Reviews Laphard Drive Adapter Kit

Orion Motor Tech OMT Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

  • 1.ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle..
  • 2.PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
  • 3.UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (compatible with Ford, GM, Dodge, IHC and Jeep vehicles)..
Check Stock

Kobalt 573349 30-Piece 1/4 and 3/8-Inch Drive Mechanic s Tool Set with Hard Case Inch/Metric

  • 90-TOOTH RATCHET - 90-tooth ratcheting mechanism needs only a 4-degree swing arc, perfect for tight spaces.
  • 1/4-INCH SOCKETS - Kit includes 1/4", 9/32", 5/16", 11/32", 6mm, 7mm, 8mm, and 9mm 6-point 1/4-inch drive sockets.
  • 3/8-INCH DRIVE SOCKETS - Includes 1/2", 9/16", 5/8", 11/16", 3/4", 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, and 19mm 12-point 3/8-inch drive sockets.
  • DEEP SOCKETS - Set also features 3/8", 7/16", 10mm, 11mm, and 12mm 6-point 3/8-inch drive deep sockets, and 5/8" and 13/16" spark plug sockets.
  • EXTENSION AND ADAPTER - A 3-inch drive extension and a 3/8-inch drive to 1/4-inch drive adapter are included for additional versatility.
Check Stock

DURATECH Heavy Duty Ball Joint Press & DURATECH 7-Piece Pliers Set

  • DURATECH Heavy Duty Ball Joint Press Including - 3 x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Jackscrew, 1x Installing Cup Adapter, 1x Ball Joint Press, 1x Receiving Cup, 1x Installing Cup.
  • DURATECH 7-Piece Pliers Set Including - Oxford Rolling Pouch, 10-inch Groove Joint, 8-inch Groove Joint, 8-inch Long Needle Nose, 6-inch Long Needle Nose, 8-inch Linesman, 6-inch Slip Joint, 6-inch Diagonal are all included in this set.
  • DURATECH Heavy Duty Ball Joint Press - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter. The Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
  • DURATECH Heavy Duty Ball Joint Press - Made from heavy-duty forged steel technology, through the Charpy impact test, black oxide coated on the adapter with a robot hands helps improve oxidation and corrosion resistance, ensuring durability and long life. It is even ideal for professional mechanics.
  • DURATECH 7-Piece Pliers Set - Professional forged Cr-Ni Steel & high quai....
Check Stock

SSD Mounting Bracket, SNANSHI 2.5 to 3.5 Hard Drive Adapter SSD HDD Metal Mounting Bracket Adapter Hard Drive Holder for PC SSD (Pack of 2)

  • 2.5 to 3.5 Adapter: Hard drive mounting kit supports installing a 2. 5” hard Drive into a 3. 5” internal Hard Drive slot. The mounting fit all 2. 5” SSDs and HDDs.
  • Quality Selection: SSD adapter 2.5 to 3.5 made of durable metal alloy, can help heat dissipation and would not easily get out of shape, protecting your hard disk effectively.
  • Easy installation: ssd bracket 2.5 to 3.5 a complete set of tools needed for installation ( screws) is packaged. You can easily utilize unused hard drives to extend capacity of your computer by following simple steps.
  • SSD Bracket:Fits in any form factor desktop computer case with at least one standard 3.5" internal drive bay.
  • Package Included: 2Pack 3.5 to 2.5 adapter, 16 x Mounting Screws.
Check Stock

DURATECH Heavy Duty Ball Joint Press & DURATECH 8-Piece Pliers Set

  • DURATECH Heavy Duty Ball Joint Press Including - 3 x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Jackscrew, 1x Installing Cup Adapter, 1x Ball Joint Press, 1x Receiving Cup, 1x Installing Cup.
  • DURATECH 8-Piece Pliers Set Including - Oxford Rolling Pouch, 3-piece Groove Joint (12-Inch, 10-Inch, 8-Inch), 8-inch Adjustable Wrench, 8-inch Linesman, 6-inch Long Nose, 6-inch Slip Joint, 6-inch Diagonal are all included in this set.
  • DURATECH Heavy Duty Ball Joint Press - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter. The Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
  • DURATECH Heavy Duty Ball Joint Press - Made from heavy-duty forged steel technology, through the Charpy impact test, black oxide coated on the adapter with a robot hands helps improve oxidation and corrosion resistance, ensuring durability and long life. It is even ideal for professional mechanics.
  • DURATECH 8-Piece Pliers Set - Professional forged Cr-V Steel & Cr-Ni Stee....
Check Stock

