hard disk adapter adopts standard IDE interface, true IDE mode, and supports DMA-33 transmission mode. The IDE interface is a 44-pin/2.0 mm male connector. This product is convenient for you to use..
  • TWO MAIN CONTROL CHIPS£ºThere are two main control chips on this board, and there is a memory card socket on the back. Advantages: small footprint, compact design and simple operation..
  • SYSTEM SUPPORTABLE£ºThe memory card can be included with the OS and application software, and the device can be directly activated.
  • Supporting DMA and ULTRA DMA mode for DOS / NT4 / WINDOWS98SE / ME / 2000 / XP / VISTA / OSX / Linux systems..
  • SPECIALLY DESIGNED£ºSmall memory card to IDE memory card has the characteristics of small size, large capacity, shock and moisture resistance, high temperature resistance, stable ....
Check Stock

Comimark 1Pcs SODIAL(R) 44-Pin Male IDE to SD Card Adapter

  • Provides an alternative for data storage and transfer or test for mainboard, sound card, display card and memory card, etc..
  • SD to IDE 2.5 Converter is ideal for some devices that required a fast and easy bootable device such as POS..
  • Enables IT engineers and embedded technology enthusiasts to use SD MMC card as a normal IDE hard disk..
  • Package Included:1Pcs SODIAL(R) 44-Pin Male IDE To SD Card Adapter(If there are any problems with the product, please send us pictures.Tell us more details about this problem.).
  • Thank you so much for your purchasing from our store.Any question ,please feel free to contact us..
Check Stock

FYSETC Display Screen SD-W-I-F-I with Card-Reader Direct BTT Wireless Cloud Transmission Module for Prus MK3S TFT35 V3.0 Ender 3 SKR Mini E3 3D Printer

  • Wireless transmission: a W-i-f-i-SD card adapter, Only supports 2.4G network, make sure the adapter and PC/Mac terminal connecting to the Same Network. Please note:Comes with a 8G card( detail user guides) in the package, not for using.Install is a little complicated, please reference the more information and other customers voice..
  • Usage: Make sure have a CH340 USB driver(search: FYSETC/CH340-Driver on Github) and a Arduino IDE software/Pronterface (Pronterface forces all caps, not good if SSID/PW has lowercase). Please refer to the product description at bottom for more details. Note: *Adjust the baud rate to 115200*on Arduino..
  • Based on ESP8266's low-power UART-W-I-F-I chip module. About the firmware. please search Github:FYSETC/ESPWebDAV..
  • Features: Maximum support 32GB of SD card.
  • The adapter uses a DHCP connection, please map its address as static in your DHCP server. Has the ability to operate in 802.11 B/G/or N modes. It is set to the "N" mode by default. To change modes requires modifying the firmware and re-flashing the device using the free Arduino IDE software..
  • Suitable for 24V 3D printer, such as Prusa MK3S,TFT35 V3.0, Ender 3,SKR Mini E3 V1.2 V2 etc. Need more help please email us, we will give you help within 24 hours..
Check Stock

Nikon D200 Digital Camera Memory Card 32GB CompactFlash Memory Card

  • 1. Need cf type ii slot. Supports sd/sdhc/sdxc all capacities..
  • 2. The eye-fi card will not work in canon 20d, 30d and 40d cameras when used with sd/mmc to cf adapter..
  • 3. A wifi sd card is required for wifi connectivity!.
  • 5. Supports cf true ide mode / memory mode / io mode..
Check Stock

Xiwai SATA Female to IDE 44Pin Converter Adapter PCBA for Laptop & 2.5 Hard Disk Drive

  • SATA Female to IDE 44Pin Converter Adapter PCBA for Laptop & 2.5" Hard Disk Drive  2.5 inch SATA SSD or HDD Drive to IDE 44pin converter Board.
  • Works with all SATA Drives up to 500GB  Supports IDE 66/100/133MB/s.
  • No need for an extra power supply.  44 Pin IDE connector powers the Drive no other cables or adapters are needed.  No driver needed, plug and play,....
  • Great for all Mini Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives.  Adapter is good for up grading an old....
  • Dimensions: 2.72" x 0.55" x 0.69" ( L 69mm x D 14mm x H 17mm ) Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux..
Check Stock

Tccmebius TCC-S865 USB 3.0 to SATA IDE Dual Slots External Transparent Hard Drive Docking Station with Card Reader and 2 Ports USB 3.0 Hub for 2.5 3.5 Inch IDE SATA I/II/III HDD SSD

  • Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 "/ 3.5" IDE / SATA I / II / III hard disk and SSD, Maximum support 8TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
  • Data transfer: Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard disk to your computer via USB 3.0 port, USB 3.0 data transfer rate up to 5 Gbps. Integrated card reader (TF card / SD card), at the same time card reader can read only one memory card, up to 64GB..
  • Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
  • WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius. In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support..
Check Stock

Hard Drive Docking Station, Tccmebius TCC-S862-US USB 2.0 to 2.5 3.5 Inch SATA IDE Dual Slots External Enclosure with All in 1 Card Reader and USB 2.0 Hub for 2.5\ 3.5\ IDE SATA I/II/III HDD SSD

  • Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 "/ 3.5" IDE / SATA I / II / III hard disk and SSD, Maximum support 8TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
  • Data transfer: Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard disk to your computer via USB 2.0 port, USB 2.0 data transfer rate up to 480MB / s. Integrated all-in-1 card reader (XD card / TF card / MS (Duo / Pro) card / CF card / SD card), at the same time card reader can read only one memory card, up to 64GB..
  • One-Touch Backup: One-Touch functionality makes it easy to copy data and documents from your computer to an external hard drive. For information on using the OTB feature and downloading the OTB software, please refer to the product guide. Note: OTB software cannot be installed on macOS and IOS systems..
  • Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT ....
Check Stock

Hosyond 5Pcs D1 Mini NodeMcu ESP8266 ESP-12F Wireless WiFi Module Internet of Things Development Board Compatible with Arduino/WeMos

  • It is a mini NodeMcu Lua Wireless development board based on ESP-8266..
  • Compatible with Arduino IDE and WeMos D1 Mini..
  • 4M bytes, 5V 1A switching power supply onboard,1MB flash memory.
  • 11 digital input/output pins, all pins with interrupt/PWM/I2C/1-wire support (except D0).
  • 1 analog input (3.2V max input). Micro USB connection..
  • D1 mini development board compatible with Arduino WeMos and can be programmed in the compatible for Arduino IDE..
Check Stock