Boost network connectivity with the Vivotek
Po EInjector! Say goodbye to power limitations and experience enhanced power delivery for efficient network performance.
Networking
PLUSPOE 2-Pack Wall PoE Injector 48V 24W Power Over Ethernet Adapter 802.3af for Security IP Camera, IP Voip Phones, AP and More,10/100Mbps
- Simplify installations with a multi-port midspan injector PoE adapter. Our 8 port PoE injector features 8 Data In (LAN) ports with 8 Data + Power Out (PoE) ports. Includes a compatible PoE injector 48V 60W power supply..
- Supply continuous Power over Ethernet for up to 8 passive 802.3af or 802.3at devices like VoIP phones, WiFi access points, IP cameras, and other low voltage devices. Always check manufacturer specifications for compatibility verification..
- PoE injector compatible with IEEE 802.3af or at devices. Mode B Negotiation delivers power on pins 4,5(+) / 7,8(-). Passive “Always On” power means all devices receive the same voltage (48v)..
- Plug and play. This midspan PoE injector is compatible with your 10/100 Mbps network switch or router, delivering Fast Ethernet standards with no loss of signal quality via 8 Data In ports and 8 Data + Power out ports..
- All of our PoE products are backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock
PoE Texas 24 Multi Port IEEE 802.3at PoE+ Injector - Gigabit Data Active Power Over Ethernet for High Powered Devices 30W PoE Injector for WiFi Access Point & More with 2X 56V 120W Power Supplies
- Power IP cameras, desktop phones, WiFi Access Points (WAPs) and more. This 802.3af/at compliant multi port PoE injector takes power from a DC source and adds it to a Cat5, Cat5e, or Cat6 ethernet cable to power your PoE Devices..
- Instantly upgrade your network gigabit switch to IEEE 802.3at PoE+. No need to purchase a larger 24 port switch. You can rely on your smaller, more cost-effective PoE switch and simply add Power + Data using the 802.3at PoE injector..
- Active PoE means the right power at the right time. An active PoE injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices..
- Plug and play. Our 24 port PoE adapter / injector transmits 10/100/1000 gigabit data, delivering lightning fast wired speeds with no loss of signal quality, up to 328 feet. Input voltage range: 48-56 Volts DC. 30 Watt output per port. Kit includes two 120 watt power supplies for a total budget of 240 watts..
- All of our PoE power injector products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check StockSophos APX 120 Indoor Access Point and 2YR Central Wireless Standard
- Sophos APX 320X Outdoor Access Point - 2x2 MIMO, dual radio, dual 5 GHz capable, 4 x external omni-directional antenna included, further sector and directional antenna options available for separate purchase. Includes mounting bracket and clamps for wall and/or pole mount. 5-Year warranty, no extended warranty available..
- Power adapter/PoE Injector not included, PoE Injector available for separate purchase. 11.5W max. power consumption (802.3af PoE Injector required)..
- NOTE: Management in Sophos Central only upon launch..
Check Stock
PoE Texas - PoE Injector - 12 Port Gigabit Passive Midspan Injector with 48V 120 Watt UL Power Supply - Power Over Ethernet for 802.3af or at PoE+ Devices VoIP Phone WiFi Access Point IP Camera
- Instantly upgrade your network to PoE+. Simplify installations with a multi-port midspan injector. This unmanaged midspan PoE injector features 12 PoE ports for simplified transmission of power + data..
- 10/100/1000 Gigabit Data capability with transparent VLAN passthrough. Power up to 12 IP cameras, desktop VoIP phones, or other low voltage devices. This passive PoE injector will always deliver the same voltage as its power supply..
- With available power and data delivery options for Mode A or Mode B compatible with IEEE 802.3af or at devices. PoE Texas offers other bundles with assorted power supplies to match your different device requirements..
- Includes 48 volt 120 watt UL approved power supply for a shared budget of 120 watts. A streamlined and cost-effective multi port solution with 12 x gigabit ports (Data In) and 12 x gigabit PoE ports (Data + PoE Out)..
- All of our PoE products are backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock
Gigabit PoE Splitter 12V 2A Output with IEEE 802.3af/at Standard Compliant 10,100,1000Mbps Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance 5.5×2.1mm DC Plug Cable(PS5712TG)
- Instantly add PoE to your network switch or router. This small, compact mountable PoE injector screws into the wall near an outlet or to the underside of desks, reducing clutter and offering versatility for your setup..