2.5 to 3.5 Adapter, Inateck SSD Mounting Bracket with SATA Cables and SATA Power Cable, ST1004

  • 2.5 to 3.5 adapter: The hard drive mounting kit supports installation of one single 2. 5 hard Drive as well as two 2. 5 hard drives to a 3. 5" Internal Drive bay..
  • Convenient design: Dual form facilitates operation. Side wings are detachable, which can be detached when only one hard drive is mounted..
  • Complete kit: mounting tools are included. Two SATA III data cables are offered and both support a bandwidth of 6Gbps, backward compatible with SATA I/II. 2 power cables are also provided for power supply..
  • Side and bottom installation: supports installation from side or bottom. Screw holes are placed at the bottom of the bracket to better support hard drives..
  • Package Content: 1 x Mounting kit, 1 x screw driver, 16 x Screws, 1x 4 pin to Dual 15 pin SATA power cable, 1x 15 pin to Dual 15 pin SATA power cable, 2x SATA data cables, 1 x User Manual..
Check Stock

ASC Audio BlueTooth A2DP + USB Flash Drive Car Stereo Adapter Interface Compatible for Honda w/Navigation- Some Vehicles only- Compatible Vehicles Listed Below

  • BlueTooth Phone and Music Streaming Kit w/USB Flash Drive Audio Input BlueTooth hands free car kit..
  • Add Bluetooth Conversation and Music Streaming to the factory radio.
  • USB connection input for USB flash drive use.
  • BlueTooth only works when the radio is in the adapter's mode. Not compatible with factory XM/satellite radio- will have to be disabled. USB port is....
  • This adapter works on the following vehicles: Made for: TL 2004-2012, MDX 2005-2012, TSX 2004-2012 (except Type S), RL 2005-2012.
Check Stock

Orion Motor Tech 21PCS Master Ball Joint Press | Upper and Lower Ball Joint Removal Tool | Automotive Mechanic Tool Set

  • ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH 22PCS Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with multi-size adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle..
  • UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with all the receiver tubes and removing/installing adapters needed to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most GM, Chevy, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles, will service perfect for vehicles having the Dana 28, 30, 35, 44, 60 axle.
  • PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged solid carbon steel with anti-rust black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
  • CONVENIENTLY ORGANIZED IN CUSTOM MOLD....
Check Stock

Gimbal Bearing Alignment and Install Kit, Heavy Duty Engine Alignment Tool Set Fits for Mercruiser Alpha Bravo Volvo OMC

  • 【Superior Material】Made from quality steel with black coating, corrosion and rust resistance, sturdy and durable..
  • 【High Performance】Used to align drive shaft receiver to gimbal bearing. Also used to install drive shaft seal and gimbal bearing with included bearing install adapter..
  • 【Application】Align and install gimbal bearing and seal kit works for Mercruiser Alpha 1 Alpha MR Bravo OMC Cobra Volvo..
  • 【Easy & Convenient to Use】Our bearing install adapter doesn't require drilling hole. Can be install directly..
  • 【Benefits】Proper installation can prevent wear on the bearing, drive and coupler..
Check Stock

DURATECH Heavy Duty Ball Joint Press & U Joint Removal Installer Tool Kit with 4X4 Adapters, for Most 2WD and 4WD Cars and Light Trucks Car, Storage Case Included

  • 【Wide Application】 Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter. The Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
  • 【Easy To Use】 It will help you easily remove the press fit parts of the ball joint without removing the control arm from the vehicle, a real saver of effort and time in your everyday life..
  • 【High-quality Materials】 Made from heavy-duty forged steel technology, through the Charpy impact test, black oxide coated on the adapter with a robot hands helps improve oxidation and corrosion resistance, ensuring durability and long life. It is even ideal for professional mechanics.
  • 【Package List】3 x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Jackscrew, 1x Installing Cup Adapter, 1x Ball Joint Press, 1x Receiving Cup, 1x Installing Cup.
Check Stock