Reviews Degree Angle Measurement Tool

Digital Angle Finder, farway 2 in 1 Digital Protractor, 7Inch / 200mm Stainless Steel Digital Angle Ruler with LCD Display for Woodworking/Carpenter/Construction Tool (Battery Included)

  • ...and a protractor makes it easy to measure internal and external angles. Great gift for dads, men and women who work in woodworking, construction, engineering..
  • 【Stainless Steel Digital Protractor】The stainless steel material is hard and durable, which can prolong the service time of this protractor. Laser etched measurements offer clear reading and years' usage..
  • 【High Accuracy & 360° Measurement Measure Angles Tool】Accuracy of this digital angle gauge is ±0.3 degree. The ruler supports measurement between metric(mm) and imperial(inch), makes it can measure length (0~200 mm/0~7 inch) convenient and accurately.Hinge mechanism on the angle rule allows a full range of 0 to 360-degrees to measure inside outside and reverse angles..
  • 【Angle Finder with LCD Display & Locking Function】Angle Finder Protractor comes with a large easy-to-read LCD display. For read it easily, this woodworking tool could be locked at any angle,and has zeroing button to reset angle finder tool at any time. It also comes with a Reverse Function Button, When you measuring large angle and doing reverse measurement,the display could read up-side-down.The function of automatic shut-off after 6 min saves energy of the battery..
  • 【Easy Operation & Wide Application Angle Protra....
Check Stock

PREXISO Angle Gauge Magnetic, Angle Finder - Digital Level Electronic, Protractor Angle Cube Inclinometer for Woodworking, Table Saw, Construction, Masonry, Machinery, 0-360° Bright Backlit Display

  • 2 Measurement Modes & 4 Units – Turn on the equipment to directly enter the ABSOLUTE measurement mode, and press the ZERO button to switch to the RELATIVE measurement mode.
  • This equipment fast measurement displays angles in degrees, %, mm/m and IN/FT.
  • Magnetic V Groove Base & Auto Reversible Display – The pocket angle finder features sturdy V groove edges, a strong magnetic base.
  • When upside down, the LCD display with backlight auto rotates, ensure fast and clear reading.
  • TIPS: If the angle gauge is used in an incorrect position (tilts diagonally over 30 degree), screen display ERROR to remind users to use correctly.
  • Accurate Angle – This angle finder tool measures, sets angles, and if a surface is level.
  • PREXISO angle gauge has higher resolution of 0.05°and higher accuracy of ±0.1°at 0°and 90 °, and ±0.2°at other angles.
  • The measuring range is 0 to 360° (4×90°), buzzer will alert when it’s within ± 1° to the horizontal or vertical position.
  • Compact Design & Calibration Function – Mini angle gauge fits in your pocket or the storage bag that comes included to protect the equipment surface from wear.
  • The equipment has been calibrated in the factory. In order to ensure lasting accuracy, the equipment also has calibration function, so ....
Check Stock

XCSOURCE Right Angle 90 degree Vertical Horizontal Laser Line Projection Square Level Laser Square

  • Laser Level Square is an easy to use leveling tool..
  • Projects horizontal and vertical laser "chalk lines" on surfaces..
  • Dual diodes for making 90 degree laser beams on any surfaces..
  • Two suction cups allow the laser level square to be mounted onto the surfaces alignment guide for 90-degree layout-calculate and turning angles in 5-degree increments..
  • Kindly noted: the angle of the laser line can be changed according to the angle scale, saving your time of measurement and marking..
Check Stock

Aluminum Alloy Woodworking Square Size Measure Ruler, welltop 3D Mitre Angle Measuring Tool, Multifunctional 45/90 Degree Angle T Ruler Gauge, for Three Dimensional Items Measuring Timber, Pipes

  • ...0° angle, ten common angles to meet your different needs..
  • 【Tough & Durable Material】The 3D mitre angle measuring tool is made of high quality aluminum alloy material, high hardness, high toughness, non-toxic, rust-proof, durable and non-deformable, high-precision measurement and long life span. Compared with other plastic rulers, which is more durable and has higher accuracy..
  • 【High Measurement Accuracy】Superb carftsmanship, square marking gauge, fine polishing surface, comfortable in your hand, and easy to use. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree or 90 degree angles. The measurement accuracy is 1mm. It can help you to improve working efficiency and save time with woodworking projects..
  • 【Clear Scale】The multi-functional angle ruler with clear engraving metric scales, is easy to read and elegant in appearance. Compared with other plastic rulers, it is more accurate. The maximum measuring range is 155mm. Suitables for household woodworking DIY, very convenient to use and carry..
Check Stock

