Reviews Bevel Angle Measurement Tool

General Tools 29 Plastic Protractor and Angle Finder, Outside, Inside, Sloped Angles, 0° to 180° , Yellow

  • The digital level is more precise and often easier to use than old-school models with bubble vials.2.2” digital level's versatility and accuracy make it a must-have tool..
  • Strong Stable Magnetized Base---The bevel gauge with V-Groove strong magnetized base allowing you attach the cube directly to any ferrous metal surface, even a curved surface..
  • Easy to Read---Digital level has upgraded LCD screen, the measured values displayed are clearer and brighter, even in the dark does not affect reading..
  • Two Measurement Modes---Absolute angle mode and relative measurement mode, press the "ZERO" button to achieve relative/absolute measurement interchange at any position, could not be easier.This sturdy mini tool also functions as an inclinometer, protractor, and a level and bevel gauge..
  • Portable & Lightweight---eOUTIL digital inclinometer has portable size, it's convenient to carry and co-work with other measuring tools and enlarge measuring range. It is compact and very much affordable..
Check Stock

Bnlcd Miter Saw Protractor, 7.3-Inch Aluminum Protractor Angle Finder Featuring Precision Laser Engraved Scales, Woodworking Angle Measuring Tool with 360 Degree Rotation Function

  • 【MITER CUT & SINGLE CUT】This professional miter protractor has two scales to measure angles. One for a single cut which use the ourside scale, where only one piece of material is cut, and another one which use the inner scale, when two pieces of material need to be lined up/match.
  • 【CUTTING GUIDE TOOL】Doing angle measuring first, then set the angle on your miter saw or table saw without conversion required, smarter and friendly for baseboard trimming work.
  • 【LENGTH MEASUREMENT】INCH/CM 2 type of scales for length measurement suitable for different scenarios.
  • 【MITER ANGLE FINDER】It's also equip with high precision level gauge design for simple tasks of level measuring, And measuring arm can 360° rotate freely without any dead angles.
  • 【DURABLE CORNER ANGLE FINDER TOOL】D DUSSAL bevel protractor is made from high-quality ABS plastic and it's resistant to scratch and very durable without worrying about rust and deformation, well installed keep it will not loose and shake durring.
Check Stock

Angle Gauge eOUTIL Digital Protractor Inclinometer Angle Finder Magnetic Base - Precision Level Box for Automobile Woodworking Building Drilling Machinery Masonry Yellow

  • Audio Indicator---This digital angle gauge and level have switchable acoustic signal function. Acoustic signal routing via beeps when you reached 0°....
  • Ultra-HD LCD Display & Inverted Measurements---This digital level sports a high visibility bright screen with large digits. High Visibility LCD....
  • HOLD & ZERO Function---Using the HOLD function, readings can be “frozen” on the display and the ZERO function makes it possible to apply zero....
  • Strong Stable Magnetized Base---The bevel gauge with V-Groove strong magnetized base. You can easily mount this tool against the metallic surfaces,....
  • 4 Unit of Measurement---The electronic inclinometer also offers bevel and angle readings in pitch inch/feet, degrees, millimeter/meter, and percent....
Check Stock

General Tools Angle Protractor #17 Stainless Steel Square Head - Measuring Tool for Carpenters & Woodworking Hobbyists

  • PROTRACTOR ARM: It's constructed of durable stainless steel and features a 6" adjustable arm for setting the bevel, transferring angles, and finding your measurement. It's an essential tool and gift idea for a fellow carpenter, student, or machinist..
  • CONSTRUCTION PROTRACTORS: This square head protractor has a 0 to 180-degree semi-circle scale in forward and reverses directions to measure all angles on the job. The 3-3/8" x 2" head helps anchor the protractor against objects to hold it in place..
  • ANGLE FINDER: Quickly and easily identify your angles with our rust-resistant measuring compass. The metal arm locks into place with a knurled thumb nut, allowing you to gauge the measurement of the inclination accurately..
  • MEASUREMENT TOOLS: The project possibilities are endless when using our high-quality square-head protractor tool. You can master the art of building new cabinets, tables, chairs, wooden desks, framing, and various furniture makings..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

Metabo HPT MultiVolt 36V Sliding Miter Saw 10-Inch Blade Dual Bevel Includes Battery & Charger C3610DRAQA

  • MULTIVOLT: Miter saw can be powered by a MultiVolt 36 Volt battery (included) or the MultiVolt AC adapter(sold separately).
  • FEATURING: Dual bevel sliding miter saw providing the power and precision a pro demands.
  • INCLUDES: 36 volt miter saw, 4 AH battery and charger.
  • AWARD: Rated Best 10-Inch Miter Saw by Pro Tool Reviews 2020.
  • MITER AND BEVEL: Miter and bevel: 0-60 degree miter angle to the right and 0-55 degree miter angle to the left and also 0-48 degree bevel angle range....
Check Stock

eOUTIL Digital Level Angle Finder Waterproof IP65 Protractor Angle Gauge Inclinometer with V-Groove Magnetic Base/0~360 Degree

