Reviews Brake Rotor Hub

Power Stop K200 Front & Rear Brake Kit with Drilled/Slotted Brake Rotors and Z23 Evolution Ceramic Brake Pads

  • Power Stop engineered carbon-fiber ceramic compound significantly enhances braking performance versus traditional ceramic brake pads.
  • Low dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE.
  • Rotors are zinc plated for maximum protection against rust. Rotor Height- Front-1.9 inch, Rear- 1.6 inch. Hub Hole Diameter- Front-2.8 inch, Rear-2.8 inch. Bolt-On Ready: No modifications needed to your vehicle.
  • Includes stainless steel installation hardware and high temperature ceramic brake lubricant. Minimum Rotor Thickness: Front- 0.9 inch, Rear-0.3 inch. Nominal Rotor Thickness-Front-1 inch, Rear-0.4 inch. Outside Diameter-Front-11.8 inch, Rear-11 inch.
  • CONFIRM FITMENT with the Product Description below!.
Check Stock

Raybestos 980417 Advanced Technology Disc Brake Rotor

  • Raybestos Disc Brake Rotor is attached to wheel hub and controls the motion of the vehicle when brakes are applied.
  • It features advanced technology metallurgy and mill balanced for long lasting durability.
  • This rotor is designed for excellent braking and includes rust prevention coating.
  • Designed to provide better braking to the vehicle with minimal noise and dusting.
Check Stock

For Hyundai Genesis Coupe R1 Concepts eLine Front Rear Black Slotted Brake Rotors Kit + Ceramic Pads

  • Package Includes 4 Brake Rotors And 8 Ceramic Brake Pads.
  • Diamond Slotted To Increase Brake Pads Bite.
  • Diamond Slots Acts As A Rotor Wear Indicator.
  • 100 Percent Guaranteed Direct Fitment – No Modification Required.
  • Black Zinc Plated To Provide Rust Protection On Hub And Vanes.
Check Stock

DENESTUS Steel 4 Stud Front Wheel Rim Hub with Bearing Assembly with Steering Knuckle and Master Cylinder 2pcs Disc Disk Rotor,Caliper for 125cc 150cc 200cc Quad Buggy 4 Wheeler ATV UTV DIY etc

  • ■ DENESTUS Upgraded Front Steering Knuckle Spindle Wheel Hub Assembly Caliper Rotor fits for 125cc 150cc 200cc 250cc Quad Dirt Bike ATV Buggy Motorcycle DIY etc..
  • ■ Size : Diameter of Centre Hole,Axle Diameter: Approx. 17mm / 0.66inch.
  • ■ Noted : Please refer to the picture for detailed size, It is very important..
  • ■ Package Includes : 2 Piece Front Brake Disc Rotor+ 1 Piece Front Brake Caliper+1 Pair Front Wheel Rim Hub+1Pair Left & Right Steering Knuckle Spindle..
  • ■ DENESTUS Free Shipping Fast Stock By USA. We promise provide 100% satisfied after-sales service.Contact us for any problem, we will reply to help you solve your confusion..
Check Stock

DONSP1986 Bicycle Wheel Part Bicycle Front Hub 36 Hole,Alum Alloy, 100mm Width,Bike Front hub

  • Bicycle Wheel Part Bicycle Front Hub 36 hole,Alum Alloy, 100mm Width,Bike Front hub.
Check Stock

Farbetter Bike Disc Brake Kit Including Front and Rear Caliper 160mm Rotor Mechanic Tool-Free Pad Adjuster for Mountain Bike Road Bike Fixed Gear Bike MTB BMX Red

  • Brake System: Mechanical Disc Brake System with 2 x 160mm Rotor, 1 x Front Brake Caliper.
  • 1x Rear Brake Caliper, 1x Rear Brake Cable, 1x Disc Rotor Adjuster, and 12 X Disc Brake Rotor Screws..
  • High-quality materials: Brake Calipers Include XTR Disc Brake Pads, braking sensitive and quiet, high temperature resistance. Reinforced disc brake base design, high strength and anti-breaking..
  • Dimension: IMD international dimension, front caliper for 160/180mm rotor, rear caliper for 140/160mm disc. Extra Gadgets-Disc Rotor Adjuster, help you to adjust the gap between rotor and caliper easily..
  • Ideal Replacement: with fine workmanship, is your bicycle ideal upgrade parts, and packed in a box to presented in the original for you..
  • Widely Compatible: Suitable for most Mountain Bike, Road Bike Mechanical Disc Brake System..
Check Stock

