Reviews Compression angle supply stops

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut....
Check Stock

EZ-Fluid Stainless Steel Braided Faucet Connector,Faucet Water Supply Hose Connector Lines 1/2" Fip x 3/8" Comp x 16" (Pack 25)

  • Stainless Steel Braided Supply Hose Line Faucet Connector.
  • EZ-FLUID Braided Stainless Steel Supply Line has cUPC, NSF Certified Lead Free.
  • EZ-FLUID Flexible Water Supply Hose Lines Connectors for Commerical or Residential Kitchen Sink,Bathroom,Indoor/outdoor Sink Faucets. And faucet water supply line extension available as well..
  • Stainless Steel Braided SS304 will deliver perfect corrosion protection for the supply line of the Kitchen,Bath Toilet,outdoor sink..
  • Plumbing Contactor Pack of 2 pcs 3/8" Compression x 1/2" Fip x 16" Long ，The 3/8" Female Compression hose attachment End will fits to 3/8" Male Comp. inlet on Angle Stop Water shut off Valve,or Any 3/8" Male Compression threaded Fittings,fauct bathroom lavy Toilet water connector.
Check Stock

Brass Pipe Fittings, Water Hose Adapter, G 1/2 Female to G 3/8 Male Reducer Adapter, Compression Fitting for Kitchen Bathroom Faucet, Pipe Connector with Rubber Washer,(2 Pack)

  • ...NDARD SIZE】G 1/2 female x G 3/8 male adapter is regular US size, suitable for most pipe size with 3/8" converting to 1/2" angle stop. Solve the connection problem between the old shutoff valves and the modern faucet supply line. G 3/8 Male OD: 0.54 inch(13.8mm).
  • 【NO LEAKAGE】Compression adapter comes with rubber seal gasket, just tighten with the gasket provided and no leaks. No Teflon tape needed. As a converter, be threaded easily onto angle stops, connect your flexible water lines..
  • 【WIDELY APPLICATION】Our faucet supply line adapter can be used in the kitchen, bathroom sink, dishwasher, hot water heater, etc. It is a perfect adaptor for 1/2 to 3/8 faucet hose, which will save you the hassle of replacing the valve..
  • 【STURDY AND DURABLE】Water hose adapter is made of high-quality brass material and was treated with premium nickel coating. Solid, anti-corrosion, rust-proof, and high-temperature resistance(withstand up to 100°C / 212°F) features fit faucet hot and cold supply lines..
  • 【SAFETY】The material of pipe compression fitting adapters are harmless, complied with safety regulations, so they can be used for drinkable water pipes. Enable you to quickly connect a kitchen faucet without having t....
Check Stock

EZ-Fluid Plumbing 12\ x 3/8\ Male Compression To 3/8-Inch Female Comp. Stainless Steel Braided Faucet Connector Line Extension, Faucet Extension Supply Hose Connector Lines, Fits Delta Faucet (1-Pack)

  • Stainless Steel Braided Supply Hose Line Faucet Connector Hoses.
  • EZ-FLUID Braided Stainless Steel Supply Line has cUPC, NSF Certified Lead Free.
  • EZ-FLUID Flexible Water Supply Hose Lines Connectors for Commerical or Residential Kitchen Sink,Bathroom,Indoor/outdoor Sink Faucets. And faucet water supply line extension available as well..
  • Stainless Steel Braided SS304 will deliver perfect corrosion protection for the supply line of the Kitchen,Bath Toilet,outdoor sink..
  • Plumbing Contactor Pack of 10 pcs 3/8" Compression x 1/2" Fip x 20" Long ，The 3/8" Female Compression hose attachment End will fits to 3/8" Male Comp. inlet on Angle Stop Water shut off Valve,or Any 3/8" Male Compression threaded Fittings.
Check Stock

RIDGID 27023 Model 2002 One Stop 2-in-1 Wrench for Angle Stops, Straight Stops, and Compression Couplings

  • ONE STOP WRENCH: Provides the exact size wrench needed to install angle stops, straight stops, compression couplings, making it perfect for working with supply lines and shut-off valves.
  • 2-IN-1 TOOL: Features a 15/16-in. open-end wrench, a 9/16-in. open-end wrench, and an open-end 12-point box-line wrench in one tool to make plumbing work quick and easy.
  • EFFICIENT GRASPING AND TIGHTENING: Smaller wrench allows you to grasp riser nuts in twice as many positions while the larger wrench tightens compression nuts.
  • COMPACT DESIGN: Allows you to conveniently store the smaller wrench inside the larger wrench’s tubular body and simply unscrew to remove it when it’s time for use.
  • MULTIPURPOSE: Ideal for a variety of other installation tasks including appliance legs, showerheads, faucet nuts, and toilet bowls.
Check Stock

