Reviews Unique Tap Set

Irwin Tools Tap and Drill Sets, 13-Pieces

  • This tap and drill bit set produces a thread that is strong and easy to tap.
  • High-carbon steel plug taps are great for general-purpose threading.
  • 135° split-point drill bits give fast, precise drilling.
  • Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.
Check Stock

H.S.S. Tap & Drill Full Bundle, UNC, UNF and Metric

  • 3 H.S.S. Tap & Drill Full Bundle for almost all cases..
  • 18 Pc H.S.S. Tap and Drill Set, Unf in Metal Box, 0001-0050.
  • 18 Pc Hss Tap and Drill Set, Metric, 0001-0052.
  • 18 Pc H.S.S. Tap and Drill Set, U.N.C, 0001-0040.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock

Plush Toys 2pc

  • Material: Plush dolls are made of high quality PP cotton material..
  • Tips: If you received the vacuum packaging, please open the package and set aside, or tap it, you can restore the full and swollen stat.
  • Sans: Height 22cm/8.5inch, Very very cute.
  • Orange: Height 27cm/10.5inch,Very very cute.
  • Unique Design: Easy to carry, easy to use, cute look, plush doll unique design, cute and collectible.
Check Stock

Neiko 00916A 45 Piece SAE Tap & Die Set, SAE Tap and Die Set, Tap Set, Rethreading Kit, Pro-Grade Large Tap and Die Set, Titanium Threading Tools, Thread Chaser Set, Tap & Die Set Standard

  • HEAVY DUTY TAP & DIE SET: Titanium cutting edges hold sharpness up to 20x longer than steel, making this a perfect SAE tap and die set for any project, big or small..
  • VERSITILE: Create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper, and stainless steel with this tap and die kit..
  • DURABLE STORAGE CASE: This large tap and die set standard is fully equipped in a heavy-duty molded case for easy identification, storage, and portability for all your jobs on the go..
  • PREMIUM MATERIAL: Our SAE thread chaser set is made of a professional grade steel, highly durable and built to last for multiple uses. This tap set is perfect car repairs, DIY projects, and much more..
  • COMPLETE SET INCLUDE: This rethreading kit comes with the most popular SAE taps & dies. T-handle tap wrenches, adjustable die wrench, screwdriver, and thread pitch gauge..
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock

Muzerdo 115PCS Sae and Metric Bearing Steel Tap and Die Rethreading Kit with Metal Box

  • Tap and Die Bit Diversity – These tools are sold as a set for good reason. You really should look to get as much diversity in the sizes of the taps and dies as you can. That way you will be able to pull the right size out of the box when you need it..
  • Wrenches – All tap and die bits need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
  • Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more.
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
Check Stock

Toolly 32pcs Tap and Die Set, Metric Hardened Steel Tool Set, Essential Threading & Rethreading Tool with Storage Case Perfect for Auto and Machinery Repair

  • 【32pcs Tap and Die Set】The package includes 28pcs (each size including 1x taper tap, 1x second tap, 1x plug tap and 1x die): M3 X 0.5, M4 X 0.7, M5 X 0.8, M6 X 1.0, M8 X 1.25, M10 X 1.5, M12 X 1.75.
  • 1 x Tap Wrench, 1 x Die Stock Wrench, 1 x Thread Pitch Guage, 1 x Screwdriver, to cover all your needs..
  • 【Product Function】Tap and die set in metric is perfect for rethreading fasteners, fastener holes for auto and machinery repair. Threading tool with storage case, can greatly increase your productivity and act as an important part to your work..
  • 【Tapered Teeth Design & Versatility】Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily. Perfect for creating new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel..
  • 【High Quality & Durable】Tap and die set adopts premium hardened steel material. The screw thread tapping tool is durable to use. The better the material the tougher the tap and die so they ensures durability and tool longevity to withstand professional uses..
  • 【SIZE LABLED】All of them are clearly labled with size for you to find quickly, and be able to pull the right size out of the box when you ....
Check Stock

Fafeicy Stripped Screw Remover, Tap Extractor Set, High Speed Steel Steel Broken Head Taps Remover, Stripped Screw Tap Extractor Set, for Removing Screws and Bolts(six-piece set)

  • Tap Extractor Set is made of superior high speed steel, high hardness and anti-corrosion..
  • Each Tap Extractor is specifically engineered for speedy grab-it and easy out broken screw taps..
  • Tap Extractor Set works for removing stripped, rusted, broken, or corroded screws and bolts..
  • Every tap extractor goes through rigorous quality testing, durable to use..
  • Tap Extractor Set is suitable for industrial screw and bolt removal and for everyday home repair work..
Check Stock

szgate 5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS MetricImperial Plug Drill Bits Hand Tools 6-32NC, 6-32NC (3.5mm)

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock