Reviews 60mm Nozzle

Huanyu Single-Pump Electric Desoldering Gun Desolder 100W Lead-free Soldering Tin Gun Vacuum Pump Solder Sucker Soldering Welding Tool for DIY Electronic Repair Work (110V Model, S-993A Single-pump)

  • 【100W Constant Temperature Heating Core】Constant temperature working model, instantaneous temperature recovery function & fast heating function, heating up to 350 °C for 60 seconds..
  • 【Enhanced Vacuum Dual Pump】Strong suction power, easy remove tin and easy operation. NOTE:Suction nozzle:Default φ1.0mm nozzle. φ1.5mm and φ2.0mm nozzles are optional, please contact us if you need..
  • 【Ceramic Heating Core】Makes heating performance better and facilitates recovery of heat from suction nozzle. NOTE:Suction nozzle:Default φ1.0mm nozzle. φ1.5mm and φ2.0mm nozzles are optional, please contact us if you need..
  • 【Anti-static Design 】prevents circuit boards and electronic components to damage due to static electricity and electrical leakage..
  • 【Detachable Transparent Rear Cover】the air pump can see easily duing it work, and easy to clearn..
Check Stock

YingEnter Professional Plastic Hair Dryer Nozzle Diffuser Hair Dryer Nozzle Comb Attachment Concentrator Replacement Blow Flat Hairdressing Salon Styling Tools,Type A

  • [Package]: You'll get 2 pcs Black Plastic Hair Dryer Narrow Concentrator Nozzle, One size: 50x60x68 mm/1.96x2.44x2.67 inch The other size: 50x74x75 mm/1.96x2.91x2.95 inch.
  • [High temperature resistant nylon material]: Our hair Dryer Narrow Concentrator Nozzle is made of high temperature resistant nylon material, high temperature, deformation. It can work well under 150 degrees for a short time.
  • [Good experience]: With the influence of the nozzles, it can help the air flow gather and disperse, reduce impact for your hair. If your hair dryer diameter below 4.5cm, please use with sponge rubber pad together. New black high-temperature resistant plastic black Hair Dryer Nozzle can make your hair drier lighter, more durable, and more powerful..
  • [Easy install]: Take off the old air nozzle and put the new air nozzle on the air outlet of the hair dryer, you'll get it.
  • [warm Tip]: The following three situations cannot be used: 1. Diameter is less than 42mm ,or more than 46mm 2.Metal material hair dryer cannot use 3.Foadable hair dryer cannot use it.
Check Stock

C.A. TECHNOLOGIES/C.A.T. 60-TRBN-2 HVLP Turbine Gun w/Cup

  • The 60-TRBN-2 HVLP Turbine spray gun is a non-bleeder type that provides excellent atomization for controlled results..
  • The universal air inlet fitting makes this an easy replacement for all units..
  • Comes standard with a 1.3 mm Needle/Nozzle Set.
  • Full Range of Nozzle/Needle Combinations (0.5 mm - 2.5 mm setups) "sold separately".
Check Stock

Tool Daily Short Pressure Washer Gun with Foam Cannon, 1/4 Inch Quick Connector, with 5 Pressure Washer Nozzle Tips, 1 Liter

  • ...de diameter, please connect the gun to hose directly. If hose has M22 15mm fitting with 15mm inside diameter, please connect the brass coupler to gun and hose..
  • Adjustable Snow Foam Lance with 1/4" quick disconnection fitting. Container Capacity: 1 Liter / 0.22 Gallon. Specification: 1000 PSI to 3000 PSI. Adjustable nozzle for accurate mixing and foam generation. Turn the top knob right (-) to get the thickest mixture, adjust the nozzle to get a proper sprinkle pattern, and let it loose..
  • 5 Nozzle Tips have different angle (0, 15, 25, 40, 65 degree). Choose different nozzle according to the actual need. Such as watering flowers and plants, washing car. They also can be attached to a Quick-Connect Wand for swifter application and more..
  • Application: ideal for Motorcycle, Car Washing.
  • floors, Windows washing, it is best product for Detailing Trucks or SUVs..
Check Stock

Creality 3D Hardened Steel MK8 Nozzle with High Temperature Resistance Upgraded Tungsten All Metal Nozzle Ends for Makerbot Ender 3 / Ender 3 S1, CR-10 Series, 0.2/0.3/0.4/0.5/0.6 mm (5pcs in One Set)

