Reviews Stucco Lath

HLOFIZI 6-3/8 Hole Saw for 6\ Recessed Lights, Carbide Grit Holes Saw Cutting Plaster Drywall Ceiling Sheetrock, Green

  • LONG LIFE - Hard tungsten carbide grit hole saw edge for a longer life in abrasive materials. Open back design allows for quick and easy plug removal.
  • FAST EASY CLEAN CUTTING - HLOFIZI 6-3/8 Hole Saw for Recessed Lights allows for smooth cut hole in ceiling plaster and dry wall. Continuous rim for clean cut without chips or cracking the plaster.
  • PERFECT HOLE SIZE - Solid welded construction helps provide accurately sized holes for recessed lighting, leaves just enough space that 6" can light fixture fits.
  • MULTI-APPLICATION - Perfect cut through drywall, plaster, lath and plaster, wood and stucco.This hole saw for plaster for any recessed light installation job.
  • Satisfactory Service: If our HLOFIZI Carbide Grit Holes Saw you received is defective or unsatisfactory. We sincerely apologize and will definitely send you the new ones in no time. We appreciate all your remarks and comments. They are the key tools to develop and improve our handmade and heartcrafted products.
Check Stock

2000 Pcs #8 x 1 K Lath Mod Truss Sharp Point 305 SS ACQ Rated Low Profile Deck Screw - U-Turn

  • #8 x 1" K Lath Mod Truss Sharp Point 305 SS ACQ Rated Low Profile Deck Screw.
  • A steel fastener with an extra wide head, twinfast thread, and a piercing point. Common Usage is to attach lath to wood studs or light gauge metal..
  • 305 STAINLESS STEEL - A Nickel-Chromium grade of stainless steel that is used outdoors for high corrosive applications. ACQ Compatible.
  • Head Diameter: .404" - .441" | Head Height: .070" - .083".
Check Stock

Simple Designs LT2004-BWN Texturized Curvy Ceramic Table Lamp, Brown

  • Perfect for living room, bedroom, or office.
  • Uses 1 x 60W Type A Medium Base Bulb (not included).
  • A charming and practical table lamp to meet your fashion lighting needs. This lamp features a texturized stucco ceramic base and matching fabric shade. Perfect for living room, bedroom, or office..
  • Uses 1 x 60W Medium Base Bulb (not included).
Check Stock

Simple Designs LT2004-BLK Textured Stucco Curvy Ceramic Table Lamp, Black

  • Matching fabric shade. Recommended Light Bulb Shape Code-A19. Light Bulb Base Code-E26.
  • Perfect for living room, bedroom, or office.
  • Uses 1 x 60W Type A Medium Base Bulb (not included).
  • A charming and practical table lamp to meet your fashion lighting needs. This lamp features a texturized stucco ceramic base and matching fabric shade. Perfect for living room, bedroom, or office..
  • Uses 1 x 60W Medium Base Bulb (not included).
Check Stock

Joywayus Wall Mortar Sprayer Gun Stucco Shovel Hopper Cement Spray Gun 4 Jet Plaster and Stucco Sprayer for Painting Wall or Ceilings

  • Four spraying holes,need to use with an air compressor..
  • Useful stucco spray hopper gun used for plastering a stucco house..
  • For spray plaster, stucco, shotcrete, papercrete, GFRC, earthen mixes and more..
  • Cooperate with air compressor or air pump,a cement sand blasting gun instead of 10 workers!.
  • Handle made of Zinc alloy material,no cracking,simple operation,saving time and effort..
Check Stock

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Scotch Stucco Tape 1.88 inches by 60 yards 3260 1 roll

  • For use in traditional three-coat, hard-coat, one-coat stucco or EIFS processes.
Check Stock

Royal Pacific 8912DC Doorbell Chime Kit, Transformer, Chime, Lighted Button, 24V

  • Includes: 1 Chime, 1 Transformer, 1 Lighted Stucco Button.
Check Stock