Reviews 80mm Nozzle - BestBuyersPro.com

SKD RV Tech 10pcs Brass Misting Nozzles, 1/4 Inch Mister Nozzles Thread Misting Nozzle Tees for Outdoor Misting Cooling System Replacment.Misting Parts & Accessories

It only uses one half gallon per hour per nozzle..
Thread size: 4mm(diameter)*5mm(length) , 3/16" pitch. Note : this is a high Pressure mist nozzle , the Pressure is 20-80kg/cm.
features a sturdy brass body with stainless steel orifice.
Soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.

Brass / SS 0.023 inches (0.6 mm) orifice, screw Into any 10/24-threaded mist nozzle opening.
High Quality: made of brass, never rust. the bras nozzle is the best choice for outdoor use with cold water.
Operation Pressure: 20-70kg/cm, flow Rate: 80-145ml/min.
Minimal water use of 1/2 gallon of water per hour per mist nozzle.
Leak-proof, self-sealing o-ring included with each brass nozzle.

Operation Pressure:4-70kg/cm (60-995 psi) flow rate:80-145l/min (21-38gpm)..
Save Water: Minimal water use of 1/2 gallon of water per hour per nozzle, which fits for low pressure mister system..
Package Quantity: 50Pack. The orifice of these mister nozzles is 0.012 inch/0.3 mm. Screw into any 10/24-threaded mist nozzle opening..
High Quality & Leak Proof: These misting nozzles made of brass, never rust. Best choice for outdoor use with cold water. Each nozzle is equipped with a leak proof O-ring, so no tape or sealant is required..
Wide Application: The brass misting nozzle is widely applied to outdoor cooling system, agriculture irrigation system, green house, landscaping, small fountain, etc..

22 Pcs Brass Misting Nozzles For Outdoor Cooling System, Greenhouse, Landscaping and Dust Control.This type of nozzle is applied in the low pressure.
This misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage.
It is used a sturdy brass body with stainless steel orifice,Use of precision nozzle keypunch, sophisticated production,strong durability.
Operation Pressure:20-70kg/Cm .Flow Rate:80-145l/Min (21-38GPM).Minimal Water Use Of 1/2 GPH Per Nozzle.
Thread size:10-24 UNC，Orifice：0.008" (0.2 mm).

The package will include 20pcs of Electrode, 20pcs of Tip and 2pcs of Drag Shield Cap.
There are 42 pieces plasma cutting torch consumables in the package, Electrode (KP2063-1B1), Tip/Nozzle(KP2062-3B1) and Drag Shield Cup(KP2065-1).
The electrodes, tips and other consumables are fitting in Lincoln PRO-CUT 55/80 plasma cutting torch, not PRO-CUT 25 Plasma Cutting Torch, or PCT20/80 Plasma Cutting Torch.
The diameter or this KP2062-3B1 Tip or Nozzle is 1.3mm or 0.053'', it also lack vortex / swirl device.
All the plasma cutter torch consumables are aftermarket kits and replacement parts, NOT Brand or Original.

Elite Airbrush Nozzle Set Design(Screw out or on by hand).
3 sizes of screw on gravity fluid cups: 2ml, 5ml and 13ml.
3 different size of nozzle: 0.30mm, 0.50mm(Mounted) and the 0.80mm.
Sprays light to highly viscous coating materials while ensuring a high flow of color with a different spray pattern.
Great for Fine Art, Nail Art, Temporary Tattoos, Cake Decorating, Hobbies, Crafts, Car Graphics, etc. Please note that the airbrush needs air compressor to get to work..

【High Toughness and Purity Material】KINLUOT PETG 3D filament has the advantages of high toughness and purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects..
【Premium PETG Filament】These Tough KINLUOT PETG Filaments to be Strict Tolerances. Diameter 1.75mm, Dimensional Accuracy + / – 0.03 mm, 1 KG Spool (2.2lbs)..
【Clog&Bubble-Free】Completely dried for 24 hours before packaging, And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle..
【Wide Compatibility】Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed. Works and Harmonizes Perfectly with all Common 1.75mm FDM 3D Printers..
【Printing Tips】Net Weight：1kg(2.2lbs)，Total length：320（±10m），Nozzle Temp：230~250℃ (446℉~ 482℉)，Bed Temp：80~90℃ (176℉~ 194℉)，Printing Speed：30~60mm/s..

【High Toughness and Purity Material】KINLUOT PETG 3D filament has the advantages of high toughness and purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects..
【Premium PETG Filament】These Tough KINLUOT PETG Filaments to be Strict Tolerances. Diameter 1.75mm, Dimensional Accuracy + / - 0.03 mm, 1 KG Spool (2.2lbs)..
【Clog&Bubble-Free】Completely dried for 24 hours before packaging, And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle..
【Wide Compatibility】Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed. Works and Harmonizes Perfectly with all Common 1.75mm FDM 3D Printers..
【Printing Tips】Net Weight：1kg(2.2lbs)，Total length：320（±10m），Nozzle Temp：230~250℃ (446℉~ 482℉)，Bed Temp：80~90℃ (176℉~ 194℉)，Printing Speed：30~60mm/s..

Material: PET (Polyethylene Terephthalate) inner container & metal shell,lightweight and durable aluminum material makes it ideal for placing in your handbag or pocket.
Package included:6pcs perfume spray bottles（Blue/Silver/Rose Pink/Red/Green/Gold）.
How To Use:Before the bottom filling bottle is filled with liquid, please open the lid, spray several times according to the nozzle, discharging the gas in the bottle,insert the nozzle of your perfume bottle into valve at the base of atomizer,after filling, spray a few times to accelerate the closure of filling port. Don’t be too full, just fill a little bit above the window.