Reviews Wayne Sump Pump Impeller

Wayne 58321-WYN3 CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch, Large, Silver

  • INDOOR USE ONLY - This 3/4 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU980E can pump up to 5,490 GPH to keep your basement dry..
  • TOUGH AND DURABLE - Corrosion-resistant stainless steel motor housing and fasteners come with a cast-iron volute that provides long life in tough sump pump applications..
  • EFFICIENT DESIGN - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole!.
  • ADDITIONAL FEATURES - 1-1/2” NPT discharge for compliance with building codes. The vertical float switch has been tested to 1 million cycles for long-lasting use..
  • QUALITY YOU DESERVE - Proudly assembled in the USA for quality you can trust. Warrantied for 5 years for dependable, efficient, & ultra-quiet performance..
Check Stock

WAYNE - 1 HP Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch - 6,100 Gallons Per Hour - Heavy Duty Basement Sump Pump

  • INDOOR USE ONLY - This 1 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU1000 can pump up to 6,100 GPH to keep your basement dry..
  • TOUGH AND DURABLE - Corrosion-resistant stainless steel motor housing and fasteners come with a cast-iron volute that provides long life in tough sump pump applications.
  • EFFICIENT DESIGN - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole.
  • ADDITIONAL FEATURES - 1-1/2” NPT discharge for compliance with building codes. The vertical float switch has been tested to 1 million cycles for long-lasting use.
  • QUALITY YOU DESERVE - Proudly assembled in the USA for quality you can trust. Warrantied for 5 years for dependable, efficient, & ultra-quiet performance.
  • Assembled in the US with foreign and domestic parts..
Check Stock

WAYNE CDU790 - 1/3 HP Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch - Up to 4,600 Gallons Per Hour - Heavy Duty Basement Sump Pump , Black

  • Indoor Use Only - This 1/3 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU790 can pump up to 4,600 GPH to keep your basement dry..
  • Tough And Durable - Corrosion-resistant epoxy coated steel motor housing and stainless steel fasteners come with a cast-iron volute that provides long life in tough sump pump applications..
  • Efficient Design - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole!.
  • Additional Features - 1-1/2” NPT discharge for compliance with building codes. The vertical float switch has been tested to 1 million cycles for long-lasting use, up to 10 time more than our competitors..
  • Quality You Deserve - Proudly assembled in the USA for quality you can trust. Warrantied for 3 years for dependable, efficient, & ultra-quiet performance..
Check Stock

Wayne SPF33-1/3 Epoxy Coated Steel and Thermoplastic Submersible Sump Pump-Up to 3,750 Gallons Per Hour-Long Lasting and Durable Construction, 1/3 HP

  • Heavy Duty Indoor-Only Pump - WAYNE 1/3 HP SPF33 Pump is a workhorse with rugged and durable design. Durable epoxy coated steel and thermoplastic construction with premium John Crane carbon/ceramic shaft seals for quality that lasts..
  • Customizable Operation - Integrated vertical float switch with a solid, leak-free polypropylene float for automatic operation: 9” ON level and 4” OFF level. Unique top suction design reduces clogging and prevents air lock condition, so no need for weep holes..
  • Reliability Defined - Cast iron seal plate helps prevent leaks and galvanic corrosion. Engineered with upper and lower ball bearings in a sealed oil bath for a virtually silent operation. Abrasion-resistant glass reinforced polycarbonate impeller for reliability..
  • Additional Features - 1-1/2” NPT discharge for compliance with building codes. 8 ft water-resistant power cord provides easy access to nearby GFCI protected outlet. For easy installation, use in 11” diameter or larger sump basins. UL agency approved..
  • Quality You Deserve - Proudly assembled in the USA for quality you can trust. Warrantied for 1 year for dependable, efficient, & ultra-quiet performance..
Check Stock

Little Giant 506160 6-CIA-ML 1/3 HP 2760 GPH 115-Volt Low Level Sump Pump, Blue

  • AUTOMATIC SUBMERSIBLE SUMP PUMP: designed for compact sump systems with integral diaphragm switch activates when water reaches 4 to 7 inches and shuts off when water drops down between 1.5 and 3.5 inches.
  • BUILT TO LAST: Epoxy-coated cast iron housing.
  • nitrile/carbon/ceramic mechanical shaft seal.
  • CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada.
  • APPLICATIONS: designed for compact sump pump systems and general water transfer application. Must sit in water to activate the switch..
Check Stock

