Reviews Ethernet Poe Injector

PoE Texas 24 Multi Port IEEE 802.3at PoE+ Injector - Gigabit Data Active Power Over Ethernet for High Powered Devices 30W PoE Injector for WiFi Access Point & More with 2X 56V 120W Power Supplies

  • Power IP cameras, desktop phones, WiFi Access Points (WAPs) and more. This 802.3af/at compliant multi port PoE injector takes power from a DC source and adds it to a Cat5, Cat5e, or Cat6 ethernet cable to power your PoE Devices..
  • Instantly upgrade your network gigabit switch to IEEE 802.3at PoE+. No need to purchase a larger 24 port switch. You can rely on your smaller, more cost-effective PoE switch and simply add Power + Data using the 802.3at PoE injector..
  • Active PoE means the right power at the right time. An active PoE injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices..
  • Plug and play. Our 24 port PoE adapter / injector transmits 10/100/1000 gigabit data, delivering lightning fast wired speeds with no loss of signal quality, up to 328 feet. Input voltage range: 48-56 Volts DC. 30 Watt output per port. Kit includes two 120 watt power supplies for a total budget of 240 watts..
  • All of our PoE power injector products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

PoE Injector Adapter PoE+ Injector 30W 10/100/1000Mbps IEEE 802.3af/at Compliant Up to 100 Meters 325 Feet

  • ❤ Converts A Non-PoE Gigabit Port To A Poe+ Gigabit Port And Network A Poe Device Located Up To 100 Meters (328 Ft.).
  • ❤ Auto-Sensing Technology Delivers Up To 30w To An 802.3at PoE+ Device With Backwards Compatibility For 802.3af PoE (15.4w) Device.
  • ❤ 1 Gigabit Ethernet Port Input and 1 PoE+ Gigabit Ethernet Port Output..
  • ❤ Plug & Play, No Configuration Is Needed, Simply Connect A Poe Network Device, Accommodates Most Installations Scenarios..
  • ❤ Compact and Cost-effective Gigabit PoE/PoE+ injector, IEEE 802.3af/802.3at Compliant.Please Identify the Seller ThePoEstore, the Quality of Other....
Check Stock

ThePoEstore 60W Gigabit PoE Injector Up to 60W Ultra Power Supply 10/100/1000Mbps IEEE 802.3at/802.3af Compliant Plug & Play

  • 1 CH Gigabit Ethernet port input and PoE+ Gigabit Ethernet port output offer full duplex 2Gbps Ethernet speeds..
  • Auto-sensing technology delivers up to 802.3at 60W to a PoE+ device with backwards compatibility for 802.3at(30w) and 802.3af PoE (15.4W) devices. Not....
  • Converts a non-PoE Gigabit port to a PoE+ Gigabit port and Network a PoE device located up to 100 meters (328 ft.) away..
  • Use PoE Injector with PD to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or....
  • LED power input indicators for and PoE output,Internal AC/DC converter no need for external power brick ,Easy plug-and-play installation..
Check Stock

Gigabit PoE Splitter 12V 2A Output with IEEE 802.3af/at Standard Compliant 10,100,1000Mbps Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance 5.5×2.1mm DC Plug Cable(PS5712TG)

  • Instantly add PoE to your network switch or router. This small, compact mountable PoE injector screws into the wall near an outlet or to the underside of desks, reducing clutter and offering versatility for your setup..
  • Power IP security cameras, VoIP desktop phones, WiFi access points, and other devices that accept passive 802.3af using a data network cable and this passive Power over Ethernet adapter / single port injector..
  • This midspan injector includes a UL certified 48 volt, 15 watt DC power supply to power devices labeled ‘802.3af’. Delivers power up to 328 ft from the injector site. Compatible PoE devices must have a wattage of 15w or less..
  • Plug and play. Our single port PoE adapter transmits 10/100/1000 Gigabit data, delivering lightning fast wired speeds with no loss of signal quality via one Data In port and one Data + Power Out port..
  • All of our PoE products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

PoE Ethernet Power Supply 4 Port POE DC 12V-48V Power Adapter Injector for IP Camera 802.3af/802.3at Device

  • Made of plastic material, sturdy and durable to use. Conform to international safety product standards and is safe to use..
  • This PoE injector is compatible with IEEE802.3af/at network devices. Apply for IEEE802.3af/at standard POE powered devices.
  • This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable.
  • This device does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan..
  • Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.Tip: the power voltage should not be over DC48V..
Check Stock

iCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps

  • Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
  • This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
  • This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
  • This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
  • Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...
Check Stock

Mikrotik OmniTIK 5 PoE ac 7.5dBi Gb Ethernet Ports Access Point Omni Antennas

  • OmniTIK 5 PoE ac also known as RBOmniTikPG-5HacD features five Gigabit Ethernet ports and support for 802.11ac.
  • It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE).
  • The OmniTIK 5 PoE ac comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.
  • It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
  • Size of RAM: 128 MB / CPU nominal frequency: 720 MHz / Storage size: 16 MB / Dimensions: 416 x 129 x 58 mm.
Check Stock

Mikrotik wAP 60Gx3 AP WLAN Access Point Power Over Ethernet (PoE) White

  • OmniTIK 5 PoE ac also known as RBOmniTikPG-5HacD features five Gigabit Ethernet ports and support for 802.11ac.
  • It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE).
  • The OmniTIK 5 PoE ac comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.
  • It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
  • Size of RAM: 128 MB / CPU nominal frequency: 720 MHz / Storage size: 16 MB / Dimensions: 416 x 129 x 58 mm.
Check Stock

Mikrotik RouterBoard mAP RBmAP2nD micro Access Point wireless Dual-Chain

  • The mAP also known as RBmAP2nD is a micro wireless Dual-Chain 2.4GHz Access Point with full RouterOS capabilities.
  • It is very portable, since it accepts power from a wide variety of sources - USB, Passive PoE and power jack.
  • The mAP also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.
  • 650MHz CPU, 64MB RAM, 2xEthernet, PoE out, Antenna 1.2dBi built in, Dimensions 68x68x19mm, Ethernet 2x 10/100 Mbit/s Ethernet with Auto-MDI/X.
  • Included parts: 24V 0.8A power adapter, microUSB type B to USB type A adapter.
Check Stock

PoE Texas 802.3af Power Over Ethernet PoE Splitter with 5 Volts 10 Watts Output - for 5V Non-PoE Security Camera and Devices Like Foscam Sonoff Tablet USB Dropcam Raspberry Pi and Others

  • 802.3af Power over Ethernet PoE Splitter / Converter for 5 volt non-PoE devices. Extend power up to 328 feet away from a PoE switch. Features....
  • 5v 10w PoE splitter compatible with non-PoE Security Cameras, Tablets, Raspberry Pi, Smart Home Devices, Foscam, Dropcam, Sonoff PTZ cam. The 1.35mm x....
  • This Power over Ethernet splitter converts and 'splits' 44-56v PoE into 5 volts, 10 watts of power on its DC barrel with divided 10/100/1000 gigabit....
  • Requires an IEEE 802.3af PoE switch or 802.3af PoE Injector (sold separately). Functions as a PoE splitter for 5v devices while delivering lightning....
  • All PoE Texas products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call....
Check Stock