Reviews Original Pcb - BestBuyersPro.com

IDE to SATA Adapter, Upgrade PCB Hard Drive or Optical Drive Adapter Converter Kit for Sony PS2, IDE Original Network Adapter for Game, Purple

★★【SPECIFICATION】❶Item Type: Adapter❷Material: for PCB❸Color: Purple❹Weight: Approx. 13.0g/0.5oz❺Application: Sony PS2 IDE original network adapter..
★★【SUITABLE FOR SONY PS2】Precise cut, perfect fitness, suitable for Sony PS2 IDE original network adapter..
★★【SATA HARD DISK】A large‑capacity for sata hard disk is used to replace the IDE hard disk to play the game, which will save us a lot of game loading time..
★★【PCB BOARD MATERIAL】High‑quality for PCB board material, with fast operation speed and excellent performance..
★★【EASY TO INSTALL】Equipped with mounting screw pack, which makes it easy to install and detach.Small and lightweight, convenient for us to storage and a good replcement accessory..

Package Included: 1x plate.There is no screws and copper stand included..
Pls note: Original GK61 GK61x GK61xs plastic case can't use this plate directly.Need to replace a GH60 compatible case.
This plate is anodized brush finished.It can only use with plate mounted stabilizers.
If you use with GK61 /GK61x PCB,can just mount 4-5 switches into the plate corner and then plug to PCB socket totally.After the plate PCB fixed,then mount other switch in 1 by 1 is ok.At last screw plate PCB togehter to GH60 size case is ok with the screws in your case..

【Product Function】 Using this product can eliminate the cavity sound of the keyboard, increase the thickness of the tone, and reduce the resonance....
【Easy Installation 】Install directly between PCB and steel plate without adhesive. And will not affect the light position of the keyboard..
【Material】Made of soft sponge material, with high-efficiency noise reduction effect, and will not damage your PCB board..
【3mm Thickness】Because the distance between the PCB and the positioning board is between 3mm and 3.5mm, this 3mm silencer pad is the best choice....
【Warm Tips】This silencer pad is drawn based on the actual measurement of the keyboard. It is not manufactured by the original factory and cannot....

Package Included:Purple CNC Case + Screws + Brass Bolt + Rubber Feet.
Both GK61 GK64 wired and Bluetooth edition is compatible with this case Plate.
For GK61 GK64 original plastic keyboard,if you want to replace with this case,please order case plate kit together,original plate is bigger than normal size CNC case.
For GK61 GK64 PCB,pls use brass bolt and M2-6 screws,For Normal GH60 PCB,just use M2-5 screwed to the case directly.

... of the plate, the space between the PCB and the positioning plate ranges from 3mm to 3.5mm. Regardless of whether the keyboard switch is welded or hot-plugged, the 3mm silencer pad is the best choice..
【Warm Tips】This silencer pad is measured and drawn according to the keyboard entity. It is not produced by the original manufacturer and cannot be guaranteed to be fully fitted. Some of the holes, gaps, and circles may be caused by too many models and brands of the same configuration and different designs. The hole is deviated. Please check carefully before placing an order..

PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass..
Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs..
Note: This is not original Arduino product.it only a substitute accessories from ARCELI.

Best ChoiceGreat replacement for your broken or defective DVD drive.Compatible with Nintendo Wii models.
Compatible WithComplete Unlocked D2A D2B D2C D2E DVD Drive For Original NINTENDO WII With PCB Board Already Installed (2 PCB Board)..
Plug-and-Play UnitHigh Quality DVD Drive Replacement Repair Part for Nintendo Wii . Please note:It can load DVD game ONLY. (cannot read DVD movies)..
Easy to InstallSuper easy to install, even kids can single install.Try-Wing Screwdriver Is Required To Open Up a Console..
Buy it Risk-FreeComes with 24 months quality warranty and 30 days money back.We will do everything we can to ensure you are COMPLETELY satisfied with your purchase. Refunds , exchanges and all. You are Guaranteed to be happy. If you meet any issues, please let us know. We are always available to help you..

Li-ion Battery Plastic Case M18 Shell Charging Protection Circuit Board For Milwaukee 18V M18 48-11-1815 3Ah 4Ah 5Ah PCB Board.
only have Circuit Board(PCB) Plastic Case ,Screw, Spring (NO BATTERY).
Completely protection and replacement for original Battery.
Designed 100% compatible and easy to repair the broken circuit board.
Quick-responding technical support for free.

[More Compatibility] This USB C 3.2 SSD enclosure support for apple Mac SSD with 12+16PIN which was original factory-installed. NOT SUPPORT Toshiba 12+16PIN SSD and all SATA SSD. NOT compatible with Third-party SSDs, including OWC SSDs. Support M.2 Nvme SSD after installing the enclosed interface adapter..
[Faster Data Transmission] 10Gbps transmission speed with USB 3.2 Gen2 interface. Save and transfer data in a seconds. It can also reach 20Gbps transmission speed with USB 3.2 Gen2x2 if the computer supports..
[Friendly Design] Aluminum alloy case for quicker heat dissipation. ACASIS USB C 3.2 SSD enclosure is sturdy and portable..
[System Requirements] ACASIS USB C 3.2 SSD enclosure supports Windows7/8/10/11,Mac OS 10.0,Linux 2.6 or later.Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro.
[Easy Installation] Just take out the PCB board from the enclosure,then fully insert SSD to card slot of the PCB board, put PCB back into the enclosure,tighten the screws.Plug and play, support hot plug.On Windows OS, hard disk will not available on "This PC"/ "My computer.

Replace the spindle mount with a new 52mm aluminum alloy mount..
Replace the 775 spindle with a 200w brushed spindle motor..
Use the original power supply system, No additional power supply system is required..
Capable to carve Aluminum, Copper, Wood, Acrylic, PCB, etc..
Remove the original Z axis and replace the new one, it's done..