Reviews Machining Center Tool Instrument

10Pcs Lathe Mill Center Centering Drill Bit Set HSS 60 Degree Combined Countersink Bits

  • 【High Quality Material】 The product is made of high-quality high-speed steel materials, double-edged, standard milling angle of 60 degrees, durable..
  • 【Safe to Use】The product is manufactured in accordance with strict quality standards before leaving the factory, with good safety performance and can be used with confidence..
  • 【Precision Machining】Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts..
  • 【Lathe Mill Center】The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating..
  • 【Quality Service】 We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..
Check Stock

Hss Center Drill, High Hardness Angle 60 ° Center Drill, for Industry Drill

  • Each center drill has a double end and with standard milling Angle 60 °.
  • Used for parts that need to be machined between production centers or work piece center holding.
  • Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts.
  • The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating.
  • These center drill set are made of high speed steel, high hardness and durable in use.
Check Stock

Center Drill Bit Set - 5Pcs Countersink Lathe Mill HSS 60 Degree Combined Center Drill Bit Mill Tooling Set for Wood Metal Alloy

  • PREMIUM QUALITY - The center and spotting drills are made of durable high speed steel for providing wear resistance and remove chippings clearly and long service life..
  • PRODUCT FEATURE - The bits with the 60°countersink angle have double ended design.Center drill bit can be used to process the centering hole and countersink of general material..
  • SPIRAL FLUTE - The combined center drill bits are design with spiral groove, decreasing friction and heat, which can help clear chips and debris away from the bit quickly. It is a useful tool for DIY amateur..
  • EASY TO USE - Easy to install and change bits fast.5pcs bits for you to choose a match type to drill 10 different countersinks..
  • WIDELIY USE - These center bits are used for producing center holds in components or work pieces with require machining between centers. Suitable for guiding twist drill for processing hole to reduce error..
Check Stock

60W Mini Rotating Lathe,12000RPM Metal Rotating Lathe,Mini Lathe Machine Lathe Machine Tools,for Wood Metal Glass Plastic Machining

  • ?¡¾PRODUCT PARAMETER¡¿ ?Motor Speed: 12000rpm ? Input Voltage/Current/Power: 12V DC/5A/60W ?Axis X travel: 32mm.
  • Axis Z travel: 145mm ?Max Diameter of Machined Material: 100mm ? Machining Accuracy: 0.05mm..
  • ?¡¾MAIN PARTS¡¿ Headstock, tailstock, long machine bed, big slider, small slider, motor blade, gear, connection block, belt cover etc. All of the parts are made of metal except belt cover..
  • ?¡¾GOOD PERFORMANCE¡¿Maximum motor power is 60W by using more powerful motor.With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining..
  • ?¡¾POWERFUL FUNCTIONS¡¿Motor case and headstock are jointed. Axis Z slider can spin 180¡ã.Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal..
  • ?¡¾USE RANGE¡¿ Lathe tool is made of high speed steel material, which can machine soft metal, nonferrous metal and precious metal..
Check Stock

10Pcs Center Drill Bit Set High Speed Steel 4341 Straight Shank Center Drill Bit Combo Drilling Tools 2.5mm for Hole Processing

  • ★High Precise Positioning: This high speed steel center drill bits is mainly used for the prefabricated precise positioning of hole machining, guiding twist drills for hole machining, thereby effectively reducing errors.
  • ★Used for: Use a center drill to make a conical hole for the center of the lathe as a starting point for a standard twist drill. Can be used as a starting hole to prevent the drill bit from deviating from the original route. Used for center cages that need to be processed between parts or workpieces.
  • ★High Performance: This center drill bit is made of high‑quality high-speed steel material, with high hardness and good wear resistance, strong and durable, has a long service life. With good applicability, stability, high processing efficiency, long life expectancy, etc..
  • ★Widely Used: This center countersink drill bit are good for most general purpose applications, which can not only be used on a lathe, but also can be installed at the end of the workpiece in the center of the lathe.
  • ★Note: Please allow slight error due to manual measurement. Thanks for your understanding.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Check Stock

Drill America-DMOCCD2-60 2 Solid Carbide Combined Drill Bit and Countersink DMO Series

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Used for producing center holes in work pieces which require machining between centers.
Check Stock

Guitar Frets Wire Stainless Steel Fretwire Set for Electric Guitar Bass Guitar Fingerboard 2.7mm Width 24 Frets

  • EASY TO INSTALL: Easy to install and remove..
  • PREMIUM MATERIAL: This item is made of quality copper, high strength and durable.Elegant chrome color / Bright tone / Delicate surface, Great for new guitar building or guitar repair work!.
  • FINE MACHINING: Pre-radiused to 9.5" ,you can bend it to match your instrument. Fine machining ensures sleek surface and edge of the fret crown, won't harm the fretboard and strings..
  • GREAT ACCESSORY: It works with 24/22/21/20 or other frets. The most popular size for fender, gibson electric guitar, acoustic guitar or bass guitar. Fit for ST,Tele, LP, SG electric or acoustic guitar..
  • 100% WORRY-FREE GUARANTEE: 100% satisfied 24-hour dedicated customer service. If you are not satisfied with our products, you can do the refund..
Check Stock

Drill America - DEWCCDS1-6 6 Piece High Speed Steel Combined Drill Bit and Countersink Set (#1 - #6), DEWCCD Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Used for producing center holes in work pieces which require machining between centers.
Check Stock

Face End Mill, Mt3-Fmb22 Holder Extension 400R50-22 Face End Mill Cutter 10Pcs Apmt1604 CNC Carbide Inserts for Plate Cutting Heavy CNC Milling Cutting

  • HIGH-PRECISION MACHINING: Hardened high-precision shock resistance, good permeability, multiple impact resistance, good low temperature impact toughness, strong and durable, can increase the service life and shock resistance of the cutter head.
  • GOOD IMPACT RESISTANCE: Our end mills are ideal for heavy duty CNC milling, Model: 400R--Bore: 22--Number of Inserts: 4--Type of Insert: APMT1604--Number of Inserts: 10 Pieces.
  • MACHINING RANGE: This MT3-FMB22 holder has better cleanliness and more stable precision, can be used for sheet metal cutting, hardened inserts for steel.
  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection holes are connected more tightly, reducing machining errors.
  • WIDE RANGE OF APPLICATIONS: Lathe extension rods are the main accessories commonly used in milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

Sandvik Coromant LF123E059-16B Steel CoroCut 1-2 Shank Tool for Parting and Grooving Holder, 0.1\ Maximum Depth of Cut

  • CoroCut 1-2 1.000" Square Shank External Machining - Shank Tools.
  • Square Shank Parting and Grooving Holder CoroCut Tool Holder.
  • Clamp screw: 3212012-259 Key 5680043-14 Coolant Nozzle Additional spare parts.
Check Stock