Reviews Angle Measurement Device Tool

Laser Measure, Green Beam Laser Measuring Device with Angle Sensor, 196Ft M/In/Ft Laser Distance Measure Backlit LCD Laser Distance Meter for Pythagorean, Distance, Area and Volume Measuring

  • [BRIGHTEN GREEN BEAM] When using a traditional red beam laser measuring tape, the biggest pain point is that it is not easy to see the emitted laser light during long distance measurement. So we upgraded the red laser beam to a green laser beam. We were surprised to find that the laser brightness of the laser tape measure had increased by three times. Within the range of the laser measuring tool. Even in a bright work environment. You can also see where the laser light is at a glance..
  • [MULTIPLE MEASUREMENT MODES] This is not just a laser distance measuring tool that can measure distance. Area, volume, and Pythagorean measurement are the most basic functions. Due to the introduction of the angle sensor, this laser distance measure tool can perform more diverse measurement modes, for example, you can measure the distance from the window to the ground with one click. Or use this laser measure tool to measure the height of the second floor window without close contact..
  • [PRACTICAL FUNCTION] This laser measure can perform most measurements in 0.5 seconds. The backlit screen can be used at night. The mute function is used in quiet environments such as libraries. Data addition and subtraction calculations and 20 sets of data storage free hands from pen ....
Check Stock

Devil s Protractor [Explicit]

  • Precise angle and/or slope measurement with angle meter, bubble level, laser level with Accelerometer or Rotation Vector Sensor. (Check sensor....
  • Option to measure angle or slope on surfaces not parallel to ground with relative angle measurement mode..
  • 2 orientation axis for measurement.(Move your device left/right or back/forward direction to measure angle).
  • Option to measure difference between 2 separate measurements with difference measurement mode..
  • Option to measure angles using very accurate Rotation Vector Sensor, or Accelerometer..
Check Stock

AmazonCommercial Laser 100m Distance Meter, Fast Measurement, Ability for Outdoor Measurement

  • Handheld digital distance measurement laser for indoor or outdoor use.
  • Compact size fits easily into a pocket or on a tool belt.
  • Includes continuous max/min distance tracking and history measurement recording.
  • Laser Class II device. Maximum measured radiant power at 1 meter distance was 0.95mW.
  • Included components: two 1.5V AA batteries, carrying case, user manual.
Check Stock

ChgImposs Imperial Screw Pitch Gauge, 55 Degree Cutting Gauge Tool Stainless Steel Thread Gauge with 4-48 Blades Range

  • It is 55 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Measuring Range: 4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12, 14, 16, 18, 19, 20, 22, 24, 28, 40, 48.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • All 20pcs blades was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

Quicksilver 802878Q54 Enamel Spray Paint Leveler

  • 【Easy to Use Construction Tool】RONGPRO laser level for picture hanging with one button operation makes it easy to select Horizontal or Vertical line for indoor or outdoor use. One button controls the laser lines, you could get any angles of the measurement target. Ideal for tile alignment, wall studding, windows, doors, etc..
  • 【Self Leveling Feature】If you are struggling to make laser beam level when you use it,which would waste your much time.This level laser tool could self leveling when located on an inclined surface within 4 °. If the surface inclines over 4 °, the laser will flash to indicate out-of-level condition to remind you to adjust the location of laser leveler tool, which is very easy to use and save your much precious time..
  • 【Multifunction Operation Modes】3 laser level line has two switching models:lock and unlock.Each of them has three measurement modes: vertical laser ,horizontal laser line,cross laser line.Switchable horizontal and vertical red beam laser tool could lock the vertical,horizontal and angle position of the measurement target quickly..
  • 【Green Level Laser With Visibility and High Precision】RONGPRO green laser level takes upgraded chip tech to deliver maximum line laser visibility up to 50ft with 2 times....
Check Stock

ChgImposs Imper Screw Thread Pitch Gauge, 55 Degree Cutting Gauge Tool with Blades Range 4-62G

  • It is 55 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Measuring Range: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • It was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

Bosch Bluetooth Enabled 330-Foot Lithium-Ion Laser Distance and Angle Measurer GLM 100 C

  • UPGRADES: Features Bluetooth functionality to conveniently transfer and store measurements from the laser measurer to a smart device via free app. Also includes backlit display with tilt-screen technology for easy viewing in all directions..
  • PRECISION: The laser tool’s Precision Measuring Technology with extreme accuracy measures distances up to 330-feet to within 1/16-inch..
  • ACCURACY: The Bosch GLM 100 C features a built-In tilt sensor to displays 360-degree angle measurements in two axis allowing for more accurate measurements..
  • LEVEL: Option to add the R 60 digital level attachment to transform the GLM 100 C into a 24-Inch digital laser level (not included)..
  • VERSATILE: Offers ten measurement modes including length, area, volume, angle, min/max, continuous, single indirect height, single indirect length, combined indirect height, and multi-surface are measurement for maximum versatility..
  • Class IIa laser product, ≤1mW power output.
Check Stock

ChgImposs Metric Screw Pitch Gauge，60 Degree Cutting Gauge Tool Stainless Steel Thread Gauge with 0.25-6.0 Blades Range

  • It is 60 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Measuring Range: 0.25, 0.3, 0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • All 24pcs blades was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

Generic Aluminum Alloy Multi Angle Ruler Drill Guide Template Tool Ceramic Tile Hole Punch Locator Folding Ruler for DIY Carpenters Tilers Measuring, 9 fold, single section 17.5x2.5cm

  • ... the shape you want. Measuring objects of different shapes is fast and easy..
  • Time saving: Use a sliding ruler to quickly measure the angle and size, lock it, and then stick the ruler on the material you need to cut, quickly draw the size and cut, save your time and improve your work and productivity..
  • Accurate angle measurement tool: This angle tool is etched marks (inches and centimeters), which is very suitable for angle measurement. You can adjust the size to accurately mark the tiles. The metal protractor is a measurement and integrated hole positioning tool..
  • High-quality materials: This multi-angle measuring ruler is made of high-quality aluminum alloy, which will not break due to bending or rust, and is more durable and stronger than plastic..
Check Stock

Generic Aluminum Alloy Multi Angle Ruler Drill Guide Template Tool Ceramic Tile Hole Punch Locator Folding Ruler for DIY Carpenters Tilers Measuring, 16 fold, single section 17.5x2.5cm

  • ... the shape you want. Measuring objects of different shapes is fast and easy..
  • Time saving: Use a sliding ruler to quickly measure the angle and size, lock it, and then stick the ruler on the material you need to cut, quickly draw the size and cut, save your time and improve your work and productivity..
  • Accurate angle measurement tool: This angle tool is etched marks (inches and centimeters), which is very suitable for angle measurement. You can adjust the size to accurately mark the tiles. The metal protractor is a measurement and integrated hole positioning tool..
  • High-quality materials: This multi-angle measuring ruler is made of high-quality aluminum alloy, which will not break due to bending or rust, and is more durable and stronger than plastic..
Check Stock