Wayne ESP25 Upgraded 12-Volt Battery Backup System, Black

  • Upgraded ESP25 with epoxy steel body and cast-iron base. No more plastic.
  • 2900 GPH at 0′ provides additional protection to your primary Wayne sump pump.
  • Assembled in USA, performance that lasts for years.
  • Audible alarm sounds, notifying you when the back up system is active.
  • Easy to read LED display shows back up system readiness.
  • Requires a 75 amp hour battery, recommended for use with the Wayne Wsb1275 75 amp hour battery.
Check Stock

WAYNE - 1/2 HP Sump Pump with Integrated Vertical Float Switch and 12 Volt Battery Back Up Capability, Battery Not Included - Up to 5,100 Gallons Per Hour - Heavy Duty Basement Sump Pump System

  • Indoor Use Only: This 1/2 HP WAYNE indoor sump system is perfect to keep your basement or indoor area dry during heavy water flow, even if you lose electricity.
  • whether it’s rain, snow melting or more, WAYNE model WSS30VN can keep your basement dry.
  • Back-Up Ready: WSS30VN will pump up to 5,100 GPH and remove/evacuate/expel/get rid of up to 10,000 gallons on a single battery backup charge.
  • WAYNE WSB1275 75 AH Battery is required for back-up but not included.
  • Efficient Design: Comes preassembled and ready for drop-in for easy installation in 15 minutes or less with no need to drill a weep hole.
  • fits in 16” diameter or larger sump basins.
  • Additional Features: The system has been tested to 1 million cycles for long-lasting use.
  • Quality You Deserve: Proudly assembled in the USA for quality you can trust.
  • warrantied for 3 years for dependable, efficient, & ultra-quiet performance.
Check Stock

Superior Pump 92301 1/3 HP Cast Iron Pedestal Pump

  • 1/3 HP Sump pump moves up to 3,000 gallons per hour.
  • pump will lift water up to 20' of vertical height.
  • Stainless steel construction with cast iron base.
  • Durable stainless steel drive shaft, float ball and impeller.
  • 1-1/2 inch NPT discharge for high capacity pumping.
  • Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested.
Check Stock

TecHome Submersible Pump，1/5HP 1650GPH Thermoplastic Utility Water Pump, with 10-Feet Cord, for Swimming Pool, Pond, Garden, Basement.

  • Construction--This sump pump is user-friendly and easy to assemble.Portable handle,easy to carry and storage. The thermoplastic composite material is highly rugged. This pump includes 3/4 inch garden hose adapter(Hose not included), with 10-feet power cord..
  • Performance--This submersible water pump designed with a 1-1/4 inch NPT discharge for high capacity pumping.The impeller is highly corrosion-resistant and the impeller blades can be adjusted automatically to adapt to the speed and fluid viscosity. The submersible pump can continuous duty, thermally protected split capacitor motor..
  • Low Suction Function--The bottom filter of this submersible utility pump can achieve low suction function, reduce impurities in the water to increase the life of the pump. The bottom suction design filters can remove water down to 1/8 inch of surface..
  • Multiple Applications--This water pump is designed to remove water in multiple applications including Garden Ponds, Water Tanks, Swimming Pools, Hot Tubs, Cellars, Flooded Areas, etc. Great to move water for garden irrigation or cleaning your yard or road..
Check Stock

Little Giant Select Series LG-S50T 115-Volt, 1/2 HP, 4300 GPH Cast Iron Sump Pump with Tethered Switch, Blue, 14942675

  • APPLICATIONS: This automatic, heavy duty, cast iron sump pump with tethered switch is ideal for use in residential sump systems or emergency water removal applications.
  • AUTOMATIC PUMP: activates when water reaches 12 to 14 inches, shuts off when water drops to 4 to 6 inches.
  • piggy-back design allows switch to be overridden for emergency water removal or testing.
  • BUILT TO LAST: rugged cast iron volute, housing, motor cover and non-clog type impeller is capable of passing 3/8-inch diameter semi-solids.
  • also features a carbon/ceramic shaft seal.
  • ENERGY-EFFICIENT MOTOR: Permanent Split Capacitor (PSC) motor, 115 Volts, 5.3 Amps, 507 Watts, 60 Hz., thermally protected.
  • PUMP SPECIFICATIONS: 1.5-inch FNPT discharge, 10-ft. power cord, 4300 GPM at 0-ft. lift.
  • 5.5 inches x 8.0 inches x 10.5 inches high.
Check Stock