Reviews Air Valve Spring

iPower 4 inch Backdraft Shutter Damper Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 4", HVAC Extractor Fan Vent, Range Hoods

  • Lightweight valve wings: The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The backflow flap closes automatically at low air volumes. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
  • Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
  • One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
  • Material: The 4 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 °F.
  • Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathro....
Check Stock

RKX Hybrid Diverter Valve BOV replacement VW and Audi 1.8T 2.7T Blow off valve

  • Genuine RKX hybrid style diverter valve / blow off valve.
  • The RKX hybrid splitter diverter valve is compatible with all turbocharged and supercharged applications that can accept a 24mm port.
  • The valve has an aluminum piston for fast response and high boost pressure durability. The RKX Valve is fully rebuildable and tunable. This is a must....
  • This is a hybrid BOV / recirculation valve that has been designed to work with engines that have have metered air flow systems (Mass air flow sensor,....
  • The RKX diverter valve is fully adjustable by turning the top to set the spring preload. The valve can be use in applications ranging from 8 - 28 PSI.
Check Stock

KIMISS Trim Motor, Power Tilt Trim Motor 69J-43880-00 Replacement for Yamaha F200 F225 F250 LF200 200-250 H.P.

  • Ideal for removing valve springs, spring retainers by compressing the valve spring retainer and exposing the valve keeper, remove keepers, uncompress the tool then remove spring - ecotech lnf valve spring tool.
  • Tool spring depth reach grips to retainer are adjustable to fit most large and small spring applications - valve spring compressor tool.
  • Features a reversible jaw adaptor and an automatic cam-action locking to a pre-determind setting.
  • Allow valve springs and valve stem oil seals to be replaced with the cylinder head - valve spring compressor.
  • Ideal for removing valve springs, spring retainers by compressing....
Check Stock

Makita EK7301X1 14' 73 cc Power Cutter with Diamond Blade

  • Improved decompression valve and metering spring for precise fuel regulation at start up..
  • Ignition coil with start-support function stores electrical energy with each pull for easier start ups.
  • On-Off-Choke operation switch on a single lever for operator convenience.
  • Five stage filtration system with advanced directional air flow, provides cleaner air for better saw performance.
  • Starter grip decompression valve for faster starting.
  • Carburetor engineered with improved deco-valve and metering spring for precise fuel regulation at start up.
  • Reinforced aluminum blade guard with 70 Degrees range of limitless positioning using a marked knob handle.
  • Cutting arm position simply changes from center position to flush outboard position allowing cuts directly adjacent to work.
  • New ignition coil with start-support function stores electrical energy with each pull for easier start ups.
  • Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank.
Check Stock

QIBAOACR 40pcs Tire Valve Cores Car Bicycle Tyre Valve Core Remover Repair Tool Valve caps Valve Stem Cores Motorcycle Tire Valve Cores Wrench

  • 1.Designed with a seal attached to a movable, spring-loaded pin that allows pressurized air to pass when inflating a tire.It's always a good idea to keep some spare valve cores and valve tool handy.
  • 2.Accepts working air pressure up to 300 PSI.It is often necessary to wring out the valve core when aerated or deflate the tire, then you need the tire valve removal tool..
  • 3.Designed for use in any car, truck, motorcycle, bicycle, ATV along with any other vehicle that utilizes tires..
  • 5.Package includes: 20x Valve Cores+20Tire valve cap+1 Tire Valve Cores Wrench. Our picture may not be beautiful, but it was taken in kind, so you can buy it with confidence.
Check Stock

POSEAGLE 799869 499059 Carburetor with 795259 Air Cleaner Primer Base 790849 699056 Spring Tune Up Kits Replaces 792253 497586 Pressure Washer Carburetor

