Reviews 70mm Nozzle

KUWAN 30pcs Brass Misting Nozzles for Cooling System 0.023\ (0.6 mm) 10/24 UNC Garden (0.023)

  • Brass / SS 0.023 inches (0.6 mm) orifice, screw Into any 10/24-threaded mist nozzle opening.
  • High Quality: made of brass, never rust. the bras nozzle is the best choice for outdoor use with cold water.
  • Operation Pressure: 20-70kg/cm, flow Rate: 80-145ml/min.
  • Minimal water use of 1/2 gallon of water per hour per mist nozzle.
  • Leak-proof, self-sealing o-ring included with each brass nozzle.
Check Stock

50PCS Brass Misting Nozzles for Outdoor Cooling System 0.012' Orifice (0.3 mm) 10/24 UNC

  • Operation Pressure:4-70kg/cm (60-995 psi) flow rate:80-145l/min (21-38gpm)..
  • Save Water: Minimal water use of 1/2 gallon of water per hour per nozzle, which fits for low pressure mister system..
  • Package Quantity: 50Pack. The orifice of these mister nozzles is 0.012 inch/0.3 mm. Screw into any 10/24-threaded mist nozzle opening..
  • High Quality & Leak Proof: These misting nozzles made of brass, never rust. Best choice for outdoor use with cold water. Each nozzle is equipped with a leak proof O-ring, so no tape or sealant is required..
  • Wide Application: The brass misting nozzle is widely applied to outdoor cooling system, agriculture irrigation system, green house, landscaping, small fountain, etc..
Check Stock

RuoFeng Mister Nozzles Brass For Outdoor Cooling System Low-Pressure Atomizer 22 pcs Orifice 0.008\ (0.2 mm) 10-24 UNC

  • 22 Pcs Brass Misting Nozzles For Outdoor Cooling System, Greenhouse, Landscaping and Dust Control.This type of nozzle is applied in the low pressure.
  • This misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage.
  • It is used a sturdy brass body with stainless steel orifice,Use of precision nozzle keypunch, sophisticated production,strong durability.
  • Operation Pressure:20-70kg/Cm .Flow Rate:80-145l/Min (21-38GPM).Minimal Water Use Of 1/2 GPH Per Nozzle.
  • Thread size:10-24 UNC，Orifice：0.008" (0.2 mm).
Check Stock

homenote 10 Pack Brass Misting Nozzles for Outdoor Misting Cooling System, Suit for 1/4” Tubing

  • Quantity: 40PCS Brass Misting Nozzles For Outdoor Cooling System.
  • The misting nozzle is made of a sturdy brass with stainless steel orifice.
  • Operation Pressure:20-70kg/Cm. Flow Rate:80-145ml/Min..
  • Minimal Water Use Of 1/2 Gallon Of Water Per Hour Per Nozzle..
Check Stock

WuYan 4pcs Replacement Periodontal Pocket Tips for Waterpik WP-60 WP-70E Water Flosser

  • ✔ Effective removal of oral odor.Extra gentle cleaning for around Implants, bridges, and crowns..
  • ✔ Small investment, Peak performance - We recommend changing your handle Assembly Kit and water tips every 3 months to maintain your irrigator maximum performance..
  • ✔ Ultra-fine soft nozzle that removes periodontal pockets from 6-7mm under the gums at the lowest pressure..
  • ✔ Compatible with: Waterpik WP-70E, WP-60.
  • ✔ Package includes 4pcs nozzle for Waterpik..
Check Stock

WuYan 2pcs Replacement Periodontal Pocket Tips for Waterpik WP-60 WP-70E Water Flosser

  • ✔ Effective removal of oral odor.Extra gentle cleaning for around Implants, bridges, and crowns..
  • ✔ Small investment, Peak performance - We recommend changing your handle Assembly Kit and water tips every 3 months to maintain your irrigator maximum performance..
  • ✔ Ultra-fine soft nozzle that removes periodontal pockets from 6-7mm under the gums at the lowest pressure..
  • ✔ Compatible with: Waterpik WP-70E, WP-60.
  • ✔ Package includes 2pcs nozzle for Waterpik..
Check Stock

Parts-Diyer 1.45 Gallon Drywall Texture Sprayer Hopper Spray Gun for Wall Ceiling Automotive

  • [Recommended Pressure] - 4-6 CFM/50-70 PSI.
  • [Material] - Aluminium alloy spray gun and plastic hopper.
  • [Item Features] - Versatile spray gun will upgrade the quality of your drywall, stucco, or even pool deck sealant.
Check Stock

1 .45 Gallon Air Hopper Spray Guns Paint Texture Drywall Wall Painting Sprayer With3 Nozzles 1

  • Recommended pressure: 4-6 CFM/50-70 PSI, Cup size: 1.45 gallon.
  • Nozzle Size: 4mm (Medium Viscosity Materials)； 6mm (Medium Viscosity Materials)；8mm (High Viscosity Materials).
  • A handle on the cup makes it easy to use.
  • Easy pull swing trigger makes greater control.
  • Perfect performance with adjustable material control.
Check Stock

Stronghero3D PETG 3D Printer Filament 1.75mm Carbon Fiber 1kg

  • PETG with carbon fiber powder infill not long fiber, strength better normal PETG , strong and tough,colour is black.
  • Nozzle temp,220-230 degree, hotbed 70 degree, speed 25mm/s,retraction length 4mm, retraction speed 50mm/s,.
  • 1kg/Spool,Vacuumed Sealed With Desiccant inside,then in small box. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)..
  • Strong layer adhesion Hardly shrinking 0.2-0.5%, barely warping Tough and break resistant: Strength 105R,Slight gloss in finish,Resistant to acids and....
  • We make each roll and each point been inspection qualify,hard quality control.
Check Stock

IIYL Oral Hygiene Accessories Water Hose Plastic Handle Compatible for Waterpik Oral Irrigator Wp-100 WP-900, Pack of 1 Handle/Hose

  • ✔ Effective removal of oral odor.Extra gentle cleaning for around Implants, bridges, and crowns..
  • ✔ Small investment, Peak performance - We recommend changing your handle Assembly Kit and water tips every 3 months to maintain your irrigator maximum performance..
  • ✔ Ultra-fine soft nozzle that removes periodontal pockets from 6-7mm under the gums at the lowest pressure..
  • ✔ Compatible with: Waterpik WP-70E, WP-60.
  • ✔ Package includes 4pcs nozzle for Waterpik..
Check Stock