Reviews Poe Hub Injector

PoE Texas 24 Multi Port PoE+ Injector with 48v 240w Power Supplies - 10/100/1000 Gigabit Passive Power Over Ethernet Means Versatility - 30W PoE Injector for WiFi Access Point PTZ Camera IP Phone

  • Save big on network upgrades and installations using this 24 port gigabit midspan PoE injector. Use it to power up to 24 IP cameras, desktop phones, WiFi Access Points, or other low voltage devices through a network data cable..
  • Instantly upgrade your network gigabit switch to PoE/PoE+. No need to purchase a larger 24 port switch. You can rely on your smaller, more cost-effective PoE switch and simply add Power + Data using the 802.3at PoE injector..
  • With this passive PoE Injector, you can add power to your data cable for a fraction of the cost of upgrading to a PoE capable network switch. Passive PoE power is ‘Always On’ with power delivery on Mode B pins (-4,5 +7,8)..
  • Plug and play. Our 24 port PoE adapter / injector transmits 10/100/1000 gigabit data, delivering lightning fast wired speeds with no loss of signal quality, up to 328 feet. Input voltage range: 48-56 Volts DC. 30 Watt output per port..
  • All of our PoE power injector products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

YuanLey 6 Port PoE Switch with 4 Port PoE+, 2 Ethernet Uplink, 100Mbps, 78W 802.3af/at, Extend Function, Metal, Desktop, Unmanaged Plug and Play

  • 【Port and Rate】This poe ethernet switch Include 4x10/100Mbps POE ports and 2x10/100Mbps uplink. All 1-4 POE ports support IEEE802.3AF/AT POE standard. The double uplink port can connect to nvr, switch, router, etc, make the network more reliable and flexible..
  • 【78W High PoE Power】This poe injector built-in industrial power supply. The whole power is 78W, each port up to 30W and 15.4W in the same time.**Please note: not compatible 24V passive PoE**.
  • 【Plug and Play】This poe network unmanaged switch support automatically detect devices, just plug in the power cord and network cable, no configuration required, easy to use..
  • 【Extend Function】 When the extend mode is enabled, single POE port supports 250m transmission distances and 10Mbps speed, and all PoE ports support VLAN isolation, improve the network safety..
  • 【Wide Applications】PoE and non-POE devices can be connected to this poe hub, such as poe camera/wireless ap, switch, router, computer, etc. It runs without noise and can be installed in office, home, and commercial locations. If you have any questions, please contact our official support, we will provide the best after-sales service.
Check Stock

PLUSPOE 2-Pack Wall PoE Injector 48V 24W Power Over Ethernet Adapter 802.3af for Security IP Camera, IP Voip Phones, AP and More,10/100Mbps

  • Simplify installations with a multi-port midspan injector PoE adapter. Our 8 port PoE injector features 8 Data In (LAN) ports with 8 Data + Power Out (PoE) ports. Includes a compatible PoE injector 48V 60W power supply..
  • Supply continuous Power over Ethernet for up to 8 passive 802.3af or 802.3at devices like VoIP phones, WiFi access points, IP cameras, and other low voltage devices. Always check manufacturer specifications for compatibility verification..
  • PoE injector compatible with IEEE 802.3af or at devices. Mode B Negotiation delivers power on pins 4,5(+) / 7,8(-). Passive “Always On” power means all devices receive the same voltage (48v)..
  • Plug and play. This midspan PoE injector is compatible with your 10/100 Mbps network switch or router, delivering Fast Ethernet standards with no loss of signal quality via 8 Data In ports and 8 Data + Power out ports..
  • All of our PoE products are backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

PoE Texas 24 Multi Port IEEE 802.3at PoE+ Injector - Gigabit Data Active Power Over Ethernet for High Powered Devices 30W PoE Injector for WiFi Access Point & More with 2X 56V 120W Power Supplies

  • Power IP cameras, desktop phones, WiFi Access Points (WAPs) and more. This 802.3af/at compliant multi port PoE injector takes power from a DC source and adds it to a Cat5, Cat5e, or Cat6 ethernet cable to power your PoE Devices..
  • Instantly upgrade your network gigabit switch to IEEE 802.3at PoE+. No need to purchase a larger 24 port switch. You can rely on your smaller, more cost-effective PoE switch and simply add Power + Data using the 802.3at PoE injector..
  • Active PoE means the right power at the right time. An active PoE injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices..
  • Plug and play. Our 24 port PoE adapter / injector transmits 10/100/1000 gigabit data, delivering lightning fast wired speeds with no loss of signal quality, up to 328 feet. Input voltage range: 48-56 Volts DC. 30 Watt output per port. Kit includes two 120 watt power supplies for a total budget of 240 watts..
  • All of our PoE power injector products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

Sophos APX 120 Indoor Access Point and 2YR Central Wireless Standard

  • Sophos APX 320X Outdoor Access Point - 2x2 MIMO, dual radio, dual 5 GHz capable, 4 x external omni-directional antenna included, further sector and directional antenna options available for separate purchase. Includes mounting bracket and clamps for wall and/or pole mount. 5-Year warranty, no extended warranty available..
  • Power adapter/PoE Injector not included, PoE Injector available for separate purchase. 11.5W max. power consumption (802.3af PoE Injector required)..
  • NOTE: Management in Sophos Central only upon launch..
Check Stock

PoE Texas - PoE Injector - 12 Port Gigabit Passive Midspan Injector with 48V 120 Watt UL Power Supply - Power Over Ethernet for 802.3af or at PoE+ Devices VoIP Phone WiFi Access Point IP Camera

  • Instantly upgrade your network to PoE+. Simplify installations with a multi-port midspan injector. This unmanaged midspan PoE injector features 12 PoE ports for simplified transmission of power + data..
  • 10/100/1000 Gigabit Data capability with transparent VLAN passthrough. Power up to 12 IP cameras, desktop VoIP phones, or other low voltage devices. This passive PoE injector will always deliver the same voltage as its power supply..
  • With available power and data delivery options for Mode A or Mode B compatible with IEEE 802.3af or at devices. PoE Texas offers other bundles with assorted power supplies to match your different device requirements..
  • Includes 48 volt 120 watt UL approved power supply for a shared budget of 120 watts. A streamlined and cost-effective multi port solution with 12 x gigabit ports (Data In) and 12 x gigabit PoE ports (Data + PoE Out)..
  • All of our PoE products are backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

Gigabit PoE Splitter 12V 2A Output with IEEE 802.3af/at Standard Compliant 10,100,1000Mbps Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance 5.5×2.1mm DC Plug Cable(PS5712TG)

  • Instantly add PoE to your network switch or router. This small, compact mountable PoE injector screws into the wall near an outlet or to the underside of desks, reducing clutter and offering versatility for your setup..
  • Power IP security cameras, VoIP desktop phones, WiFi access points, and other devices that accept passive 802.3af using a data network cable and this passive Power over Ethernet adapter / single port injector..
  • This midspan injector includes a UL certified 48 volt, 15 watt DC power supply to power devices labeled ‘802.3af’. Delivers power up to 328 ft from the injector site. Compatible PoE devices must have a wattage of 15w or less..
  • Plug and play. Our single port PoE adapter transmits 10/100/1000 Gigabit data, delivering lightning fast wired speeds with no loss of signal quality via one Data In port and one Data + Power Out port..
  • All of our PoE products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

Tripp Lite Gigabit PoE+ Midspan Active Injector - IEEE 802.3at / 802.3af, 30W, 1 Port, Power Over Ethernet (NPOE-30W-1G),black

  • ADDS POE DEVICES TO YOUR LAN WITHOUT A POE SWITCH: PoE+ injector uses existing Cat5e/6/6a cable to supply power to a PoE device connected to a non-PoE switch..
  • EXPAND YOUR WIRELESS NETWORK: The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away..
  • SAVES YOU TIME AND MONEY: This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don’t need to install new AC power lines and electrical outlets..
  • SIMPLE PLUG-AND-PLAY: Quick and easy plug-and-play installation with no configuration necessary. Compact, hand-sized plastic housing ready for mounting on any smooth surface..
Check Stock

PoE Ethernet Power Supply 4 Port POE DC 12V-48V Power Adapter Injector for IP Camera 802.3af/802.3at Device

  • Made of plastic material, sturdy and durable to use. Conform to international safety product standards and is safe to use..
  • This PoE injector is compatible with IEEE802.3af/at network devices. Apply for IEEE802.3af/at standard POE powered devices.
  • This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable.
  • This device does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan..
  • Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.Tip: the power voltage should not be over DC48V..
Check Stock

iCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps

  • Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
  • This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
  • This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
  • This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
  • Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...
Check Stock