Reviews Header Adapter Flange Kit

A-Team Performance - Hex Flange Bolts LS Exhaust Flange Manifold Header Zinc Plated - Compatible with GM Chevrolet Chevy LS1 LS3 LS2 LSX LT Engines 551696 Bolt Kit Only Silver

  • Hex Flange Bolts LS Exhaust Flange Manifold Header Zinc Plated.
  • Compatible with GM Chevrolet Chevy LS1 LS3 LS2 LSX LT Engines 551696 Bolt Kit Only Silver.
  • GM LS / LT Engines (Gen III, IV, V). USA Grade 10.9 with LS Exhaust Manifold Bolts.
  • Zinc-Plated and 350 Header Gasket Set with Bolts.
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Custom Header Exhaust Kit Generator Fits HONDA GX390 GO KART MiniBike Drift Trike

  • Custom header exhaust kit for use on Honda GX390 engines. Great start for those that want to construct their own exhaust system for generators, go karts, mini bikes. Kit includes mandrel bent 90 degree 1 1/4" tube with 3.5" radius, cnc cut 1/4" thick flange, and stainless steel replacement mounting hardware..
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Engine Elbow Adapter,90?? Elbow Adapter Exhaust Connection V?Band Clamp Stainless Steel 2.5in ID to 3.2in OD

  • Brilliant Compatibility:Engine Elbow Pipe For 2.5in/6.35cm ID 3.2in/8.13cm OD V-Band Flange.Manufactured according to the original specifications, which are very compatible with your model..
  • Good Replacement:90?? Flange Elbow Adapter Extremely good replacement on the market, can directly replace your old, broken flange elbow adapter.2.5in ID 3.2in OD V?band flanges on both sides, 90 degrees, with 2.5in pipeline..
  • Excellent Performance:Flange Elbow Adapter Connecting clamp have a good sealing function, if necessary, you can use welding process..
  • Easy to Install:90?? Elbow Adapter Easy to install, replace the old one directly, fix new one with a clamp, and weld if necessary.Practical and convenient in use.Such a practical tool you will need it..
  • Stainless Steel Material:Elbow Adapter Flange Clamp Precisely manufactured of high quality stainless steel material, durable, and long use life.Good quality not only can provide a safer guarantee for your life,but also good materials can increase product life..
Check Stock

Remflex (8053) OBX Exhaust Header Connector Gasket, (Set of 2)

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten the flange bolts.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 Inch.
Check Stock

Duttek USB 3.0 Motherboard Adapter，USB 3.0 Header to USB 3.0 Port Adapter, 20 Pin USB 3.0 Header Female to Dual USB 3.0 Female Splitter Motherboard Adapter for PC Motherboard Mainboard

  • USB 3.0 Motherboard adapter Compatible with USB 3.0 Super Speed 20 pin Motherboard Header..
  • 2 Ports USB 3.0 Header to USB 3.0 Port Adapter Color: Blue, Black.
  • Add extra USB 3.0 port to PC from 20 pin usb 3.0 header with this adapter..
  • USB internal splitter Adapter backwards compliant with USB 1.0 / 2.0..
  • USB header to USB port adapter is easy to use, driverless installation,USB 3.0 Splitter Adapter for Windows ME / 2000 / XP / Vista / 7 / 8 / 10 / Linux (any distribution)..
Check Stock