Yeleah Feed Water Adapter Angle Stop Adapter Valve Cold Water Supply Valve Compression 1/4 X3/8 X3/8 for Reverse Osmosis Refrigerator Ice Maker Coffee Brewers

  • 1/4"X3/8"X 3/8" Angle Stop Water Valve Adapter ,Brass Feed Water Adapter Compression Valve,Made Of One Piece Design Lead Free Brass And A....
  • 1/4"X3/8"X 3/8" Compression Valve Female Male t Valve Tee Valve Mixing Valve Adapter With Seals,Sink RO Water Line Splitter,Frigerator Ice Maker....
  • Water valve tap ,Reverse Osmosis Water Faucet Adapter Splitter,Water Line Adapter Splitter Valve 1/4" Compression Fittings Can Be Connected 1/4" Pex....
  • 1/4 Fridge Ice Maker Water Line Splitter ,Under Sink Water Valve Adapter Can onto the normal 3/8 Compression Fitting that most everyone has at the end....
  • 1/4 Angle Stop Valve Adapter Fits Most American Home Kitchen Sink 3/8"Angle Stop Valve ,Water Diverter Valve Stop Valve, Copper Line Refrigerator Ice....
Check Stock

EZ-Fluid Plumbing 30" x 1/2" Fip x 3/8" Comp S.S Braided Flexible Water Hoses Connectors,Faucet Supply Line,Faucet Water Supply Hose Connector Lines For Bathroom,Kitchen,Outdoor Sink Faucets(1)

  • Stainless Steel Braided Supply Hose Line Faucet Connector Hoses.
  • EZ-Fluid Plumbing 30" x 1/2" Fip x 3/8" Comp S.S Braided Flexible Water Hoses Connectors,Faucet Supply Line,Faucet Water Supply Hose Connector Lines For Bathroom,Kitchen,Outdoor Sink Faucets.
  • EZ-FLUID Flexible Water Supply Hose Lines Connectors for Commerical or Residential Kitchen Sink,Bathroom,Indoor/outdoor Sink Faucets. And faucet water supply line extension available as well..
  • Stainless Steel Braided SS304 will deliver perfect corrosion protection for the supply line of the Kitchen,Bath Toilet,outdoor sink..
  • Plumbing Contactor Pack of 10 pcs 3/8" Compression x 1/2" Fip x 30" Long ，The 3/8" Female Compression hose attachment End will fits to 3/8" Male Comp. inlet on Angle Stop Water shut off Valve,or Any 3/8" Male Compression threaded Fittings.
Check Stock

SharkBite 23056LF 1/2" X 1/4" Od Compression Angle Stop

  • Shark Bite 1/2″ x 1/4″ OD brass barb compression chrome angle stop quarter turn 1 per bag.
  • Suitable for installing at the end of an ice maker supply line or waste drain.
  • The Shark Bite barb connection system is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired.
Check Stock

SUNGATOR Angle Stop Add-A-Tee Valve, 3/8

  • Lead Free Brass: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet..
  • Wildely Used: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc..
  • Durable: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products..
  • Better Sealing: Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end..
  • Package Includes: 3/8 Inch Lead Free Add-A-Tee Valve (2 pcs).
Check Stock

Refrigerator Water Line Kit - 25FT Ice Maker Tubing with Tee Stop Valve，Flexible Hose with 1/4 Compression Fittings for Potable Drinking Water

  • 【Potable Drinking Water Use】:Our refrigerator water line is BPA free，made by food grade materials, non-toxic ingredients,odorless and....
  • 【Multiple Applications】:The hose is perfect for linking existing 1/4" outlet angle stop valve or other water supply to Ice....
  • 【Moderate Hardness and Durable】:Our 1/4" OD（Outside Diameter）ice maker tubing is flexible but not soft, running through limited spaces....
  • 【Easy Installation】:The water line had the preformed ends and each end with brass 1/4" compression fittings,even DIY,your first installation or....
  • 【Includes tee stop valve and instructions】:Our ice maker installation kit includes a 3/8"- 1/4"- 3/8" tee stop valve, you can add a branch....
Check Stock