Reviews Centrifugal Impeller

Armstrong 174031-013 1/12 Horsepower S-25 BF In Line Circulator Pump

  • Flange sizes (NPT): 3/4, 1, 1-1/4, 1-1/2.
Check Stock

200W 24V DC Submersible Solar Water Pump Portable Deep Well Pump Noiseless max Flow 16L/min Water Pump Lift 60m for Ship Boat Fish Ponds agricultural irrigation

  • 【Main Parameter】Power: 200W, Voltage: 24V DC, Max flow: 16L/min , Max lift:40m, Outlet: 0.98'' (25mm), Pump diameter:77mm, Pump length:340mm..
  • 【Premium Pump】Made of cast steel material, corrosion resistance, heat resistance, high temperature. Pure copper motor, cast steel chassis, safety insulation, strong power, DC diving, good mute effect..
  • 【Cast Steel Impeller】Centrifugal impeller, more powerful, fast speed, effectively increase the head flow. It uses car power, energy saving and environmental protection..
  • 【Environmental protection】This is a non-toxic, non-polluting, noiseless solar water pump. The pump has a built-in controller and is easy to install. It can connect the pump directly to the solar panel..
  • 【Wide Application】Suitable for using in ships, fishing boats, fish ponds, agricultural irrigation and etc.High lift, large flow, small size, eas.
Check Stock

VIVOSUN 6 Inch Inline Duct Fan, 440 CFM Ventilation Fan with Variable Speed Controller for Grow Tent, Indoor Garden Ventilation, Black

  • Energy-Efficient Ventilation: This powerful, heavy-duty blower with a fan speed of 2450 RPM creates an air flow of 440 CFM.
  • It combines the features and benefits of both axial and centrifugal fans to effectively circulate air into your target location, eliminating odors and achieving optimal ventilation.
  • Quiet Operation: The sturdy leather cover on the outside further dampens any sound or vibration.
  • Tight and precise construction eliminates rattling.
  • The centrifugal impeller provides powerful airflow and has a disproportionately low noise level of 50 decibels that won't impact your life or distract you while you're concentrating on your work.
  • Adjustable Speed: This centrifugal fan is equipped with a stepless speed controller on the power cord to enable the fan to run at different speeds.
  • You can adjust it to the desired airflow level according to your requirements.
  • Adjust it to a high speed when it is hot or humid in the grow tent, and it will instantly cool it down.
  • Easy to Install: This duct fan comes with a mounting bracket through which the fan can be lifted by rope hangers.
  • Quick installation and easy maintenance by simply removing the locking duct ends.
  • Enough length cord is designed for hassle-free setup.
  • The duct fan is compact and lightweight, ....
Check Stock

HydroMist CentraMist Centrifugal Misting Fan Tower-High, Tower Fan, Operates With or Without Misting, 5 Nozzle Ring, High-Pressure Pump Required, Off-White, 12”

  • Cooling Fan: HydroMist’s 12” Centrifugal Misting Fan is a patio cooling fan that blows air outwards for 360 degrees of cooling. The tower fan runs at a single speed, is very quiet, and is available in an off-white color.
  • Better Recirculation: The top and side grills surround the impeller blades. The shroud assists the focus of input air for better recirculation. The cooling fan circulates 2400 cu. ft. of air per minute and covers 400 sq. ft. area.
  • 360 Degrees of Cooling: The Centrifugal fan umbrellas the mist 360 Degrees from the center. The packaging includes 5 high-pressure and drip-free stainless steel misting nozzles.
  • High-Pressure Pump Not included: The fan operates with or without misting. A high-pressure 1000 PSI misting pump and 3/8 tubing are required for misting. Multiple fans can be used on one pump. ⅜ compression fitting included.
  • Application: The CentraMist fan is ideal for cooling your backyards and patios. You can also insert the pole through most outdoor umbrella tables for a much cooler dining experience.
Check Stock

