Reviews 90mm Nozzle

G830 2.0 Gelcoat Spray Gun

  • 【COMPOSITION STRUCTURE】1 x Spray Gun (gun trigger, air flow control valve, housing, spring hook).
  • 1 x 4mm Spray Nozzle FN5 5/32" (with sealing ring).
  • 2 x 1000ml Plastic Cup (with metal cup cover).
  • 【MAIN PARAMETERS】Air source pressure: 0.3-0.6Mpa, Cup volume: 1L, Measuring Cup: 500ml, Spray Nozzle: (4mm) FN5 5/32", Nozzle outer diameter: 5.0, Nozzle inner diameter: 3.0, Package size: 23cm x 23cm x 17cm (9'' x 9'' x 6''), Shipping weight: 1.4kg/3lbs..
  • 【OPERATION METHOD】According to the viscosity of the gel coat, choose the nozzle with the right diameter. In the nozzle and jet, the gun and the gun body and the lid and the material apply grease to the joints such as the cup. Then cover the cup on the cup filled with the material and press the lid.
  • Force the nozzleinto the air vent in front of the gun until the nozzle shows the air vent.
  • Hold thehandle and hold the gun. The air is ejected from the air jet..
  • 【WIDE APPLICATION】This gun will spray faster than conventional HVLP guns and will clean up in just a few minutes.This gun is used for spraying not only gelcoat, but other materials such as parting films, spray gypsum, tooling gelcoats, sandable primers, granite enhanced gelcoats, adhesives and paints..
Check Stock

Big Autoparts 1000cc Aluminum Cup with Gauge Air Spray Gun,HVLP Gravity Feed Air Spray Gun,1.4mm & 1.7mm & 2.5mm Replaceable Nozzles,Suitable with Auto Paint, Primer, Clear/Top Coat & Touch-Up

  • 1x True Micrometer Air Regulator with Gauge.
  • HVLP gravity feed spray gun fast and accurate equal atomization and particle size for all kinds of surface painting.Max pressure 90 psi and 1.4mm 1.7mm, 2.5mm Replaceable nozzle apply for automotive for base coats, clear coats, single stage, primers, door, trim, as well as house paint or other applications..
  • Paint gun nozzle is made of high purity brass to create 10 holes, the atomization is more delicate and the area is larger.Each air spray gun is equipped with a fine nozzle size that is perfect for applcations and projects around the house..
  • Primer gun spray medium viscosity paint coating materials, such as high build or polyester primers, thick enamels, latex paints, chip guard, metal flakes, gel coats, liquid mask, etc..
  • Each primer paint gun control knobs for full adjustment over spray pattern, fluid control and air pressure..
Check Stock

3D BEST Q Carbon Fiber Polycarbonate 1.75mm 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1KG Spool, Really Carbon Fiber-infill，Black

  • Weight: 1 KG (approximately 2.20 lbs) Spool, 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature: 240°C - 270°C Base Plate/Print Bed Temperature:90~110°C.
  • Attention please: Clean the nozzle before printing OR just use a 0.5mm or above nozzle to avoid clog..
  • The printed workpiece is frosted surface and almost impervious to light.
Check Stock

Le Lematec AS118 Black Sandblaster and Sandblaster Long Nozzle Attachment Bundle

  • Heavy-duty AS118 Black sandblaster kit with long nozzle attachment combo for spot sandblasting and detailing. Bring this bundle to any workshop or garage for quality and reliable performance to achieve quality results..
  • The AS118 Sandblaster is the perfect tool for any job. This gun kit removes rust, paint, and cleans all sorts of surfaces - from wheels to BBQ grills! It can even etch glass with ease. One Tool Many Jobs. Operating between 90-150 PSI, these guns give you the flexibility to work with a variety of materials..
  • Restore parts and objects fast with this long nozzle sandblasting tip for spot and detail blasting. Remove rust, dirt, and grime on target areas with minimal media waste. Long replacement nozzle for precise sandblasting: Inner diameter 5.3 mm, Outer diameter 8 mm, Length of tube 16.5 cm..
  • Perfect bundle for any blasting lets you configure nozzle attachments according to your blasting preference..
  • Add more power and flexibility to your sandblaster with the long nozzle attachment..
Check Stock

Le Lematec AS118-2C Premium Sandblaster and Sandblaster Long Nozzle Attachment Bundle

  • Heavy-duty AS118-2C Gravity and Siphon Feed sandblaster kit with long nozzle attachment combo for spot sandblasting and detailing. Bring this bundle to any workshop or garage for quality and reliable performance to achieve quality results..
  • "The AS118-2C Premium Sandblaster Gun Kit operates at 90 PSI-150 PSI and Air flow of 12 CFM at 100 PSI. The Sandblaster features a media compartment that supports most blasting materials from aluminum oxide to coal slag and much more. The AS118-2 Sandblaster Gun Kit features siphon function with 2 control regulators making larger projects a breeze.".
  • Restore parts and objects fast with this long nozzle sandblasting tip for spot and detail blasting. Remove rust, dirt, and grime on target areas with minimal media waste. Long replacement nozzle for precise sandblasting: Inner diameter 5.3 mm, Outer diameter 8 mm, Length of tube 16.5 cm..
  • Perfect bundle for any blasting lets you configure nozzle attachments according to your blasting preference..
  • Add more power and flexibility to your sandblaster with the long nozzle attachment..
Check Stock