  • Carburetor Replaces Briggs&Stratton 497586 499059 Carburetor,Lawnmower 799869 792253 Pressure Washer Carburetor.
  • Air Cleaner Primer Base Replaces Briggs&Stratton 795259 224815 691753 792040 496116,Air Filter Replaces Briggs&Stratton # 491588 491588S 399959.
  • Fuel Filter Replaces Briggs&Stratton # 298090S.
  • Spring Replaces Briggs&Stratton # 699056 &790849 Spring.
  • Fuel Shutoff Valve Replaces Briggs&Stratton # 698183 494768 493960.
  • Carburetor Repalces Briggs&Stratton Lawn Mower Pressure washer part number:121XXX 122XXX 123XXX with Choke.
  • Fits Briggs&Stratton # 127800 128800 120K00 121K00 122K00 122T00 123K00 124K00 124L00 124T00 125K00 126L00 126T00 12F800 12H800 4 Cycle Small Engine,Vertical shaft 121, 122, 123 and 125 series with a choke.
  • Package Includes:1 carburetor,1 air cleaner primer base,2 springs,2 gaskets,1 air filter,1 fuel filter,1 fuel shutoff valve,1 spark plug,4 clamps.
  • Reminding:This is non-original Product,100% new product.
  • Reliable Quality and Competitive price,100% tested before sending out..
Check Stock

Hon&Guan 10 inch Backdraft Damper, One-Way Airflow Ducting Insert Backflow Preventer Duct Draft Blocker, HVAC Inline Fan Vent

  • 【Material】The 10 inch backdraft damper and the flap leaves is made of a Galvanized steel, the Axis are made of aluminum, while the spring are made of carbon steel..
  • 【Installation method】The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
  • 【Wide applications】Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications..
  • 【Lightweight valve wings】The valve wings open under the pressure created by the airflow.
  • when the air flows in the opposite direction, it is automatically closed under the action of the spring, so as to cut off the flow..
  • 【Backdraft Shutter】Hon&Guan Draft Blocker designed to improve ventilation by preventing air from re-circulating when the fans are not in use, rubber ring ensure 100% closure and quiet closing..
Check Stock

gohantee R410A Valve Core Remover Installer with Dual Size SAE 1/4 & 5/16 Port AC Valve Core R22 HVAC Valve Core Removal Installer Tool Air Conditioning Line Repair Tools

  • [FITMENT] The valve core grabber tool can adapt to R22 R134 R410 R32R air-condition, external bypass port design can remover valve cores..
  • [FUNCTION] The Schrader's core grabber with disconnect valve remove and install valve cores without the loss of refrigerant. No need to stop the machine or release the refrigerant..
  • [DESIGN] Convenient and light, spring design, make it work more effort. There is a ball valve that can be opened and closed in just a quarter-turn rather than a stem-type valve. Replace damaged leaking valve core without loosing the charge in air condition systems..
  • [PREMIUM QUALITY] This valve core remover installer tool is made of is made of heavy duty stainless steel and copper materials, solid and sturdy, durable and long life to use..
  • [SERVICE GURANTEE] Package include: 1Pc 1/4" & 5/16" SAE Valve Core remover and install tool. This valve core remover comes complete with 1-Year warranty. If you have any problem, feel free to contact us..
Check Stock

ATPEAM Overhead Valve Spring Compressor | Universal Automotive Engine Removal Repair Install Tool

  • The ATPEAM universal overhead valve spring compressor is a great option for compressing valve springs - facilitating valve spring removal or valve stem seal replacement on many cars, vans, & light trucks.
  • Constructed of quality carbon steel for durability and longevity.
  • strong bearings provided to withstand high force to easily compress springs.
  • coated with zinc and black oxide, this valve compressor tool is resistant to rust and corrosion.
  • Easily remove valve springs in passenger and light commercial vehicles with this valve spring tool.
  • This compression tool works on foreign vehicles, domestic vehicles, and vehicles with dual springs and inner and outer springs.
  • Compressing springs can be difficult and dangerous, but this spring compressor features two different length jaws grips that easily attach to the valve spring for a secure hold on the part.
  • The overhead design allows you to easily attach the valve tool to your valve springs without having to take the cylinder head from the vehicle for quick removal and installation.
  • Package: 1 x Overhead Engine Valve Spring Compressor Tool.
Check Stock

OTC 4573 Universal Overhead Valve Spring Compressor

  • OTC's Universal Overhead Valve Spring Compressor is a great option for compressing valve springs - facilitating valve spring removal or valve stem....
  • Ideal for use on installed cylinder heads, especially in vehicles with tight underhood clearances, but can be used for bench work as well.
  • Spring loaded jaws easily grip and compress valve springs.
  • Legs designed with a built-in offset to compensate for spring wind - keeping tool vertical and stable during use.
  • fits valve spring retainers up to 1-13/16 inch diameter.
Check Stock