Reviews Air Spring Solenoid

3-Way Solenoid Valve 3/8\ with All Fittings (12-Volt)

  • These have an air inlet, an air outlet and an exhaust port..
  • Allow a much greater amount of air to flow through the valve and into your prop. Great for props that need a lot of lift or a quick lift..
  • Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open)..
  • Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop's motion..
  • Has two 3/8" air ports and one 3/8" breather port. Comes with: 3/8" 3-Way Solenoid (2) 3/8" Male Straight fittings with 3/8" push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead.
Check Stock

1\ Bore X 24\ Stroke Double Acting Pneumatic Cylinder (Roughly 1\ Bore 20MM)

  • These pneumatic cylinders are what everyone uses to make Halloween Props. They are extremely versatile, and have tons of mounting options that will allow you to set up your prop in may different ways.
  • You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly..
  • Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore.
  • These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid)..
  • This is the measure of the diameter of the cylinder. Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure. Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline..
Check Stock

Hornblasters Katrina 5 Chime Black Train Horn

  • Quality Metal Design - This horn was designed with durability in mind. This horn was made to survive in the toughest climates. Rain, sleet, or snow, the Katrina has got your back..
  • Manifold Design - All five trumpets sit on a specially designed manifold. This manifold routes the air from the inlet to all 5 bells. This horn takes up a decent amount of space however it is very easy to install..
  • Pre-installed Solenoid Valve - This horn features a pre-installed 3/8" solenoid valve with a 1/2" inlet. This horn is ready to accept 1/2" air line directly out of the box. Simply wire one lead of your solenoid to positive, and ground the other lead..
  • 1/2" Air line - The Katrina sounds best when matched with 1/2" air line. We include 10' of 1/2" air line with each Katrina horn. Running 1/2" line with this horn ensures a great honk every time..
Check Stock

1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve

  • .WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position..
  • .2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum)..
  • .Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
  • .This solenoid valve has one G1/4" inch DN8 inlet and one G1/4" inch DN8 outlet port. Valve stays close when the coil is de-energized- and it opens when energized..
  • .1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas..
Check Stock

RuiLing 1PC JF-0730B 12V 1A 5N Push Pull Type Open Frame Solenoid Electromagnet

  • Push Pull Type, linear motion, open frame, plunger spring return, DC solenoid electromagnet..
  • Support DC 12V voltage, high power, Push pull type, linear motion, is easy to install..
  • DC solenoid electromagnet mainly used in vending machines, transport equipment, office facility, household appliance, mechanical, etc..
  • Package includes: 1 x DC Solenoid Electromagnet.
Check Stock

X AUTOHAUX Car AC Compressor Electronic Control Solenoid Valve PXE13 PXE16 for Audi A3 2007-2014

  • Compatibility: AC Compressor Control Solenoid Valve for Volkswagen Jetta 2005-2014, for Volkswagen Tiguan 2009-2015, for Volkswagen Beetle 2005-2014, for Volkswagen CC 2009-2014, for Volkswagen Golf 2005-2007, for Volkswagen Golf 2010-2013, for Volkswagen Passat 2007-2010, for Volkswagen Passat 2012-2015, for Volkswagen GTI 2006-2014, for Volkswagen Rabbit 2006-2009, for Audi A3 2007-2014.
  • OE Number: Suitable for PXE13, PXE16. Please check the OE number before purchasing the product..
  • Symptoms of a failing factory air conditioner compressor control valve including an air conditioner that does not blow cold air. Replacing the control solenoid valve solves the common problem with AC not blowing cold air..
  • Great cooling efficiency. The control solenoid valve is easy to install and convenient to use..
  • Please check the fitment and OE number before purchasing the product..
Check Stock

28250-P6H-024 Transmission Dual Linear Shift Solenoid Gasket For Honda Acura Accord Odyssey Prelude Pilot 1998-2003 Replace 28250P6H024

  • ✔【Ideal replacement】：A bad solenoid cannot effectively control the flow of transmission fluid, causing delays or unexpected friction between the shift gears. This solenoid is comparable in fit, form and function to the original part, exactly OEM design to replace your defective solenoid.
  • ✔【Compatible with】Fits for 1998-2002 Honda Accord 4 Cyl, 1998-2007 Accord 6 Cyl, 1998-2006 Odyssey, 2003 2004 2005 2006 2007 Pilot, 97 98 99 00 01 Prelude | 1998-1999 Acura 2.3 CL, 1998-1999 Acura 3.0 CL, 2001-2003 Acura 3.2 CL, 1999-2003 Acura 3.2 TL, 01-02 Acura MDX.Please check the part number to compare whether it suits your car before you purchase..
  • ✔【Transmission Shift Solenoid Replace OEM】 : 28250-P6H-024, 28250P6H024..
  • ✔Package include: 1 x Linear Solenoid + 1pcs gasket +3pcs O-rings.
  • It is consisting of a spring loaded plunger wrapped with a coil of wire, and design to open or close valves in the valve body to permit transmission fluid to enter..
  • ✔【Product Warranty】: 12-Month Warranty: If the torque converter solenoid fails, stops working or any other problems, you can rely on our service of carefree REPLACEMENT or REFUND..
Check Stock

X AUTOHAUX AC Compressor Control Solenoid Valve VCS14EC DCS17EC AC Air Conditioner Control Valve Replacement for Nissan Altima 2013 2014 2015 2016 2017 2018

  • Applicability: This ac compressor control solenoid valve is suitable for Nissan Altima 2013 2014 2015 2016 2017 2018. Note: but it doesn't fit for Nissan Altima 2.5 S 2015. Please check product size and fitment before order..
  • Function: The ac compressor control solenoid valve is a component that regulates the cooling and heating of the vehicle's central air conditioning. It changes the air flow of the compressor by closing the automatic opening and closing valve of the electromagnetic force so that the air conditioner can be cooled normally..
  • Material: Made of durable metal plastic materials. The product maintains good performance in various environments. It is safe to use and has long service life..
  • Installation: Easy to install, you only need to remove the old compressor solenoid valve in your car and directly replace it with our new compressor solenoid valve. After that, the air conditioner will cool normally and with better cooling efficiency..
  • Package: The package includes 1 x AC Compressor Control Valve VCS14EC DCS17EC. It does not include installation tools. Since this product is only suitable for some cars, please be sure to check whether your car is suitable for this product..
Check Stock

4-Way Solenoid Valve 1/4\ With All Fittings (12-Volt) for Pneumatic Cylinders, Includes 1/4\ push-in air fittings and speed control brass mufflers

  • These have an air inlet, an air outlet and an exhaust port..
  • Allow a much greater amount of air to flow through the valve and into your prop. Great for props that need a lot of lift or a quick lift..
  • Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open)..
  • Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop's motion..
  • Has two 1/4"air ports and one 1/4"breather port. Comes with: 1/4" 4-Way Solenoid (2) 1/4"Male Straight fittings with 1/4"push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead.
Check Stock

Baomain Solenoid Electromagnet BM-0530B DC 24V 700mA 10mm 1.5Kg 3.3LB Tubular

  • Package Content : 1 x DC Push Pull Type Solenoid Electromagnet.
  • Support DC 5V voltage, linear motion, is easy to install..
  • Push Pull Type, linear motion, open frame, plunger spring return, DC solenoid electromagnet..
  • DC solenoid electromagnet mainly used in vending machines, transport equipment, office facility, household appliance, mechanical, etc..
Check Stock