- Power IP security cameras, VoIP desktop phones, WiFi access points, and other devices that accept passive 802.3af using a data network cable and this passive Power over Ethernet adapter / single port injector..
- This midspan injector includes a UL certified 48 volt, 15 watt DC power supply to power devices labeled ‘802.3af’. Delivers power up to 328 ft from the injector site. Compatible PoE devices must have a wattage of 15w or less..
- Plug and play. Our single port PoE adapter transmits 10/100/1000 Gigabit data, delivering lightning fast wired speeds with no loss of signal quality via one Data In port and one Data + Power Out port..
- All of our PoE products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check StockTripp Lite Gigabit PoE+ Midspan Active Injector - IEEE 802.3at / 802.3af, 30W, 1 Port, Power Over Ethernet (NPOE-30W-1G),black
- ADDS POE DEVICES TO YOUR LAN WITHOUT A POE SWITCH: PoE+ injector uses existing Cat5e/6/6a cable to supply power to a PoE device connected to a non-PoE switch..
- EXPAND YOUR WIRELESS NETWORK: The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away..
- SAVES YOU TIME AND MONEY: This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don’t need to install new AC power lines and electrical outlets..
- SIMPLE PLUG-AND-PLAY: Quick and easy plug-and-play installation with no configuration necessary. Compact, hand-sized plastic housing ready for mounting on any smooth surface..
Check StockPoE Ethernet Power Supply 4 Port POE DC 12V-48V Power Adapter Injector for IP Camera 802.3af/802.3at Device
- Made of plastic material, sturdy and durable to use. Conform to international safety product standards and is safe to use..
- This PoE injector is compatible with IEEE802.3af/at network devices. Apply for IEEE802.3af/at standard POE powered devices.
- This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable.
- This device does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan..
- Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.Tip: the power voltage should not be over DC48V..
Check Stock
iCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps
- Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
- This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
- This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
- This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
- Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...
Check StockStarTech.com 4 Port Gigabit Midspan - PoE+ Injector - 802.3at and 802.3af - Wall-mountable Power over Ethernet Midspan (POEINJ4G)
- Deliver power and data to four PoE-powered devices(PD)using this wall-mountable PoE+ midspan hub.
- 4 Port Gigabit Power over Ethernet Midspan.
- Wall-mountable Power over Ethernet Injector.
- Delivers more power with up to 30w per port.
- Deliver power and data to four PoE-powered devices (PD) using this wall-mountable PoE+ midspan hub.
- Delivers more power with up to 30 w per port.
Check Stock
【Upgraded】LINOVISION POE Over Coax EOC Converter IP Over Coax Max 3000ft Power and Data Transmission Over Regular RG59 Coaxial Cable for Upgrading Analog Surveillance System to IP Surveillance System
- IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6, RG11 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver MUST be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
- 【POE & IP OVER TWIST PAIR CONVERTER】 Each pair of EOC(Ethernet over Coax) Converter is equipped with 2 BNC to Twist Pair connectors, which enables POE over Twist Pair transmission. 100Mbps bandwidth over 330ft regular twist pair cables while 10Mbps over 1485ft for both POE or NON-POE devices. It’s ideal for the CCTV system in elevator cart..
- 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight..
- 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connec....
Check Stock
IP Security 5.0MP H.265 POE PTZ Dome Camera, Hikvision Compatible 5X Optical Zoom, Indoor/Outdoor Network Camera with Audio, Pan 355° Tilt 90°,Waterproof IP66 98ft Night Vision, Motion Detection
- ... security camera provides you smooth Stream Video, 2.7-13.5mm 5X Motorized lens and a night-vision distance of up to 100ft. H.265 video compression features efficient video recording to save storage space while providing smoother video..
- 【Plug&Play with Hikvision NVR】No need power adapter, optional PoE switch or injector, easy plug&play with multiple 5MP PoE NVRs such as Hikvision, Laview, LTS, EZVIZ etc.And it also can work with Lorex and Dahua 5MP NVRs after enabled DHCP..
- 【IP66 Waterproof】The case is made of anti-explosion metal with brown color anti-explosion cover,IP66 waterproof Level. Built-in Surge and Lightning Protection Devices for Bad Weather..
- 【1 Year Warranty and Satisfy Guarantee】 This camera requires a separated POE injector,POE switch or POE NVR to operate. (Notice: Power supply and POE injector are NOT included). We Provider 1 year warranty for you. Also,we could provide SDK for our IP camera, if you need, please contact us for tech support..