Solar Fan

  • Durable: The fan has a strong motor which features a permanently lubricated bearing that operates quietly and requires no maintenance.
  • Compact But Efficient: This duct fan is compact and lightweight enough to be installed in areas with little available space.
  • With a diameter of 4 inches, speed of 2930 RPM and 100 CFM air flow.
  • Low Noise: Superior balanced centrifugal impeller for long service life & quiet operation.
  • A less than 30 dB noise level does not have any harm and will not disturb your work.
  • Wide Applications: You can have it in bathrooms, kitchens, workshops, basements, attics and etc, in order to boost airflow in HVAC systems.
  • Also, it can be used in grow rooms as intake fans or exhaust fan.
  • Specifications: Voltage 110/120V, Power 14W.
  • Max Operating Temp of Motor is 130℃ / 266℉.
  • Note: Please turn the fan off immediately if the blades get stuck by other objects.
Check Stock

Ace Hydraulic Driven Centrifugal Pump 2" Suction x 1.5" Discharge USA Made Farmer Bob's Parts FMC-200-HYD-304

  • Max flow: 200 gpm Max pressure: 120 psi Port sizes: 2" FNPT Suction, 1-1/2" FNPT Discharge Pump material: Cast Iron Hydraulic motor: Requires 11 gpm hydraulic flow on closed and open systems Seal material: Viton Carbon/Ceramic (Optional Severe Duty Silicon Carbide available) Impeller material: Chemical Resistant Valox (Optional Cast Iron).
Check Stock

Ace Hydraulic Driven Centrifugal Pump 1.5" Suction x 1.25" Discharge Farmer Bob's Parts FMC-150-HYD-206

  • Max flow: 135 GPM Max pressure: 120 PSI Port sizes: 1-1/2" FNPT Suction, 1-1/4" FNPT Discharge Pump material: Cast Iron Hydraulic motor: Requires 7 gpm hydraulic flow on closed and open systems Seal material: Viton Carbon/Ceramic (Optional Severe Duty Silicon Carbide available) Impeller material: Chemical Resistant Valox (Optional Cast Iron).
  • 014-FMC150HYD206, FMC 150 HYD 206, FMC150HYD206.
Check Stock

iPower GLFANXINLINE10V2 10 Inch 760 CFM Inline Duct HVAC Vent Blower Fan for Grow Tent, 10'', silver

  • Powerful Air Flow: Heavy hitting blower with a fan speed of 2550 RPM for an air flow of 760 CFM. Moves air through your target location efficiently for optimal ventilation..
  • Runs Smooth and Quiet: Powerful fan puts out only 53 dB noise level..
  • Durable Build: Galvanized steel parts come factory painted to resist atmospheric corrosion from humidity. Tight, precise construction eliminates rattling and reduces wear and tear to give the element a long life..
  • High Tech Design: The aerodynamically designed centrifugal impeller of this unit delivers strong air flow with a disproportionately low sound profile..
Check Stock

1in Caliber High Pressure Pipeline Pump Single Suction Water Pump 12V Inline Directly Connected Centrifugal Pump

  • 【Direct-coupled】The high-pressure water pump does not work independently of the system, it is directly connected to the pipeline, saving installation space and easy to use.
  • 【Well sealed】Our single-impeller water pump is made of plastic material with good plasticity, with good sealing performance and considerable water absorption..
  • 【Single suction pump】The centrifugal pump is a 5way pump with only one suction port, stable performance, suitable for small flow systems.
  • 【Widely Applications】Our small flow five vane pump Suitable for household, industry, cosmetic, electrical appliances.
  • 【Specification】Model: LG50--Discharge: 28(m3/h)--Hydraulic Head: 6m--Power: 50W--Weight: Approx. 525g / 18.5oz.
Check Stock

Power Blades Power Fan - Crawl Space Vent Fan

  • Durable: The fan has a strong motor which features a permanently lubricated bearing that operates quietly and requires no maintenance.
  • Compact But Efficient: This duct fan is compact and lightweight enough to be installed in areas with little available space.
  • With a diameter of 4 inches, speed of 2930 RPM and 100 CFM air flow.
  • Low Noise: Superior balanced centrifugal impeller for long service life & quiet operation.
  • A less than 30 dB noise level does not have any harm and will not disturb your work.
  • Wide Applications: You can have it in bathrooms, kitchens, workshops, basements, attics and etc, in order to boost airflow in HVAC systems.
  • Also, it can be used in grow rooms as intake fans or exhaust fan.
  • Specifications: Voltage 110/120V, Power 14W.
  • Max Operating Temp of Motor is 130℃ / 266℉.
  • Note: Please turn the fan off immediately if the blades get stuck by other objects.
Check Stock