Reviews 215mm Nozzle
Geeetech PLA 3D Printer Filament, 1kg Spool (2.2lbs), 1.75mm Dimensional Accuracy +/- 0.03mm, Silver
- ✔️【Dimensional Accuracy & Consistency】– GEETECH PLA has strict tolerances. Diameter 1.75mm, dimensional accuracy +/- 0.03mm without any exaggeration. It works and harmonizes perfectly with all common 1.75mm FDM 3D printers..
- ✔️【1kg (2.2lbs) Spool】–Pack of 1 1kg/(2.2lbs) Silver Color pla. Spool size: Φ200mm/7.9" flange, Φ56mm/2.2" hub hole, 64mm/2.5" width. Reel is suitable for most trendy printers, Comgrow, Geeetech, Longer, LABISTS, ANYCUBIC.etc.
- ✔️【Easy-to-Use, Clog-Free, Bubble-Free】– Recommended extrusion/nozzle temperature 185°C - 215°C (365°F - 419°F), hot bed 25°C - 60°C (77℉~ 140℉) . Works perfectly with all common 1.75mm FDM 3D printers..
- ✔️【Vacuum Packing】– Vacuum sealed with desiccant to maintain low level of moisture content. And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle.Note: an extra sealed bag is offered to store filament..
- ✔️【100% Satisfaction Warranty】GEEETECH provides 100% Satisfaction Guarantee. If you are not satisfied with this filament, please kindly contact us at ANY TIME..
Check StockPurple PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockRed PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockIce White PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool has an ID=2-3/8″, OD=8″, and is 2.5″ wide.
- Recommended Settings: Nozzle Temperature 195 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockNeon Green PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament…
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockMidnight Black PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockHoney Gold PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockPearly Silver PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockMetallic Gray PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament
- PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
- Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
- Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
- Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..
Check StockPLA 3D Printer Filament 1.75mm SUNLU PLA Filament Dimensional Accuracy +/- 0.02 mm 1 kg Spool PLA 1.75 Black
- 【1KG(2.2 lbs) Spool】Spool Diameter: 8.00"-Spool Width: 2.50"-Spool Hub Hole Diameter: 2.20". SUNLU Strong Coils Design Help Your 3D Printing More....
- 【1.75mm PLA Filament】SUNLU PLA 3D Printer Filament 1.75mm, PLA 1.75 Dimensional Accuracy +/- 0.02mm. No Pungent Smell in Printing, No Harm to User....
- 【Tangle Less & Clog-free & Bubble-Free】Full Mechanical Winding and Strict Manual Examination, Which Guarantee the SUNLU PLA filaments tidy and....
- 【High Compatibility】SUNLU PLA Filament Works Perfectly with Most FDM 3D Printers on the Market, Such as Ender 3, CR 6, A 8, CR 10, Maker Bot, Mono....
- 【Recommend Settings】PLA Filament Extrusion/Nozzle Temperature 215-230℃, Bed 70℃-80℃. SUNLU 3D Filament are the Most Common Used Filaments....
Check Stock