Reviews Pcb Cutter Equipment

Cermant 3-Pin 5.08mm Pitch Male Female Plug-in PCB Screw Terminal Block Connector (5.08mm-3P-20Set)

  • Pin Number : 3 Pin Distance : 5.08mm/0.2"..
  • These PCB screws are snap together well.have a quick release capability.Just need to loosen the screws to land the wires.Use high-quality plastic PA66 high temperature resistant V0 flame retardant,steel screw environmentally friendly electroplating,no slippage.Widely used in electronics,communication equipment,instruments.
  • Package Content: 20 Set x PCB Terminal Block Connector.
Check Stock

Jienk 5Pcs 6-Pin 300V 10A 5.08mm Pitch PCB Mount Screw Terminal Block Connector for 28-12AWG Cable

  • 【Product Name】 6 Pin, Plug-In 5.08mm/0.2" PCB Terminal Block.
  • 【Rated Voltage】300V, Rated Current：10A.
  • 【Easy to Use】No soldering required. Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. Save you from solder trouble, no need to purchase expensive tool. Great time and money saver..
  • 【Application】: PCB terminal is widely used in electronic equipment, such as small electronic watches, calculates, general computer, communication electronics equipment automatic control system, domestic appliance and warning devices, etc..
Check Stock

250pcs Standoffs Nylon M2 M3 Male Female Hex Column Standoff Screws Nuts Assortment Kit for Communication Electroplating M3 Male Standoff A

  • 250pcs standoffs are made of durable environmentally friendly nylon PA66, which has stable and long-lasting acid resistance, alkali resistance, insulation and signal interference resistance..
  • The waterproof nylon spacer support is rust-proof and easy to clean. You only need to clean it with a cloth..
  • There are 4 different kits to meet your building needs, including various male or female brackets, nuts and screws..
  • Threaded standoff is very suitable for installation between the PCB circuit board and the machine board. It is very suitable for creating hot channels between chips, or creating multi-layer and multi-layer "nerd" homemade circuit board arrays..
  • They are not easy to slip when used correctly. It is very suitable for installing boards between PCB circuit boards and machines, and is widely used in communications, electroplating, medical equipment, office equipment, electronic products and other industries..
Check Stock

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine, 5.5-7.5W Laser Power, DIY Engraver Tool for Metal/Glass Etching Kit/Wood Carving, Engraving Accuracy 0.01mm, Area(15.74\x16.14\)

  • ...ce for Creative: LATITOOL F50 laser engraving machine can engrave various materials like metal, wood, bamboo, plastic, leather PCB board, aluminum oxide, lacquered metal, etc. You can create your own engraved work for your favorites, realize your imagination..
  • Excellent Laser Engraving Technology: LATITOOL F50 laser cutter with 5~5.5w output power with 0.08mm ultra-fine compression laser focus area, the engraving accuracy reaches 0.01mm, which makes more refined engraving process, it makes easy cut on wood and acrylic..
  • 180° Panoramic Visible：UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic viewing area, can be enjoy to watching your artworks producing..
  • Solid & Easy Installation Structure Design: Industrial grade steel structure design makes the laser cutter and engraver machine more reliable and improves engraving accuracy. The entire engraver tool adopts a modular design, which is convenient for users to assemble, repair, replace and update laser engraving machine parts. And the assembly can generally be completed within 10-20 minutes..
  • Large carving Area: 400*410mm (15*16 inch) Large engraving range to meet various DIY needs. Un....
Check Stock

RIKON Power Tools 50-151 Belt with 5\ Disc Sander, 1\ x 30\

  • Soldering Kit with Diagonal Wire Cutter - widely used for soldering projects, home DIY soldering, appliance, electrical and electronics repairs, circuit board welding, other fixing jobs, hobby crafts, etc.
  • Premium Quality – high quality solder iron tool, soldering iron stand with sponge, and all other accessories.
  • reliable adjustable soldering iron with heat-resistant cap and grip and with 5pcs soldering iron tips.
  • Bonus Accessories – desoldering pump, tweezers, insulating tapes, solder paste, wire cutter, heat shrink tubing, pen-shaped screwdriver, wires, mini screwdrivers, mini PCB, etc., and a downloadable ebook.
  • Durable and Convenient Carry Bag – the soldering kit for electronics that you wanted for home DIY package comes handy in a durable, easy-to-carry PU bag.
  • keeps all the components organized and easy to transport.
  • Satisfaction Guarantee – every purchase of this solder kit is backed by the manufacturer’s 30-day money-back / replacement guarantee and lifetime customer support, ensuring the customers’ high level of satisfaction.
Check Stock