Astro Pneumatic Tool 78830 Heavy Duty Hub Drum and Rotor Puller Kit

  • Use with impact wrench to remove hubs, drums and brake rotors (dics).
  • Durable 8.5 ton rated forged design, made from same alloy used on Astro's famous ball joint presses.
  • Use with 1-1/4" socket and 1-1/4" or 32mm wrench.
  • Drum & Rotor pulling arms include raised stops for use with ratchet straps (not included) for especially difficult applications.
  • Includes three different hub adapters to fit all types of hub sizes, arms spread up to 14” wide.
Check Stock

Sunlite BRAKESET SUNLT MX1000 ALY RRw/FT Bolt BK

  • Used for brake systems of ordinary bikes, mountain bikes and road bikes..
  • Freewheel Threaded Hubs, Hole distance of 48mm, an inner diameter of 34mm(approx).
  • Position: Front / Rear. F-160mm/R-140mm. F-180mm/R-160mm. ROTOR MOUNTING BOLTS are included.
  • Note: F160 Front Brake: (Also named F160/R140) If installed at front wheel, it fits 160mm rotor, but if installed at rear wheel, it fits 140mm rotor. R160 Rear Brake: (Also named F180/R160) If installed at front wheel, it fits 180mm rotor, but if installed at rear wheel, it fits 160mm rotor..
  • Package Content: Mechanical Bike 160mm Rotor Front and Back Brake Disc Kit x 1.
Check Stock

Power Stop K2798-36 Z36 Truck & Tow Front and Rear Brake Kit

  • Proprietary carbon-fiber ceramic materials enhance the strength of a typical ceramic brake pad compound to handle heavier loads.
  • Low dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE.
  • Drilled & Slotted performance rotors for maximum cooling. Rotor Height- Front-2.2 inch, Rear- 3 inch. Hub Hole Diameter- Front-2.8 inch, Rear-2.8 inch.
  • Includes stainless steel installation hardware and high temperature ceramic brake lubricant. Bolt-On Ready: No modifications needed to your vehicle.
  • Wrangler JK 2018. Our Z36 Truck & Tow Brake Upgrade Kit is recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well.
Check Stock

Farbetter Mechanical Bike Disc Brake Kit, Including Front and Rear Caliper, Brakes Cables, Brake Levers, 160mm Rotor, with Cable End Tips Caps, Rotating S-Hook Clips, Disc Rotor Adjuster (Black)

  • Brake System: Mechanical Disc Brake System with 2 x 160mm Rotor, 1 x Front Brake Caliper.
  • 1x Rear Brake Caliper, 1x Brake Cable Kit, 1x Disc Rotor Adjuster, 4x Cable End Tips, 2x Rotating S-Hook Clips and 12 X Disc Brake Rotor Screws..
  • High-quality materials: Brake Calipers Include XTR Disc Brake Pads, braking sensitive and quiet, high temperature resistance. Reinforced disc brake base design, high strength and anti-breaking..
  • Ideal Replacement: Choose the best for each component, and you can upgrade it in one step with only one purchase. With fine workmanship, is your bicycle ideal upgrade parts, and packed in a box to presented in the original for you..
  • Dimension: IMD international dimension, front caliper for 160/180mm rotor, rear caliper for 140/160mm disc. Extra Gadgets- Cable End Tips prevents wire core from bifurcating, resulting in uneven force on the wire core off-line.
  • Disc Rotor Adjuster help you to adjust the gap between rotor and caliper easily..
  • Widely Compatible: Suitable for most mountain bike of mechanical disc brake system. Please check the size of your bike and whether it is suitable to install mechanical disc brakes to avoid buying it by mistake..
Check Stock