MJJC Foam Lance 1/4 Quick Connect Foam Cannon with One Quarter Quick Connection Foam Gun Quick Connector also Fit for Karcher K1700 K1800 Pro

  • We - Tucool Racing has already enrolled brand MJJC, and have been assigned the role of Administrator in Brand MJJC.
  • THIS MODEL IS ALSO FIT FOR KARCHER K1700/K1800.
  • The product has been updated, the package come as shows in the photo, which according to our Amazon listing, please do not compare with other sites or....
  • Note: 1.25mm orifice nozzle, working with as low as 90 Bar (1300psi) pressure washers. If you want to replace on the 1.1mm orifice nozzle, make sure....
Check Stock

ZIRO PLA Marble Filament 1.75mm,3D Printer Filament PLA 1.75mm Marble Color 1KG(2.2lbs),Marble

  • Recommended Extrusion/Nozzle Temperature 190-220℃, Heat bed 50-60℃, Print Speed 30-90mm/s.
  • Dimensional Accuracy and Consistency, Diameter tolerance at +/-0.03mm, Net weight 1kg (2.2lbs) filament.
  • Printed objects look like Marble texture. A nozzle size of 0.4mm or larger is suggested..
  • Vacuum sealed with desiccant. Bonus - an extra reseal bag for storing used filament and a notecard.
  • After-sales service: Find us from the card, any question will be provided with a satisfactory solution.
Check Stock

Gel Coat Spray Gun Gelcoat Dump Gel Coat Sprayer Air Spray Gun Painting Tool Kit for DIY Home Fiberglass Spraying Coating Tool 0.3-0.6Mpa with Spray Nozzles

  • 【COMPOSITION STRUCTURE】1 x Spray Gun (gun trigger, air flow control valve, housing, spring hook).
  • 1 x 4mm Spray Nozzle FN5 5/32" (with sealing ring).
  • 2 x 1000ml Plastic Cup (with metal cup cover).
  • 【MAIN PARAMETERS】Air source pressure: 0.3-0.6Mpa, Cup volume: 1L, Measuring Cup: 500ml, Spray Nozzle: (4mm) FN5 5/32", Nozzle outer diameter: 5.0, Nozzle inner diameter: 3.0, Package size: 23cm x 23cm x 17cm (9'' x 9'' x 6''), Shipping weight: 1.4kg/3lbs..
  • 【OPERATION METHOD】According to the viscosity of the gel coat, choose the nozzle with the right diameter. In the nozzle and jet, the gun and the gun body and the lid and the material apply grease to the joints such as the cup. Then cover the cup on the cup filled with the material and press the lid.
  • Force the nozzleinto the air vent in front of the gun until the nozzle shows the air vent.
  • Hold thehandle and hold the gun. The air is ejected from the air jet..
  • 【WIDE APPLICATION】This gun will spray faster than conventional HVLP guns and will clean up in just a few minutes.This gun is used for spraying not only gelcoat, but other ma....
Check Stock

MENSI Brass Propane Gas Jet Nozzle Sprayer 1.96mm Orifice（0.0772'） with 3/8' Male Flare and M10x1.5mm Thread for Burner Inlet for Fire Pits, 2 Pack

  • ❤ 2 Pack of Nozzle used for propane fire pit, fireplace burner.
  • ❤ The thread to hook the burner inlet is M10 x 1.5mm..
  • ❤ The nozzle is great for GARDENSUN, WONDERFIRE Propane Fire Pit Made In China with 90 degree inlet tube type burner..
  • ❤ Made of 100% Solid Brass with 1.96mm(0.0772") Jet nozzle.
  • ❤ This replacement parts is great for your DIY propane firepit or replace defect nozzles..
Check Stock

KINLUOT PETG Filament 1.75mm 3D Printer Filament, Easy to Print, Dimensional Accuracy +/- 0.03 mm, 1kg Cardboard Spool (2.2lbs), Fit Most FDM Printer (Gray)

  • 【High Toughness and Purity Material】KINLUOT PETG 3D filament has the advantages of high toughness and purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects..
  • 【Premium PETG Filament】These Tough KINLUOT PETG Filaments to be Strict Tolerances. Diameter 1.75mm, Dimensional Accuracy + / – 0.03 mm, 1 KG Spool (2.2lbs)..
  • 【Clog&Bubble-Free】Completely dried for 24 hours before packaging, And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle..
  • 【Wide Compatibility】Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed. Works and Harmonizes Perfectly with all Common 1.75mm FDM 3D Printers..
  • 【Printing Tips】Net Weight：1kg(2.2lbs)，Total length：320（±10m），Nozzle Temp：230~250℃ (446℉~ 482℉)，Bed Temp：80~90℃ (176℉~ 194℉)，Printing Speed：30~60mm/s..
Check Stock