Check Stock
XM1000pro
- 【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
- 【LONG REACH POE TRANSMISSION】Up to 100Mbps in 300m (1000ft) RG59 cable transmission, max 1000m (3000ft) distance in 10Mbps, working with CCA/CCU RG59/RG6 cable. Support POE power transmission with load capacity 11W over 300m (1000ft) transmission, working with POE IP camera, VoIP phone, POE WiFi AP.
- 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight.
- 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable.
- 【WORRY FREE】1 year warranty, US local technical support + Global after-hour support..
Check StockPoE Injector Adapter PoE+ Injector 30W 10/100/1000Mbps IEEE 802.3af/at Compliant Up to 100 Meters 325 Feet
- ❤ Converts A Non-PoE Gigabit Port To A Poe+ Gigabit Port And Network A Poe Device Located Up To 100 Meters (328 Ft.).
- ❤ Auto-Sensing Technology Delivers Up To 30w To An 802.3at PoE+ Device With Backwards Compatibility For 802.3af PoE (15.4w) Device.
- ❤ 1 Gigabit Ethernet Port Input and 1 PoE+ Gigabit Ethernet Port Output..
- ❤ Plug & Play, No Configuration Is Needed, Simply Connect A Poe Network Device, Accommodates Most Installations Scenarios..
- ❤ Compact and Cost-effective Gigabit PoE/PoE+ injector, IEEE 802.3af/802.3at Compliant.Please Identify the Seller ThePoEstore, the Quality of Other....
Check StockVivotek Poe Injector
Vivotek PoE Injector - the ultimate power delivery solution that ensures efficient network connectivity! 🚀
Here's what you need to know:
1. Power-packed Performance: The Vivotek PoE Injector is designed to provide enhanced power delivery for a seamless network experience. Say goodbye to slow connections and hello to lightning-fast internet speeds!
2. Easy Installation: With its user-friendly design, setting up the Vivotek PoE Injector is a breeze. Simply plug it in, connect your devices, and you're good to go. No complicated installations or tech-savvy skills required!
3. Reliable Power Supply: Don't let power outages disrupt your productivity. The Vivotek PoE Injector ensures a stable power supply to devices over Ethernet cables, guaranteeing uninterrupted connectivity and preventing any downtime.
4. Compatibility Galore: Worried about compatibility issues? Fret not! The Vivotek PoE Injector is designed to work seamlessly with a wide range of devices, including IP cameras, wireless access points, and IP phones. Whatever your network setup, this injector has got you covered!
5. Compact and Space-saving: Say goodbye to bulky power adapters cluttering up your workspace. The Vivotek PoE Injector's compact design saves valuable space, enabling you to optimize your work area and keep things neat and organized.
6. Cost-effective Solution: Why invest in expensive power adapters for each device when you can have the Vivotek PoE Injector? This cost-effective solution eliminates the need for multiple power sources, saving you both money and hassle.
7. Energy Efficient: The Vivotek PoE Injector is designed with energy efficiency in mind. By delivering power directly to devices over Ethernet cables, it reduces energy consumption and helps you go green without compromising on performance.
8. Enhanced Network Security: With the Vivotek PoE Injector, you can ensure a secure network environment. By eliminating the need for additional power outlets and adapters, there are fewer vulnerabilities for potential intrusions.
9. Flexibility at its Finest: Need to add or remove devices from your network? No problem! The Vivotek PoE Injector offers unparalleled flexibility, allowing you to easily expand or reconfigure your network without the hassle of dealing with power connections.
10. Future-proof Investment: Investing in the Vivotek PoE Injector means investing in the future. Its advanced technology and compatibility ensure that it will remain a valuable asset as your network evolves and grows.
11. Unbeatable Performance: Don't settle for average when you can have exceptional. The Vivotek PoE Injector delivers top-notch performance, enabling you to achieve optimal network efficiency and productivity.
12. Reviews Speak for Themselves: Our customers can't stop raving about the Vivotek PoE Injector! With 13 rave reviews and counting, it's clear that this injector is a game-changer when it comes to power delivery and network connectivity.
13. Competitive Comparison: We've done the research for you. Compare the Vivotek PoE Injector to other popular options on the market, and it's clear that this injector comes out on top in terms of performance, reliability, and value.
Upgrade your network connectivity with the Vivotek PoE Injector - the ultimate power delivery solution. Say goodbye to sluggish connections and hello to uninterrupted productivity. Get yours today and experience the difference! 💪 
