Reviews Machining Center
10Pcs Center Drill Bit Set High Speed Steel 4341 Straight Shank Center Drill Bit Combo Drilling Tools 2.5mm for Hole Processing
- ★High Precise Positioning: This high speed steel center drill bits is mainly used for the prefabricated precise positioning of hole machining, guiding twist drills for hole machining, thereby effectively reducing errors.
- ★Used for: Use a center drill to make a conical hole for the center of the lathe as a starting point for a standard twist drill. Can be used as a starting hole to prevent the drill bit from deviating from the original route. Used for center cages that need to be processed between parts or workpieces.
- ★High Performance: This center drill bit is made of high‑quality high-speed steel material, with high hardness and good wear resistance, strong and durable, has a long service life. With good applicability, stability, high processing efficiency, long life expectancy, etc..
- ★Widely Used: This center countersink drill bit are good for most general purpose applications, which can not only be used on a lathe, but also can be installed at the end of the workpiece in the center of the lathe.
- ★Note: Please allow slight error due to manual measurement. Thanks for your understanding.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Check StockSpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated
- 【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
- Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
- For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
- 【5】Number Of Flutes:2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
- 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
- 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
Check StockBONYTOOL Dovetail Milling Cutter HRC55 Coated Tungsten Steel Carbide Slotting End Mills 75° 60° 45° Chamfering CNC 4 mm -60°
- Material: Tungsten steel, high hardness and good toughness.
- Rugged construction, durable with long service life.
- Milling cutter end mills machining hardness: HRC up to 55 degree.
- Applicable machine tools: CNC machining center, CNC machine tool, engraving machine, fine engraving machine, high speed machine, etc.
- Applicable materials: stainless steel, die steel, ductile cast iron alloy steel, mixing steel, titanium alloy, etc..
Check StockAcratech GXP Ball Head w/ Knob Clamp
- 【Low Profile More Stable】The ball head is designed with a low center of gravity, CNC machining, 44MM large ball diameter, making it extremely....
- 【Excellent Quality】The low profile ball head adopts all-metal structure, 0.1MM machining tolerance, anodic anodized, ultra-high-strength aviation....
- 【Excellent Design】Double grooves and lightweight design. The maximum load-bearing capacity of this low profile ball head camera mount is 44....
- 【Precision Adjustment】4 * 90 degrees, 5 degrees per scale, and double spirit bubbles to meet the needs of accurate photography and Panoramic....
- 【Widely Applicable】3/8"screw holes at the bottom of the ball head and easy to install tripod, monopod, camera slider and mini tripod. With 1/4"....
Check StockTHK Cross Roller Guide V6-600 VR6-600×41Z 6600T
- There are 10pcs of this center drill bit, which is convenient and practical for user, easy to use..
- This centering drill bit is made of high‑speed steel with high hardness and hardness..
- The center drill is suitable for bench drills, milling machines, and machining centers..
- The 3mm center drill is incisive, wear‑resistant, heat‑resistant, and has a long service life..
- Adopt enlarged chip flute design is conducive to high‑speed operation and accelerate chip removal..
Check StockHigh Hardness Household Carbon Steel Sliding Barn Door Floor Roller Guide with Bearing Hardware Fittings
- Adopt enlarged chip flute design is conducive to high‑speed operation and accelerate chip removal..
- The center drill is suitable for bench drills, milling machines, and machining centers..
- The 3mm center drill is incisive, wear‑resistant, heat‑resistant, and has a long service life..
- There are 10pcs of this center drill bit, which is convenient and practical for user, easy to use..
- This centering drill bit is made of high‑speed steel with high hardness and hardness..
Check StockYWBL-WH 10Pcs Center Drill Set 2.5mm AType Stainless Steel Drill for Special Processing Industrial Supplies, Center Drill
- The workshop center drill is suitable for bench drills, milling machines, and machining centers..
- This center drill is made of highspeed steel with high hardness and hardness..
- The 2.5mm centering drill is incisive, wearresistant, heatresistant, and has a long service life..
- With enlarged chip flute design is conducive to highspeed operation and accelerate chip removal..
- There are 10pcs of this center drill bit, which is convenient and practical for user..
Check StockCenter Drill Bit Set - 5Pcs Countersink Lathe Mill HSS 60 Degree Combined Center Drill Bit Mill Tooling Set for Wood Metal Alloy
- PREMIUM QUALITY - The center and spotting drills are made of durable high speed steel for providing wear resistance and remove chippings clearly and long service life..
- PRODUCT FEATURE - The bits with the 60°countersink angle have double ended design.Center drill bit can be used to process the centering hole and countersink of general material..
- SPIRAL FLUTE - The combined center drill bits are design with spiral groove, decreasing friction and heat, which can help clear chips and debris away from the bit quickly. It is a useful tool for DIY amateur..
- EASY TO USE - Easy to install and change bits fast.5pcs bits for you to choose a match type to drill 10 different countersinks..
- WIDELIY USE - These center bits are used for producing center holds in components or work pieces with require machining between centers. Suitable for guiding twist drill for processing hole to reduce error..
Check Stock46mm Low Profile Tripod Head with 3 Screw Adapter 3/8 to 1/4 Professional Aluminium 360 Rotating Panoramic Ball Head Max Loading 44lbs/20kg
- 【LOW GRAVITY CENTER&ULTRA SOLID AND STABLE】: The ball head is designed with a low center of gravity, Durable anodized and CNC machining 46mm large ball diameter makes it extremely stable and the security slot protects your camera at all times. Tripod head Weights Only 0.38kg/0.84lbs, but Provides 55.1 lbs/ 25Kg Loading Capacity.
- 【360 DEGREE PRECISION ADJUSTMENT PANORAMIC BALL HEAD】: U-shaped notch design make you can easily switch into vertical shooting from horizontal rotation flexible operation, making shooting faster switching. base is finely laser-engraved in 5° increments from 0°-360° for tracking progressive panning, The 360° horizontal scale is convenient for photographers to take multi-shot panoramic photography.
- 【EXCELLENT LIGHT WEIGHT DESIGN DESIGN】: The low profile ball head adopts all-metal structure and Hollowed out quick release plate clip, 0.1 mm machining tolerance, anodic anodized, ultra high strength aviation aluminum alloy. It’s solid, stable and high quality.
- 【WIDE COMPATIBILITY】: The ball head can be used with tripod, monopod,camera slider,for installing camera, DV, mobile phone, telescope. 1/4 " screw quick shoe plate screw and a 3/8 " thread tripod mount screw. Quick release plate compatible with Acra RRs, ....
Check StockKEO #5 Combined Drill & Countersink - Carbide Carbide RH 60 Plain Str
- KEO plain type solid carbide combined drill and countersinks with straight flute are used for producing center holes in components or workpieces which require machining between centers..
Check Stock