  • [Super Durable Tungsten Material] MK8 extruder nozzles are made by paramount hardened tungsten steel, with long life use time than the normal brass nozzle. The hardness is over HRC60 can reduce the abrasion to the inner and outer of the nozzle during long time printing，more heat-resistant than ordinary brass nozzle，MK nozzles is harder than brass nozzles，which makes it durable accurate and compatible with more filaments..
  • [High Temperature Resistance ] The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible material from PLA,ABS to carbon fiber, even PEEK..
  • [High Precision] these 3D printer nozzles keep stable temperature during printing let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision.Not easy clog during printing, easy to clean. Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability and Compatibility] Our Creality Ender-3 S1 Nozzles suit to almost all FDM printer,could install to MK8 heating block. Our tungsten nozzles fit for 3D Printer Mak....
Check Stock

Creality 10 Packs 3D Printer Hardened Steel MK8 Nozzles, Upgraded Tungsten All Metal Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm for Creality Ender 3 Ender 3 V2 Ender 3 pro CR-10

  • [Super Durable Tungsten] - MK8 extruder nozzles are made by paramount hardened tungsten steel, with longer lasting time than the normal brass nozzle. The hardness is beyond HRC60, can reduce the abrasion to the inner and outer of the nozzle during long time printing, more heat-resistant and more durable than ordinary brass nozzle..
  • [Super High Temperature Resistance] - The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible with material such as PLA, ABS to carbon fiber, even PEEK..
  • [High Precision More Than Your Imagination] - Keep stable temperature during printing, let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision. Avoid clog during printing, easy to clean. Made with centering CNC precision automatic lathe and with one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability & Compatibility] - Our Creality Nozzles are compatible with almost all FDM printer, also fits for MK8 heating block. Our tungsten nozzles are also designed for 3D Printer Makerbot Creality Ender 3 series and CR-10 series 3D printer, MK....
Check Stock

Qtqgoitem Round Nozzle 1/2BSP Thread Flexible Oil Coolant Pipe Tube 60cm Long (Model: 4c0 87c 395 c03 724)

  • Nozzle Size : 40 x 10mm/ 1.6" x 0.4"(L*Tip Dia).
  • Overall Size : 60 x 2.6cm/ 23.6" x 1"(L*D).
  • Package Content : 1 x Flexible Coolant Pipe.
Check Stock

ZIRO PLA Marble Filament 1.75mm,3D Printer Filament PLA 1.75mm Marble Color 1KG(2.2lbs),Marble

  • Recommended Extrusion/Nozzle Temperature 190-220℃, Heat bed 50-60℃, Print Speed 30-90mm/s.
  • Dimensional Accuracy and Consistency, Diameter tolerance at +/-0.03mm, Net weight 1kg (2.2lbs) filament.
  • Printed objects look like Marble texture. A nozzle size of 0.4mm or larger is suggested..
  • Vacuum sealed with desiccant. Bonus - an extra reseal bag for storing used filament and a notecard.
  • After-sales service: Find us from the card, any question will be provided with a satisfactory solution.
Check Stock

Israel Popper Stopper Tolbert with The C.A Warren Players - Big Leg Woman With A Short Short Mini Skirt / I Got Love - 7 Vinyl 45 Record

  • The 60-TRBN-2 HVLP Turbine spray gun is a non-bleeder type that provides excellent atomization for controlled results..
  • The universal air inlet fitting makes this an easy replacement for all units..
  • Comes standard with a 1.3 mm Needle/Nozzle Set.
  • Full Range of Nozzle/Needle Combinations (0.5 mm - 2.5 mm setups) "sold separately".
Check Stock

50PCS Brass Misting Nozzles for Outdoor Cooling System 0.012' Orifice (0.3 mm) 10/24 UNC

  • Operation Pressure:4-70kg/cm (60-995 psi) flow rate:80-145l/min (21-38gpm)..
  • Save Water: Minimal water use of 1/2 gallon of water per hour per nozzle, which fits for low pressure mister system..
  • Package Quantity: 50Pack. The orifice of these mister nozzles is 0.012 inch/0.3 mm. Screw into any 10/24-threaded mist nozzle opening..
  • High Quality & Leak Proof: These misting nozzles made of brass, never rust. Best choice for outdoor use with cold water. Each nozzle is equipped with a leak proof O-ring, so no tape or sealant is required..
  • Wide Application: The brass misting nozzle is widely applied to outdoor cooling system, agriculture irrigation system, green house, landscaping, small fountain, etc..
Check Stock