Reviews Lath Ceiling

HLOFIZI 6-3/8 Hole Saw for 6\ Recessed Lights, Carbide Grit Holes Saw Cutting Plaster Drywall Ceiling Sheetrock, Green

• LONG LIFE - Hard tungsten carbide grit hole saw edge for a longer life in abrasive materials. Open back design allows for quick and easy plug removal.
• FAST EASY CLEAN CUTTING - HLOFIZI 6-3/8 Hole Saw for Recessed Lights allows for smooth cut hole in ceiling plaster and dry wall. Continuous rim for clean cut without chips or cracking the plaster.
• PERFECT HOLE SIZE - Solid welded construction helps provide accurately sized holes for recessed lighting, leaves just enough space that 6" can light fixture fits.
• MULTI-APPLICATION - Perfect cut through drywall, plaster, lath and plaster, wood and stucco.This hole saw for plaster for any recessed light installation job.
• Satisfactory Service: If our HLOFIZI Carbide Grit Holes Saw you received is defective or unsatisfactory. We sincerely apologize and will definitely send you the new ones in no time. We appreciate all your remarks and comments. They are the key tools to develop and improve our handmade and heartcrafted products.

2000 Pcs #8 x 1 K Lath Mod Truss Sharp Point 305 SS ACQ Rated Low Profile Deck Screw - U-Turn

• #8 x 1" K Lath Mod Truss Sharp Point 305 SS ACQ Rated Low Profile Deck Screw.
• A steel fastener with an extra wide head, twinfast thread, and a piercing point. Common Usage is to attach lath to wood studs or light gauge metal..
• 305 STAINLESS STEEL - A Nickel-Chromium grade of stainless steel that is used outdoors for high corrosive applications. ACQ Compatible.
• Head Diameter: .404" - .441" | Head Height: .070" - .083".

Dunzy 150 Pcs 1 Inch Plaster Drywall Washers Metal Washers for Screws Plaster Repair Rings Plaster Buttons Profile Washer Flat Washers for Wall Ceiling Drywall Plaster Repair

• Sturdy Material: the plaster washers are crafted with steel and with zinc plated, and drywall screws are made of steel, which are sturdy and well made, and can serve you for a long time.
• Size Details: the plaster repair washers are about 1 inch in outer diameter, 5/32 inches in center hole, and screws are 1 inch in length, appropriate size for you to use.
• Complete Set: the package comes with 150 pieces of plaster repair rings in silver and 150 pieces of drywall screws in black, enough quantities and a nice set can meet your daily use needs, also can be kept as spare for accidental use.
• Helpful and Required: you can use these plaster buttons to fix the plaster against the lath, which can avoid sagging and cracking, maintaining your wall and ceiling in good condition.
• Toolbox Essentials: coming with small size and lightweight, the metal washers and screws can be easily stored in your tool cabinet, occupying a little space, convenient for you to take out as needed.

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

• Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
• ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
• REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
• it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
• HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
• MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

• Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
• ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
• REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
• it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
• HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
• MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

• Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
• ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
• REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
• it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
• HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
• MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....

1000 8x1-5/8 Phillips Modified Truss - Black Oxide

Tabbed Lath Washer 1-1/4 Diameter Galvanized 1,000 Box

• Used for the Attachment of Metal and Plastic Lath, Plaster Repair, Insulation Board, and Gypsum Sheathings.
• 4 Keyholes for Bonding of Plaster and Basecoats.
• 4 Tabs for Pre-Spotting Washer into Soft Material Such as Insulation Board.
• Center Hole will Accommodate Screws to #12.

Studpop Magnetic Stud Finder

• Outperforms expensive electronics, find studs in seconds, works on all types of construction.
• Unlike other stud finders, its indicator moves and clicks when a metal fastener is found..
• No false positives, no batteries, no calibration, no mistakes, locates stud edge and center.
• Works on sheetrock, tile over sheetrock, sheetrock over sheetrock, plaster, wood lath, paneling.
• Sheetrock ceilings, wood or metal studs, contains 1 inch diameter super magnet, made of strong ABS plastic.

StudPoP On the LEVEL magnetic stud finder