  • V-groove Magnetic Base: This magnetic V-groove base of digital angle gauge can be firmly attach to ferrous metal surfaces like pipe, steel construction framing, metal fabrication. Rugged durable aluminum frame for precision leveling measurement.
  • Absolute & Relative Measurement: This digital protractor has absolute angle measurement to test whether the working surface is on the level to check roof slopes, wheel alignment, etc. Moreover, this magnetic level lets you check the relative angles between the surfaces.
  • High Accuracy: Accurate to the ±0.1° at 0° and 90°.
  • ±0.2° at other angles. Displays angle and bevel readings in degrees, pitch IN/FT, mm/M, and percent slope. With reading hold function, it is convenient to record by this level digital inclinometer bevel box. Moreover, you can have an accurate measurement of the angles between two measured surfaces.
  • Backlight LCD Display With Audio Indicator: Featuring a large, bright LCD display you can easily read the measurements whatever the light conditions. The display value reverses automatically when the electronic level is upside down. Acoustic signal routing via beeps when you reached 0° or 90°.
  • IP65 Waterproof And Dust-proof Level: It has IP65 protection which makes it suitable for use in harsh ....
Check Stock

Huepar Digital Angle Gauge Protractor, Electronic Bubble Angle Finder Dual Axis Level Box 0.01° Resolution V-Groove Magnetic Base&LCD Inclinometer Bevel Gauge with Audible Alert -Measures 0~360° AG03

  • ...rful magnetic V-groove bases at top and the bottom, this digital bevel gauge can be easily and firmly attached to miter saw, band saw, table saw blades, metal poles and even round pipes. You can also use it on fences, tables, and other metal surfaces. Self-inverting display allows for easy slope readings when angle measurement tool is upside down..
  • ✔️HOLD & ZERO FUNCTION: The current measurement value can be held on the display by short pressing the HOLD switch. The zero function enables users to set relative zero angle at any reference surface. This digital angle inclinometer provides convenience for Carpentry woodworking, construction, machinery, telecommunications, automobile etc..
  • ✔️PORTABLE & PACKAGE CONTENTS: In compact pocket size, this angle finder can fit into tight spots to get perfect measurements needed. With handy design and a portable pouch, this sturdy precision tool can be taken to anywhere. Users can install the battery easily with the included screwdriver. The package contents include 2 x AAA batteries, a screwdriver, a portable pouch with belt loop, user manual..
Check Stock

BLACK+DECKER Jig Saw, 6.0-Amp (JS670V)

  • VERSATILE APPLICATION – Electric jig saw makes straight and curved cuts on wood, metal, and plastic..
  • LINEFINDER – Illuminates your cut line for enhanced visibility and precision..
  • SMART SELECT TECHNOLOGY – Turn the dial to the correct task to automatically select the optimal orbital setting..
  • ACCU-BEVEL ANGLE ADJUSTMENT – Quick-action lever and indicator window allow you to accurately set the base plate for beveled cuts up to 45 degrees..
  • VARIABLE-SPEED TRIGGER – Generates up to 3,000 spm of cutting power..
  • TOOL-FREE BLADE CHANGING – Quickly swap out the blade without extra tools..
  • ON-BOARD BLADE STORAGE – Keep loose blades ready for use..
  • CORDED – Corded design offers unlimited runtime for even the biggest jobs..
  • INCLUDES – JS670V jig saw, (1) wood cutting blade, (1) pen, (1) pen holder, (3) AAA batteries..
  • LineFinder illuminates your cut line for greater visibility and accuracy.
  • Set the dial to your task and SmartSelect automatically sets optimal orbital setting.
  • Onboard blade storage for quick access to blades.
  • Accu-Bevel Angle Adjustment provides accurate bevel adjustment with quick action lever and indicator window.
Check Stock

TREND DLB Digital Magnetic Electronic Level and Angle Finder for Woodworking with Table or Miter Saw, Black

  • MULTITUDE OF APPLICATIONS: This digital magnetic angle finder is ideal for measuring angles.
  • MORE THAN A LEVEL: Icons on the LCD show information relevant to the mode the level is in, including simple arrow indicators to show which way the work needs to be raised or lowered to achieve a level surface.
  • INVERTED USE: Display automatically rotates to read the correct way up, helping to eliminate errors when reading and logging any measurements.
  • ANGLE MEASUREMENT: Placed on a surface such as a saw table, it can be zeroed and repositioned on the blade using the magnetic base to secure it, ideal for checking and altering to a specific angle for bevel cuts from a table surface.
  • ANGLE MATCH: Alternatively, when positioned on a bandsaw blade and zeroed, it can then be placed on the table and the table tilted for accurate bevel cutting.
Check Stock

Metabo HPT Sliding Compound Miter Saw | 12-Inch Blade | Double Bevel | Laser Marker | 15-Amp Motor | 5 Year Warranty | C12RSH2S

  • AWARD: Rated Best Miter Saw for the Money for Pros by Pro Tool Reviews 2022.
  • MOTOR: Powerful 15 Amp motor to tackle tough cutting jobs with ease.
  • LASER: Laser marker system from Metabo HPT increases cutting accuracy.
  • FENCE: Large sliding fence raises fence height to 5.125 In. to cut up to 7.5 In. crown molding vertically.
  • MITER: 0-57 degree miter angle to the right and 0-45 degree to the left for flexibility.
  • BEVEL: 0-45 degree bevel angle range to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place.
  • SCALES: Positive stops and indications on the miter and bevel scale, for easy to read measurements and quick settings.
  • HANDLE: Vertical handle with soft, vibration reducing elastomer grip adds comfort and control.
  • SLIDE: Compact slide system allows the saw head to slide along fixed rails, for zero clearance.
  • WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty.
Check Stock