eBoot 4 Pieces Math Geometry Tool Plastic Clear Ruler Sets, Protractor, Triangle

  • 4 Pieces math set: 4 in 1 geometry tool contains a 6 inch/ 15 cm straight ruler, a 4 inch protractor, 2 x triangle ruler (45 and 60 degree).
  • 2 Sides measurement ruler: transparent ruler and through it you can read conveniently.
  • straight and triangle rulers with inch and metric scales on them.
  • Portable and durable: geometry tools are constructed of plastic material, lightweight, easy and handy to be put into your school bags or in your desk.
  • Easy to measure angle: 4 inch/ 10 cm 180 degree protractor, 45 and 60 degree set rulers make it convenient to get the angles' degrees.
  • Wide application: math geometry tool set are useful tools for architects, engineers, artists, designers, students, teacher and so on.
Check Stock

ChgImposs Imperial Screw Pitch Gauge, 55 Degree Cutting Gauge Tool Stainless Steel Thread Gauge with 4-48 Blades Range

  • It is 55 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Measuring Range: 4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12, 14, 16, 18, 19, 20, 22, 24, 28, 40, 48.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • All 20pcs blades was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking, Metalworking, Construction

  • High Accuracy：This digital angle finder allows a full range 0-360°to measure internal angle，external angle & Contra angle Measuring precision is ±0.5°, resolution is 0.05° .You can switch between degrees and minutes to Improve the measurement accuracy , meet your requirements for different accuracy..
  • Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
  • Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
  • LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
  • Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t....
Check Stock

Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking Metalworking Construction

  • High Accuracy：This digital angle finder allows a full range 0-360°to measure internal angle，external angle & Contra angle Measuring precision is ±0.5°, resolution is 0.05° .You can switch between degrees and minutes to Improve the measurement accuracy , meet your requirements for different accuracy..
  • Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
  • Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
  • LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
  • Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t hesitat....
Check Stock

Digital Angle Finder Protractor,2 in 1 Auzof Angle Finder Ruler,7Inch / 200mm Stainless Steel Angle Measuring Tool with LCD Display for Woodworking/Carpenter(2 Batteries Included)

  • 【2 in 1 Digital Angle Finder】：Auzof protractor has the function of a 200mm/7.874in Stainless Steel ruler and a protracting tool. The combination of a millimeter and inch scale ruler and a protractor makes it easy to measure internal/external angles and fast measurements Length . Suitable for woodworking, construction, drafting and other fields..
  • 【High durability and precision】:This digital protractor is made of corrosion-resistant stainless steel straightedge, laser scale straightedge measurement error 1mm, Measuring Range: 0-360°.
  • 【Lock, Zero, Hold and Degree conversion Functions】This protractor can be locked at any angle by rotating the Locking Knob and pressing the HOLD function button will hold the reading.Long press on the "Rev" button, the display can be converted ° and ′. Zero button can reset the angle measuring tool at any time..
  • 【Large LCD Display &2 Batteries Included 】 Auzof digital protractor is equipped with a large LCD display for easy reading Resolution 0.1° Clear readings even in low light conditions,Also It comes with a CR2032 button battery inside, you can use it directly when you receive it. We also give you a additional battery as a spare..
Check Stock

Multi Angle Tool Six-Sided Universal Ruler Tile Holes Measure Ruler with 5-Holes Positioning Apertures Aluminum Alloy Full Metal Drill Guide Locator Upgraded for Craftsmen,Father s Day Gift

  • DURABLE AND ERGONOMIC: Made of 5mm aluminum alloy with durable metal knobs and bolts, It`s more durable and quality than plastic one.Say goodbye to....
  • MULTIPLE APPLICATIONS: Set at 90-degree angles to space parallel pieces of wood, form into a T-Square to align your brick, even set your own distances....
  • EASY TO USE: Just place the template tool ruler onto your work area, slide the rulers into the shape needed, and tighten the screws.The innovative,....
  • ACCURATE ANGLE MEASUREMENT TOOL: This Six-Sided Aluminum Alloy Angle Template Tool is Laser engraved markings(inches & centimeters) perfect for....
  • PORTABLE & EASY to STORE -- The angle ruler is lightweight designed for handy use and can be folded for easy storage. A must having tool in your box!.
Check Stock