Hao Pro Plug-in Screw Terminals Block Connector Pitch Good Solder Connect Tight Easy Insert Wire Reduce Confuse Handy for Panel PCB Breadboard Mount AC 150V 6A Green, 2.54mm-Green-2Pins-15Pc

  • Pin Number : 2 Pin Distance : 5.08mm/0.2"..
  • These PCB screws are snap together well.have a quick release capability.Just need to loosen the screws to land the wires.Use high-quality plastic PA66 high temperature resistant V0 flame retardant,steel screw environmentally friendly electroplating,no slippage.Widely used in electronics,communication equipment,instruments.
  • Package Content: 20 Set x PCB Terminal Block Connector.
Check Stock

VCELINK Small Wire Cutter Spring-loaded GJ706BL, Precision Flush Cutter Pliers Diagonal Cutters for Electronics, Jewelry Making, Model Craft and 3D Printer, 5-Inch

  • WIDELY APPLICATION - The micro wire cutter can be used to cut copper wire and aluminum wire≤4mm².
  • iron wire of Φ≤1mm, PCB board, zip tie, plastic burrs, jewelry craft, soft copper wire, soft iron wire, etc, not for steel wires..
  • SHARP CUTTING - The Fine Wire Side Cutter is made of carbon steel, not easy to oxidize and rust, has high hardness HRC51-53, sharp edge, neat cut, and is not easy to break, providing longer service life..
  • PORTABLE & LABOR-SAVING - Mini wire snip is ideal for working in small spaces and helps you to save force, depending on the sharp bevel design, and mini side cutters are small and portable. Ergonomic PVC handle, soft and non-slip, reduces fatigue and is suitable for long-time work..
  • ATTENTION - To ensure the durability of the cable tie cutter, do not use it to cut wire with higher hardness, strong wire such as steel wire, or hard iron wire..
  • CUSTOMER FIRST - You will get 1 × Miniature Wire Cutter. We always put our customer experience as our priority, and we also provide an 18-month warranty for all of our products. If you have any problems or a....
Check Stock

RIDGID 52363 K-400 Drain Cleaner, Gray

  • Drum capacity 100 feet (30,5 meter) of 3⁄8 inch (10 millimeter) diameter cable.
  • Standard equipment includes: 49002 - tool set [3/8 inch (10 millimeter) - k-400] (t-202 bulb auger, t-205 "C" cutter, t-211 spade cutter, a-13 pin key).
  • Standard equipment includes: 87582 - 3/8 inch (10 millimeter) x 75 foot (23 meter) iwcable.
  • Great fit for drain cleaners, service plumbers, facility and Institutional maintenance departments and property management companies.
  • Motor 380 watt, motor spins cable at 165 rpm and Voltage of 115.
Check Stock

Buspoll small phillips screwdriver flat head screwdriver 3mm head

  • Dimensions: Cutter head specification 3mm.
  • Magnetic: It easily attracts the screws and it is easy to remove the screws after removing them. Blackening treatment can effectively prevent rust..
  • Product features: Transparent PVC handle, knife rod made of high quality CR-V steel (chrome vanadium steel), classic appearance is simple and fresh..
  • High hardness: It is made of chrome vanadium steel and PVC. After being heat treated, chrome vanadium steel has high hardness, strong toughness and resistance, has strong corrosion resistance, oxidation resistance and extremely comfortable feel..
  • Scope of application: Screw cutter is a very commonly used screw assembly tool for screwing machine screws with slotted and cross-shaped holes, as well as wood screws and self-tapping screws. It is mainly used for the installation and maintenance of mechanical equipment, household appliances and power transmission equipment..
Check Stock

uxcell Plastic Round Rod,1/8 inch Dia 20 inch Length,Black FRP Fiberglass Round Rod Engineering Plastic Bar 5pcs

  • 【GOOD DESIGN】- 3mm(1/8") diameter 50cm (20") length fiberglass round rod.
  • 【GOOD MATERIAL】- Plastic rod made in FPR,Light weight, high strength, convenient for transportation and construction installation.
  • 【FEATURE】- FPR round rod has good electrical insulation, high impact resistance, and strong designability. It has good safety, It is one of the new alternative materials for modern industrial and agricultural products..
  • 【ADVANTAGES 】- Corrosion resistance, aging resistance, long service life, in a humid environment, its service life can more than 15 years..
  • 【APPLICATION】- Fiberglass Plastic round rod Widely used for tents, bags, umbrellas, sails, fitness equipment, arrows, clubs, advertising display racks, windmills, fan stands, , transmission shafts of PCB equipment, sea sports equipment or DIY..
Check Stock