Reviews Break Cylinder

DONSP1986 PK80 Motor Replaement of Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • PK80 Replaement of Top End Cylinder Set and Bottom End Crank Set for 2 stroke kit 66cc/80cc.
  • better adjusting Clutch a little before riding.
  • PK80 Replaement of Top End Cylinder Set and Bottom End Crank Set with AF80 connecting rod.
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

CDHPOWER PK80 Motor Replacement of Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • PK80 MOTOR REPLACEMENT PARTS ONLY. piston kit is installed well inside of cylinder already.
  • better adjusting Clutch a little before riding.
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

O-Tac Gear Hammershot S1 Kit

  • This kit includes six-shot cylinder, cylinder pin & screws, hammer, trigger, replacement plunger seal, and 8kg spring..
  • When installed, the Hammershot shoots at 80-90 FPS (feet per second)..
  • Mod at your own risk! Increasing the spring tension can break or damage stock internal components of your blaster..
Check Stock

OTC 1205 Universal Cylinder Sleeve Puller for Wet-Type Sleeves in Heavy-Duty Engines

  • This tool removes cylinder sleeves faster than ordinary pullers because it requires little setup time - cone adjustment positions puller jaws quickly....
  • To break 'frozen' sleeves loose, adjustable bridge is positioned on the cylinder block then bearing-mounted forcing nut is tightened.
  • Next, bridge is removed and slide hammer assembly is attached - with a few sharp hammer blows from the 5 lb. hammer, sleeve is pulled - an average of....
  • Does not require any special adapters to pull sleeves due to adjustable jaw design.
  • adjustable jaws allow use on cylinder sleeves ranging from 3....
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

10 ton Ultra-Thin Hydraulic Lifting Cylinders Stroke 11 mm（0.44\） Hydraulic Cylinder Industrial Lifting Jack Ram Low Height

  • *Low height:10 ton Ultra-Thin Hydraulic Lifting Cylinders Stroke 11 mm（0.44"） provide the maximum power to height ratio. A compact, low height cylinder design is ideal for confined spaces where other cylinders will not fit.
  • *Stopping ring: protect the cylinder when the stroke get to top, absorbing heaviness from the other side.
  • *Plated steel plungers:hard chrome plated high quality steel plungers plunger avoid break ing when it is overloaded.
  • *Single-acting spring return: provides fast and complete retraction.
  • *Copper ring:high-standard copper welding, protected when the cylinder is loading.
Check Stock

20 ton Ultra-Thin Hydraulic Lifting Cylinders 20 Ton Stroke 0.52\ Hydraulic Cylinder Industrial Lifting Jack Ram Low Height

  • *Low height:20 ton Ultra-Thin Hydraulic Lifting Cylinders Stroke 13 mm（0.52"） provide the maximum power to height ratio. A compact, low height cylinder design is ideal for confined spaces where other cylinders will not fit..
  • *Stopping ring: protect the cylinder when the stroke get to top, absorbing heaviness from the other side.
  • *Plated steel plungers:hard chrome plated high quality steel plungers plunger avoid break ing when it is overloaded.
  • *Single-acting spring return: provides fast and complete retraction.
  • * Corrosion resistance:hard chrome plated high quality steel plungers and cylinder wall for increased corrosion resistance.
Check Stock

DockMoor Fix Sinking Office Chair Upgrade 304 Stainless Steel with Hexagon Wrench Adjustable Height Chair Saver kit with Leather Pads

  • Upgraded office chair saver for stop sinking is made of 304 stainless steel, which has strong load-bearing capacity, more practical and effective, not easy to break or crack compared to other plastic products..
  • Fit size for gas cylinder charirs -- Universal suitable for most office chairs, the cylinder diameter is within 25-28mm.(0.98-1.1inch)..
  • Office chair buddy -- The height of the chair can be adjusted and fixed according to your needs, bringing a comfortable seating experience to you..
  • Upgraded chair sinking stopper -- our sinking clamp also made with 304 stainless steel, will not rust in daily use, blue solicone pads, the friction is greater and it fits closely with the cylinder to prevent the seat from sinking, Also prevents unsightly marks from damaging the chair..
  • Easy to install -- Come with an office chair sink stop and a free hexagon wrench to tighten the screws, No need to disassemble the chair or cylinder, a safe and adjustable chair fix replacement,save $200 for a new chair..
Check Stock

Flower Acrylic Vase Decorative Centerpiece for Home or Wedding by Royal Imports - Break Resistant - 5\ Cylinder by 5\ Tall

  • QUALITY: 5" Hard Plastic Cylinder vase is handcrafted to perfection and is made of crystal clear acrylic to maximize content visibility. Each cylinder features thick acrylic walls and weighted base to ensure durability. Imported..
  • BEST SELLER: Hard plastic cylinder vases, commonly referred to as clear acrylic vases are best sellers in the floral supply, home décor, and wedding planning industry. From home decorators, to event planners, everyone makes use of a good quality basic cylider. It will enhance any romantic event when filled with roses, even restaurant tables when filled with candles , or any party when filled with lights and vase fillers..
  • USES: The Acrylic Cylinder is very popular with fresh flower arrangements as well as silk or dried floral designs. But it is also commonly used as candle holders, storage containers (in modern offices),aquariums or fish tanks, pot-pourri containers, and centerpieces filled with gems or lights.
  • BREAK RESISTANT: These hard plastic cylinders are made of high quality acrylic. The Heavy Duty material used for this product is specicially designed to withstand any resistance unlike glass..
  • DIMENSIONS: 5 Inches Height by 5 Inches Width- This vase is perfectly round.
Check Stock

Flower Acrylic Vase Decorative Centerpiece for Home or Wedding by Royal Imports - Break Resistant - Cylinder Shape, 6\ Tall, 6\ Opening

  • QUALITY: 6" Hard Plastic Cylinder vase is handcrafted to perfection and is made of crystal clear acrylic to maximize content visibility. Each cylinder features thick acrylic walls and weighted base to ensure durability. Imported..
  • BEST SELLER: Hard plastic cylinder vases, commonly referred to as clear acrylic vases are best sellers in the floral supply, home décor, and wedding planning industry. From home decorators, to event planners, everyone makes use of a good quality basic cylider. It will enhance any romantic event when filled with roses, even restaurant tables when filled with candles , or any party when filled with lights and vase fillers..
  • USES: The Acrylic Cylinder is very popular with fresh flower arrangements as well as silk or dried floral designs. But it is also commonly used as candle holders, storage containers (in modern offices),aquariums or fish tanks, pot-pourri containers, and centerpieces filled with gems or lights.
  • BREAK RESISTANT: These hard plastic cylinders are made of high quality acrylic. The Heavy Duty material used for this product is specicially designed to withstand any resistance unlike glass..
  • DIMENSIONS: 6 Inches Height by 6 Inches Width- This vase is perfectly round.
Check Stock

CDHPOWER 2 Stroke LD90 Motor w/o CDI -Upgraded pk80 Motor Silver Color Engine-Gas Motorized Bicycle 66cc/80cc

  • CDHPOWER LD90 Motor w/o CDI and Excluding 2pcs anti vibration black rubber for the motor mount,upgraded pk80 motor.
  • better adjusting Clutch a little before riding..
  • Includinhg spark plug and piston kit；Excluding two head plug CDI Box ( Asin for two head plug CDI: B098Q988VJ ).
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
  • FYI: the LD90 motor is compatible with all brand 2 stroke 66cc/80cc gas motor kit.
Check Stock