Reviews M14 Tap Set

WYNNsky Die and Tap Set in SAE and Metric Hex Threading Dies for External Threads Thread Tap for Internal Threads Thread Wrench Thread Pitch Gauge 86 Pieces Gauge Kit for DIY Tapered

  • Threading Dies and Tap Size: Metric Size M3×0.5, M4×0.7, M5×0.8, M6×1.0, M7×1.0, M8×1.0, M8×1.25, M9×1.25, M10×1.25, M10×1.5, M11×1.25, M11×1.5, M12×1.5, M12×1.75, M14×1.5, M14×2.0, M16×1.5, M16×2.0.
  • SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF..
  • Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt..
  • Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
Check Stock

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

Qjaiune 2pcs M14x1.5 Tap M14 Metric Thread Tap Right Hand Thread Tapping Tool HSS Thread Milling Taps M14 x 1.5 Taper & Plug Tap

  • ✿M14x1.5 Machine Tap: This mini thread tap has a standard size, which can machine threads on most metals, and can also be used to repair damaged or blocked threads..
  • ✿High Quality Material: Metric tap is made of high-quality high speed steel, with high hardness and strong wear resistance. It can be used on tapping machines, drilling machines and CNC lathes..
  • ✿Wide Range of Application: M14 x 1.5 tap has high hardness and can be used for thread processing on metal, iron, copper, aluminum alloy, stainless steel, zinc and other metal materials..
  • ✿Package Contains: 2 x M14x1.5 Metric Tap (Taper & Plug Tap), Thread Diameter: 14mm, Pitch: 1.5mm, Total Length: 2.91 Inch / 74mm, Working Length: 1.26 Inch / 32mm, Shank Diameter: 0.42 Inch / 10.6mm..
  • ✿About Service: We are committed to providing customers with high-quality products. If within 30 days you are not 100% satisfied with the product, such as buying the wrong size, please feel free to contact us, we will within 24 hours provide you with a satisfactory solution..
Check Stock

Spark Plug, 2Pcs Carbon Steel Spark Plug Thread Insert Tap Set M101.0 / M121.25 M141.5 / M181.5

  • 【Brand New】100% brand new high quality spark plug repair tool, strictly full tested to ensure the best quality before shipment, safe to use..
  • 【Great for】The spark plug tool is a good tool for repairing damaged spark plug installation threads..
  • 【High Quality】The spark plug tap tools are made of quenched carbon steel,these accessories have strong strength and long durability..
  • 【Practical】The sizes of tap tools are M10 * 1.0 / M12 * 1.25, M14 * 1.5 / M18 * 1.5..
  • 【Easy to Use】Re-thread tool is easy to use and operate. Let's have a try..
Check Stock

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

  • ...epair Tool Kit is a time-saving kit that allows you to cut threads to fix a stripped and damaged 14mm spark plug threaded hole port and repair plug configurations in aluminum heads.
  • Socket includes metal retainers to keep plug held inside during install and removal.
  • VARIOUS APPLICATIONS: Chrome-vanadium steel (CR-V) M14 x 1.25 internal thread size on repair sleeve suitable for damaged spark plug threads to clean and rethread spark plug ports on a BMW vehicle and some Nissan and Toyota engines.
  • As long as the head is aluminum and the spark plug hole is straight with room to turn the tap using either a ratchet or wrench, this kit will allow you to repair plugs without removing the head.
  • EASY TO USE: Rotate the crankshaft to make sure no ports/valves are open, use the tap to install new threads, choose the proper depth of insert, and screw it firmly into the newly tapped head.
  • Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
  • PERFECT SIZE: 14mm reamer with 12 points.
  • Use with 3/8-inch drive ratchet or wrench.
Check Stock

M31 Wheel Stud Alignment Guide Tool Set - 5 Pack Wheel Hanger Tool for Wheel Mounting Guide

  • Wheel bolt pilot pin guide tool set makes mounting wheels and tires effortless.
  • Wheel hangers allow you to hang the heavy wheel without holding it in place in order to line up the wheel with the correct hole.
  • One set with 5 sizes covers a wide range of vehicles: M12 x 1.5 (female), M12 x 1.50, M14 x 1.25, M14 x 1.5, M16 x 1.5 (see vehicle fitment below).
  • Useful tool to prevent the wheel from falling and causing damage or back injury.
Check Stock

ComeFloor Angle Grinder Attachments Drill Adapter 5/8 inch 11 Female to M14 Male 12,000 RPM Rated Wire Wheel Adaptor Compatible with Dewalt, Makita, Milwaukee Ryobi Tools

  • Heavy-duty, solid steel, commercial grade adapter for using a European attachment (Metric 14) on North American 5/8"-11 angle grinder, grinder saw, concrete angle grinder. 12,000 RPM rated. Female side is 5/8"-11 and male side is M14 threaded. Mortar rake adapter.
  • M14 side is 0.75 inch long. You can use M14 Threaded Mortar Rake, Diamond Tools, masonry hole saw, drill grinder attachment, polishing rake, polisher attachment, diamond wire saw, hole saw drill attachment with your standard American 5/8" 11 threaded power tools.
  • If you have a 5/8"-11 standard North American power tool, this american to european adapter will help you use M14 (metric 14) a female threaded wheel polisher drill attachment, diamond core drill bit, hole drill attachment, angle grinding wheel, angle grinder polisher..
  • Standard small hand polisher can utilize this angle grinder arbor adapter or M14 drill adapter for a polishing spindle, metric hole saw, mortar rake..
  • This adapter is designed for European M14 tool attachments to be used with North American power tools with 5/8 inch-11 threaded spindles. 5/8 inch-11 thread is the standard for North American Tools Metric 14 (M14) is very common for European Tools.
Check Stock

Aramox Tap Tool,2Pcs Carbon Steel Spark Plug Thread Insert Tap Set M101.0 / M121.25 M141.5 / M181.5

  • 100% brand new and high quality spark plug thread insert tap repair tools.
  • With the size of M10 * 1.0 / M12 * 1.25, M14 * 1.5 / M18 * 1.5.
  • A nice tool kit for repair damaged spark plug installing threads.
  • Made of hardened carbon steel, these accessories are of strong strength and long durability.
  • Easy to use and operate. Come and have a try.
Check Stock

CNRAQR Spark Plug Gap Tool - 1 Set with Feeler Gauge (14mm Thread)

  • Perfect Tool for Boosters, Great Gift for DIY Mechanics - Small, portable and solves a real problem..
  • Compatible With M14 x 1.25 Threaded Spark Plugs ( 14mm M14)..
  • Simply put the spark plug in one end and twist the knob at the other to apply smooth, even, and easy pressure to close the gap until the right measurement is found..
  • The easiest way to improve your workbench and boost engine performance - top tier auto performance is constantly evolving, our plug allows you to never have such out dated worries again while setting your spark plug gap. Just set it, forget it, and go enjoy the open road..
  • Includes 1x Spark plug gap tool - 1x Feeler Gauge..
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock