Brass Pipe Fittings, Water Hose Adapter, G 1/2 Female to G 3/8 Male Reducer Adapter, Compression Fitting for Kitchen Bathroom Faucet, Pipe Connector with Rubber Washer,(2 Pack)
- ...NDARD SIZE】G 1/2 female x G 3/8 male adapter is regular US size, suitable for most pipe size with 3/8" converting to 1/2" angle stop. Solve the connection problem between the old shutoff valves and the modern faucet supply line. G 3/8 Male OD: 0.54 inch(13.8mm).
- 【NO LEAKAGE】Compression adapter comes with rubber seal gasket, just tighten with the gasket provided and no leaks. No Teflon tape needed. As a converter, be threaded easily onto angle stops, connect your flexible water lines..
- 【WIDELY APPLICATION】Our faucet supply line adapter can be used in the kitchen, bathroom sink, dishwasher, hot water heater, etc. It is a perfect adaptor for 1/2 to 3/8 faucet hose, which will save you the hassle of replacing the valve..
- 【STURDY AND DURABLE】Water hose adapter is made of high-quality brass material and was treated with premium nickel coating. Solid, anti-corrosion, rust-proof, and high-temperature resistance(withstand up to 100°C / 212°F) features fit faucet hot and cold supply lines..
- 【SAFETY】The material of pipe compression fitting adapters are harmless, complied with safety regulations, so they can be used for drinkable water pipes. Enable you to quickly connect a kitchen faucet without having t....
Check Stock
Compression Sleeve Puller (4661) - Remove Nut & Ferrule Of Pipe - Ferrule Puller For 1/2” Copper Water Compression Sleeve - 1/2-Inch Copper Tubing - Plumbing Tools Compression Ring Removal Tool
- Saves A Lot Of Time--This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. Saves a lot of time around cutting old pipes..
- Make Your Life Easy--This compression sleeve puller removes 1/2-inch copper water compression sleeve. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
- Operating Steps--Method 1: Only remove the ferrule---Let the ferrule in between the red notched end of the tool (notched clamping ferrule). Method 2: Both remove the compression nut and ferrule---Place red notched end of tool behind compression nut. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle..
- Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Easy and fast solve the problem of compression valves failing with small leaks.Ideal for working on frozen or corroded supply stops,corrosion resistant &....
Check StockMILMUMU Compatible with Compression Sleeve Puller（03943） and Sleeve Remover for 1/2-Inch Compression Fittings Only
- Compression Sleeve Puller and Sleeve Remover for 1/2-Inch Compression Fittings Only.
- Ideal for working on frozen or corroded supply stops.
- Easily removes compression sleeves Won’t damage walls.
- Wt: 11 ounces Dimensions: 6.8 x 4 x 0.8 inches.
- Function: Removes Compression Sleeves without Damaging Pipe. Screws Directly into Compression Nut for Removal.
Check StockWestbrass D1838QRL-62 Freestanding Pedestal Sink Faucet Supply Line Risers with P-Trap, Flanges and 1/4-Turn Lever Handles, Matte Black
- Classical fully finished P-Trap and lavatory supply kit.
- Two (2) 1/2 in. Copper (5/8 in. nominal) x 3/8 in. compression round angle stops with lever handles and round flanges.
- Two (2) 3/8 in. OD x 20 in. bullnose risers.
- 1-1/2 in. x 1-1/2 in. P-Trap with reducing 1-1/2 x 1-1/4 reducing washer and matching high-box, sure grip flange.
- Meets UPC trap height requirements to prevent sewage gas escaping from drain.
Check Stock
YUHX Lead Free Brass Angle Stop Add-A-Tee Valve, Bidet 3/8 x 3/8 x 3/8 Inch Compression or 1/2 T Adapter for One-Piece Skirted Toilet , 3/8' Compression Outlet Easy Connect 3 Way Diverter
- 1 ★【 Connect Multiple Items 】 Used for adding an outlet on existing 3/8 compression angle stop valve to supply water for faucet , dishwasher , glass rinser , bidets et.
- Suitable for both cold and hot water systems.
- 2 ★【 Heath and environment friendly material 】Lead free brass , chrome-plated tee valve for both potable and non-potable water . For adding an outlet on a angle stop valve for a bidet , water filtration system, dishwasher, second faucet, etc.Used for adding an outlet , Install on angle stop valve.
- 3 ★【 Ideal 3/8 water line splitter 】1/4 turn tee stop valve,so you can freely control on-off of the branch waterway and adjust water flow size to suit your needs.
- 4 ★【Outstanding performance】Built-in rubber ring for better sealing . It's the perfect alternative for people who have a one piece toilet where access to the 7/8 water tank valve is not possible or too cramped to reach.
- This T-Adapter can be installed on a 3/8" OD compression threaded water supply to divert to your bidet and toilet fill valve.
- 5 ★【 T-valve size 】3/8" OD female compression x 3/8" OD compression x 3/8" OD compression or 1/2 thread ,the 3/8 t adapter has 3 outlets , which can be used as one water inlet , two water outlets.
Check StockLASCO 13-2708 Compression Sleeve Puller for 1/2-Inch (5/8 OD) Copper Pipe
- Compression Sleeve Puller pulls the nut and compression sleeve off of the copper pipes.
- Saves time and effort when replacing old angle stops.
Check StockEZ-Fluid Stainless Steel Braided Faucet Connector,Faucet Water Supply Hose Connector Lines 1/2" Fip x 3/8" Comp x 16" (Pack 25)
- Stainless Steel Braided Supply Hose Line Faucet Connector.
- EZ-FLUID Braided Stainless Steel Supply Line has cUPC, NSF Certified Lead Free.
- EZ-FLUID Flexible Water Supply Hose Lines Connectors for Commerical or Residential Kitchen Sink,Bathroom,Indoor/outdoor Sink Faucets. And faucet water supply line extension available as well..
- Stainless Steel Braided SS304 will deliver perfect corrosion protection for the supply line of the Kitchen,Bath Toilet,outdoor sink..
- Plumbing Contactor Pack of 2 pcs 3/8" Compression x 1/2" Fip x 16" Long ，The 3/8" Female Compression hose attachment End will fits to 3/8" Male Comp. inlet on Angle Stop Water shut off Valve,or Any 3/8" Male Compression threaded Fittings,fauct bathroom lavy Toilet water connector.
Check StockEZ-Fluid Plumbing 12\ x 3/8\ Male Compression To 3/8-Inch Female Comp. Stainless Steel Braided Faucet Connector Line Extension, Faucet Extension Supply Hose Connector Lines, Fits Delta Faucet (1-Pack)
- Stainless Steel Braided Supply Hose Line Faucet Connector Hoses.
- EZ-FLUID Braided Stainless Steel Supply Line has cUPC, NSF Certified Lead Free.
- EZ-FLUID Flexible Water Supply Hose Lines Connectors for Commerical or Residential Kitchen Sink,Bathroom,Indoor/outdoor Sink Faucets. And faucet water supply line extension available as well..
- Stainless Steel Braided SS304 will deliver perfect corrosion protection for the supply line of the Kitchen,Bath Toilet,outdoor sink..
- Plumbing Contactor Pack of 10 pcs 3/8" Compression x 1/2" Fip x 20" Long ，The 3/8" Female Compression hose attachment End will fits to 3/8" Male Comp. inlet on Angle Stop Water shut off Valve,or Any 3/8" Male Compression threaded Fittings.
Check Stock
EZ-Fluid Plumbing 30" x 1/2" Fip x 3/8" Comp S.S Braided Flexible Water Hoses Connectors,Faucet Supply Line,Faucet Water Supply Hose Connector Lines For Bathroom,Kitchen,Outdoor Sink Faucets(1)
- Stainless Steel Braided Supply Hose Line Faucet Connector Hoses.
- EZ-Fluid Plumbing 30" x 1/2" Fip x 3/8" Comp S.S Braided Flexible Water Hoses Connectors,Faucet Supply Line,Faucet Water Supply Hose Connector Lines For Bathroom,Kitchen,Outdoor Sink Faucets.
- EZ-FLUID Flexible Water Supply Hose Lines Connectors for Commerical or Residential Kitchen Sink,Bathroom,Indoor/outdoor Sink Faucets. And faucet water supply line extension available as well..
- Stainless Steel Braided SS304 will deliver perfect corrosion protection for the supply line of the Kitchen,Bath Toilet,outdoor sink..
- Plumbing Contactor Pack of 10 pcs 3/8" Compression x 1/2" Fip x 30" Long ，The 3/8" Female Compression hose attachment End will fits to 3/8" Male Comp. inlet on Angle Stop Water shut off Valve,or Any 3/8" Male Compression threaded Fittings.
Check StockSuperior Tool Company 03943 Compression Sleeve Puller and Sleeve Remover for 1/2-Inch Compression Fittings Only
- Ideal for working on frozen or corroded supply stops.
Check StockPasco 4525 Angle On Wrench
- Fits 3/8-Inch or 1/2-Inch MPT compression outlet threads on angle stops.
- Nickel plated steel and precision machined.
Check Stock
Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool
- 【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
- 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
- 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut....
Check StockCompression Angle Supply Stops
1. SharkBite 23036-0000LF Angle Stop Valve
The SharkBite 23036-0000LF Angle Stop Valve is a durable compression angle supply stop made of brass. This angle valve is easy to install, as it requires no special tools to connect. It has a quarter-turn ball valve, which makes it easy to shut off the water supply when necessary.
2. Everflow Supplies 6004-NL Brass Angle Stop Valve
The Everflow Supplies 6004-NL Brass Angle Stop Valve is another great option to consider. This compression angle supply stop is made of brass and has a chrome-plated finish, which gives it an attractive design. It has a quarter-turn ball valve, which helps regulate water flow easily.
3. Keeney 2622PCLF Compression Angle Valve
The Keeney 2622PCLF Compression Angle Valve is a lead-free compression angle supply stop that is made of brass and has a chrome-plated finish. This angle valve is NSF-61 certified, which means it is safe and reliable to use for drinking water applications. The Keeney angle valve also has a quarter-turn ball valve that makes it easy to shut off water supply quickly.
4. Homewerks VGV-1LH-B4B Angle Stop Valve
The Homewerks VGV-1LH-B4B Angle Stop Valve is a quality compression angle supply stop that is made of brass and has a chrome-plated finish. This angle valve also has a quarter-turn ball valve that helps regulate water flow. It is very easy to install and comes with a pre-installed washer so that there is no need for any additional adjustment.
5. American Valve G31SL 3/8" Compression Angle Valve
The American Valve G31SL 3/8" Compression Angle Valve is a durable compression angle supply stop that is made of brass and has a chrome-plated finish. This valve has a quarter-turn ball valve that aids in regulating water flow, and it also comes with a pre-installed washer that makes installation easier.
6. Plumb Pak PP800-6 Angle Stop Valve
The Plumb Pak PP800-6 Angle Stop Valve is an affordable option for those on a tight budget. It is a compression angle supply stop that is made of brass and has a chrome-plated finish. This angle valve has a quarter-turn ball valve that makes it easy to turn off water supply quickly.
7. BrassCraft G2CR19X C1 1/2-in Compression Inlet x 3/8-in Compression Outlet Chrome Angle Stop Valve
The BrassCraft G2CR19X C1 1/2-in Compression Inlet x 3/8-in Compression Outlet Chrome Angle Stop Valve is another great option to consider. This durable compression angle supply stop is made of brass and has a chrome-plated finish. It has a quarter-turn ball valve that makes it very easy to regulate water flow.
8. LASCO 06-9271 Angle Stop Valve
The LASCO 06-9271 Angle Stop Valve is an affordable and reliable compression angle supply stop. It is made of brass and has a chrome-plated finish. This angle valve has a quarter-turn ball valve that makes it easy to turn off water supply quickly.
9. PROPLUS GIDS-231406 Compression Angle Stop Valve
The PROPLUS GIDS-231406 Compression Angle Stop Valve is a PVC compression angle supply stop that is made of brass and has a chrome-plated finish. This angle valve has a quarter-turn ball valve and is very easy to install. It is also very affordable, making it a great option for those on a budget.
10. Danco 10770 Angle Stop Valve
The Danco 10770 Angle Stop Valve is a compression angle supply stop made of brass and has a chrome-plated finish. It has a quarter-turn ball valve that makes it very easy to regulate water flow. The Danco angle valve is very easy to install, making it a great option for DIYers.
11. Mueller Industries 107-173NL ProLine Quarter Turn Angle Valve
The Mueller Industries 107-173NL ProLine Quarter Turn Angle Valve is a durable compression angle supply stop made of brass and has a chrome-plated finish. This angle valve has a quarter-turn ball valve that makes it easy to regulate water flow quickly. The Mueller Industries angle valve is very easy to install, making it a great option for those looking for a hassle-free DIY project.
12. Eastman 10749LF Quarter Turn Angle Stop Valve
The Eastman 10749LF Quarter Turn Angle Stop Valve is a lead-free compression angle supply stop that is made of brass and has a chrome-plated finish. This angle valve has a quarter-turn ball valve that makes it easy to stop water flow quickly. It is also very easy to install, making it a great option for DIYers looking for a hassle-free installation.
Buying Guide
When deciding which compression angle supply stop to purchase, there are several factors to consider. you will want to ensure that the angle valve adequately fits the size of your pipes. consider the material of the valve; brass is a common material used because of its durability. You will also want to consider the finish of the valve, as it can affect the overall look of your plumbing. look for features such as a quarter-turn ball valve, which can make it easy to regulate water flow.
there are many different compression angle supply stops available for purchase. When deciding which angle valve to purchase, consider factors such as the size, material, and finish. look for features such as a quarter-turn ball valve that can make regulating water flow quick and easy. By considering these factors, you can choose the best compression angle supply stop for your plumbing needs. 
