Reviews Brake Rotor Bolt

Mountain Bike Disk Brake Set G3/ HS1 Bicycle Disc Brake Kit Front and Rear 160mm Caliper Rotor with Bolts and Cable (HS1 A Disc Brake Set)

  • F160R140mm--front clipers,means choosing the 160mm rotors if you want to intall the clipers at the front wheel,and for rear wheel you have to choose the 140mm rotor.
  • F180R160mm--front clipers,means choosing the 180mm rotors if you want to intall the clipers at the front wheel,and for rear wheel you have to choose the 160mm rotor.
  • It is general for mountain bikes and electric bicycle?Front and Back - 160mm rotor diameter..
  • Center 6 bolt pattern diameter on rotor is 44mm..
  • Disc brake Rotor, disc brake caliper and to make the disc brake pads can not be stained with oil, change the disc brake caliper or to make the disc brake pad before the rotors to avoid oil on the disc brake disc will affect the brake effect, you can use alcohol to clean the disc brake rotors..
Check Stock

Choose Mountain Bike Brake Disc Rotor Bolts Red

  • Bike disc bolts fit for Hope / Shimano / SRAM / Hayes / Magura / Formula /Race front and rear Brake, and other 6-bolt brake rotors..
  • Perfectly compatible 140/160/180/203 Brake Rotor.
  • Strong Material : High quality stainless T25 steel material protects rotor screws from rust in all environmental conditions and guarantees powerful rotation strength.
  • Torx Head Bike bolts.Easy Installation: Extremely simple installation even for novices.
  • Color: Black, Blue ,Green, Golden, Orange ,Red ,.
Check Stock

Disc Brake Rotor Cover, 2Pcs/Set Universal Auto Car Wheel Aluminium Disc Drum Rotor Trim Decorative Covers Retrofit Brake Racing Cover 26cm(Red)

  • ▶ 【Professional accessories】26cm diameter, the disc brake rotor cover fit for vehicles with 14 inch or larger wheels, 4 or 5 bolt patterns.
  • ▶ 【Functional Utility】 Circulate air around the brake to help dissipate heat. It can reduce the accumulation of brake dust on the wheels. Give the vehicle the appearance of a cross-drilled rotor for racing..
  • ▶【High Quality】The Disc Brake Rotor Cover is made of aluminum alloy and chrome-plated surface, durable. It is also non-polluting during the process and is very environmentally friendly..
  • ▶【Easy To Install】 Lift and firmly support the vehicle. Remove the wheels from the vehicle. Install the brake disc cover onto the vehicle bolts to ensure correct installation. Clean the disc cover and wheel hub with brake cleaner, alcohol or similar cleaner..
  • ▶【Brand New】100% brand new high quality disc brake cleaner cover, strictly full tested to ensure the best quality before shipment, safe to use..
Check Stock

D Dymoece 2 Pcs Bike Disc Brake Rotors with 12 Bolts 140mm/160mm/180mm/203mm for MTB Mountain Road Bicycle BMX

  • Suitable for shimano deore MTB mountain road bike disc brake systems with 6-bolt hubs.
  • Package: 2pcs brake rotors with 12 bolts.
Check Stock

BlueSunshine Front and Back Disk Brake Kit - 160mm For 80cc Gas Motorized Bicycle - Freewheel Threaded Hubs Hole distance of 48mm

  • Complete 26" Mechanical Disk Brake Kit, Front and Back - 160mm rotor diameter..
  • Center 6 bolt pattern diameter on rotor is 48mm..
  • This kit comes with 2 mounting adapter, your hub need to either have the same 6 bolt pattern to mount the rotor directly or you can use the mounting adapter on your threaded hub (1.37 x 24 tpi)..
  • This kit works best with our motorized bicycle frames and KMB frames..
  • Caliper Holders are NOT included but are required..
Check Stock

NEW SOUTHWEST SPEED REAR 1 PIECE 11.25\ DISC BRAKE ROTORS AND HATS, 1\ THICK, 5 X 4.5\ AND 5 X 4.75\ BOLT PATTERNS, VENTED, STEEL, STRAIGHT-VANED, HIGH PERFORMANCE RACING DISCS

