Reviews 85mm Nozzle

uxcell 1/2PT Navy Blue Orange Thread Flexible Flat Nozzle Oil Coolant Hose

Check Stock

Baomain ZU05S 6mm Vacuum Ejector Push in One Touch Tube Type Pneumatic Fitting

  • Type: Push in Tube Type(Without Exhaust).
Check Stock

IC3D Black 2.85mm PLA 3D Printer Filament - 1kg Spool - Dimensional Accuracy +/- 0.05mm - Professional Grade 3D Printing Filament - Made in USA

  • PLA Plastic (Polylactic Acid) - a eco-friendly polymer which is harder than ABS, and melts at a lower temperature.
  • Amount: 1kg (2.2lbs) of Filament Per Spool.
  • Filament Diameter: 2.85mm (Dimensional Accuracy +/- 0.05mm).
  • Recommended Nozzle Temperature: 200 - 240C - Depending on type of 3D printer, printing speed, and ambient conditions.
  • Compatibility: Works with all 2.85mm 3D printers including Makerbot, Afinia, Lulzbot, Flashforge, Solidoodle, 3D Doodler (pen), Mbot, and Type A.
Check Stock

SpringSpray 1-1/2\ NST/ NH Fire Hose Nozzle Brass Fire Equipment Heavy Duty Industrial Fog Nozzle

  • ✅ EXACT SIZE - 1-1/2" (38 mm) adjustable fog nozzle. Female 1-1/2" NH/NST will only connect to a male 1-1/2" NH/NST. IDM of 1.5" NST/NH nozzle is 1.8585" and conforms to NFPA 1963 Standard for Fire Hose Connections 2014 Edition. If you need 1-1/2" NPSH nozzle, this 1-1/2" NH/NST nozzle will be too big for your hose. Please check the thread of your hose before order.
  • ✅ MULTIPURPOSE APPLICATION - Recommended for fire hose and fire hose racks for lined or unlined fire hose. This fire nozzle is for attaching to a fire hose and for extinguishing fires. This spray nozzle is for fire fighter fireman station, also could be for green house applications, dust suppression, and evaporate cooling.
  • ✅ PREMIUM MATERIAL - Brass housing and brass stem, brass material for resistance to high temperature and impact, and for resistance to corrosion. Excellent watering equipment. 1-1/2" cast brass adjustable fog nozzle.
  • ✅ EASY TO CONTROL - By rotating to control on and off and adjust spray size, adjusts from straight stream to fog for multipurpose use. Industrial constant flow fog nozzle. Approximate gallons per minute (GPM) - 85. Maximum 100 psi pressure (water only). Provides consistent volume at any spray angle. Capable of complete shutoff, straight stream or any d....
Check Stock

uxcell 1/2\ PT Thread Flat Nozzle Flexible Plastic Water Oil Coolant Pipe Hose

Check Stock

SpringSpray 1-1/2\ NST/NH Fire Hose Nozzle Brass Fire Equipment Heavy Duty Industrial Jet Fog Spray Nozzle

  • ✅ EXACT SIZE - 1-1/2" (38 mm) adjustable fog nozzle. Female 1-1/2" NH/NST will only connect to a male 1-1/2" NH/NST. IDM of 1.5" NST/NH nozzle is 1.8585" and conforms to NFPA 1963 Standard for Fire Hose Connections 2014 Edition. If you need 1-1/2" NPSH nozzle, this 1-1/2" NH/NST nozzle will be too big for your hose. Please check the thread of your hose before order.
  • ✅ MULTIPURPOSE APPLICATION - Recommended for fire hose and fire hose racks for lined or unlined fire hose. This fire nozzle is for attaching to a fire hose and for extinguishing fires. This spray nozzle is for fire fighter fireman station, also could be for green house applications, dust suppression, and evaporate cooling.
  • ✅ PREMIUM MATERIAL - Brass housing and brass stem, brass material for resistance to high temperature and impact, and for resistance to corrosion. Excellent watering equipment. 1-1/2" cast brass adjustable fog nozzle.
  • ✅ EASY TO CONTROL - By rotating to control on and off and adjust spray size, adjusts from straight stream to fog for multipurpose use. Industrial constant flow fog nozzle. Approximate gallons per minute (GPM) - 85. Maximum 100 psi pressure (water only). Provides consistent volume at any spray angle. Capable of complete shutoff, straight stream or any d....
Check Stock

Gizmo Dorks Low Odor ABS 3D Printer Filament 3mm (2.85mm) 1kg, Sky Blue

  • Uniquely formulated to be virtually smell free while 3D printing.
  • Low odor ABS prints are high in strength and durability while providing for maximum impact resistance..
  • 200 gram net weight is the perfect sample size to try out filament.
  • Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter.
  • the net weight of the filament is 1 kg which is 2.2 pounds.
Check Stock

Msunlord TPE 3D Printer Filament, 95A TPE 2.85mm (Accuracy +/- 0.05mm) Flexible 3D Printing Filament, 0.95Kg Spool, Blue for 3D Printers or 3D Pens

  • 0.95Kg 2.85mm TPE(Thermoplastic polyurethanes)3D printer filament.
  • Recommended Extrusion/Nozzle Temp: 200°C - 220°C (392℉~ 428℉),Heated Bed Temp: 60°C - 80°C (140℉~ 176℉).
  • Design and manufactured in compliance with the requirements of EU REACH, RoHS. Eco-friendly, non-toxic, harmless..
  • HIGH PERFORMANCE: Low-Odor, Low-Warp, good tensile strength and ductility. Much more strong than PLA, ABS printer filament in toughness..
  • WIDELY COMPATIBLE: Compatible with 3D printers and 3D pens that use 2.85mm filament, fit for almost all popular brand 3D printers on market..
Check Stock

Gizmo Dorks PLA Filament for 3D Printers 3mm (2.85mm) 5kg, Black

  • PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant.
  • Recommended Nozzle Temperature: 190 - 225 C.
  • 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm).
  • Net weight: 5kg / Spool Diameter: 11.75" / Spool Width: 6.25" / Spool Hub Diameter: 1.25".
  • PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more!.
Check Stock

Gizmo Dorks Hips Filament for 3D Printers 3mm (2.85mm) 200g, Grey

  • HIPS (High Impact Polystyrene) 3D printer filament vacuumed sealed with desiccant.
  • Extrusion nozzle temperature: 225 - 250 C.
  • Recommended to use a heated build platform.
  • 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm).
  • Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5".
  • HIPS filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more!.
Check Stock