  • Brand New Southwest Speed Rear Brake Rotor / Hat Set (SWS Part # 203-8574 x 2).
  • These rotors are designed to put disc brakes on the rear of almost any vehicle by using these rotors in conjunction with several caliper options and either weld-on or bolt-on caliper mounting brackets.
  • Features:| 003e Vented, steel, straight-vaned rotor 003e 11.25" Diameter 003e 1.00" Thick 003e Drilled for both 5 x 4 1/2" and 5 x 4 3/4" bolt patterns.
  • Measurements from Diagram (Shown in the images) 003e Rotor Diameter: 11.25" 003e Rotor Width: 1.00" 003e Offset: 1.314" 003e Center Hole Diameter: 2.780" 003e Clearance I.D.: 6.250" 003e Face Thickness: 0.236" 003e Stud Bolt Circle: 5 x 4.5" and 5 x 4.75".
Check Stock

Power Stop K200 Front & Rear Brake Kit with Drilled/Slotted Brake Rotors and Z23 Evolution Ceramic Brake Pads

  • Power Stop engineered carbon-fiber ceramic compound significantly enhances braking performance versus traditional ceramic brake pads.
  • Low dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE.
  • Rotors are zinc plated for maximum protection against rust. Rotor Height- Front-1.9 inch, Rear- 1.6 inch. Hub Hole Diameter- Front-2.8 inch, Rear-2.8 inch. Bolt-On Ready: No modifications needed to your vehicle.
  • Includes stainless steel installation hardware and high temperature ceramic brake lubricant. Minimum Rotor Thickness: Front- 0.9 inch, Rear-0.3 inch. Nominal Rotor Thickness-Front-1 inch, Rear-0.4 inch. Outside Diameter-Front-11.8 inch, Rear-11 inch.
  • CONFIRM FITMENT with the Product Description below!.
Check Stock

ACDelco Silver 18A812A Front Disc Brake Rotor Medium

  • Manufactured with multiple alloys for improved heat dissipation and performance.
  • Quality validated for proper metallurgy and correct brake plate thickness.
  • Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage.
  • Economical value with dependable quality. Rotor Diameter-10.94 inch. Rotor Height-2.1 inch. Nominal Thickness-1.27 inch. Minimum Thickness-1.21 inch. Bolt Circle-4.65 inch.
  • For General Motors vehicles as well as most makes and models.
Check Stock

Power Stop AR8658EVC rear Evolution Genuine Geomet® Coated Brake Rotor

  • Clean Ride Ceramic keeps your wheels dust-free & Genuine Geomet Coated rotors maintain that new car look.
  • Brake rotors are fully coated, including inside the vanes to extend rotor life, to maintain that great look behind open wheels.
  • Buy with confidence from the originator & industry leader of brake kits. Bolt-On Ready: No modifications needed to your vehicle.
  • Evolution coated rotors are manufactured with Tru-Cast technology, resulting in a percision cast and machined product.
  • Bolt on upgrade for stock brakes, no modifications necessary.
Check Stock

A-Premium Front Disc Brake Rotors Set Compatible with Nissan Altima 2007-2019 2-PC-Set

  • 【Perfect Fitment】Compatible with Nissan Altima 2007-2019---Front Left and Right, Driver and Passenger Side.
  • 【Reference Number】The A-Premium Disc Brake Rotor's reference number: S-31464, S31464, 63167066L, 63167066R, JBR1558XPR. Before placing an order, verify that the part is compatible with your vehicle using the compatibility system..
  • 【Specification】Mounting Bolt Hole Quantity : 5.
  • G3000 metallurgy and metallic coating of brake discs can effectively prevent rust and corrosion, extending the lifespan. Industry low runout and DTV specifications enable smooth disc operation, low dust, noise reduction, and excellent braking power..
  • 【Directly Fit】OE Replacement Disc Brake Rotors. Please enter your vehicle information in the top left corner of listing and check our "Special Note" before ordering.
  • 【Customer Support】1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this Disc Brake Rotor is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock