Reviews odroid Power Switch

TOPGREENER High Speed USB Wall Outlet, 15A Tamper-Resistant Receptacles, Compatible with iPhone, Samsung Galaxy, LG, HTC & other Smartphones, UL Listed, TU2154A-GD, Gold

• ... One M9, Dell, Motorala, Sony, Nokia, Lenovo Yoga/ThinkPad, Acer tab and more, Smart phone four-in-one OTG data cable micro USB splitter a drag four auxiliary power supply.
• 【Enhance Your Device】Expands into 3 USB Ports for Raspberry Pi Zero v1.3 (with camera connector) and W (with Bluetooth and Wifi), Orange Pi, ODROID, Banana Pi ,Raspbian Jessie Tablet.
• 【Compact Multifunction HUB】There are three USB ports, you can insert U disk, keyboard, mouse and other equipment (but does not support the simultaneous insertion of two U disk), and the other with a micro USB female, you can switch to the U-switch or keyboard power supply.
• 【Achieve Your Work efficiently】OTG port provides a simple way to connect phone to a USB capable computer for data synchronization and file transfers, Transfer Rate: USB2.0, 480/12Mbps, 1.5Mbps. Please NOTE only for Micron USB connector smart phone or tablet.
• 【NOTE】AVOID CONNECTING WITH FAST CHARGER.Make sure the output of the charger is 5V (4.7-5.3V) / 2A.The chip inside the hub will be BURNED OUT if the VOLTAGE > 5.3V.

LeTaoXing DC 5V 4A Switching Power Supply Adapter 20W 5V/4A for Raspberry Pi X828/X825/X820 SATA Expansion Board/ X750/ X720/ X700 UPS/ X735 Power Management Board/Jetson Nano/T300/T200/T100

• ...you are powering with it, The voltage of the power supply will be reduced to 5V when it is connected to the appliance..
• Compatible with X750/ X705/ X725/ X700/ X720 UPS, X735 power management board and NVIDIA Jetson Nano board, T300, T200, T100 and ROCK64 board,it can also be used with WeBoost connect RV 65 850012 , Odroid XU4,Odroid XU4Q..
• Tips: Various devices have different plugs size, the voltage and DC plug polarity are internal positive (+) external negative (-), the required current should be less than or equal to this product, please pay attention to the choice, avoid plugs or parameter selection errors can not be used.
• Package include: 1pcs 5V 4A Power Supply. LeTaoXing Provides Friendly Customer Service and if you have any questions with the product, please feel free to contact us and we will provide you a satisfying solution..

MakerSpot Micro USB OTG Hub for Raspberry Pi Zero 4 Port High Speed Sync and Extension Cable Adapter Also Works with Android Tablet Raspbian Jessie Linux

• Expands into 4 USB Ports for Raspberry Pi Zero v1.3 (with camera connector) and W (with Bluetooth and Wifii), Orange Pi, ODROID, Banana Pi.
• Compatible with Samsung Galaxy S2, Samsung Galaxy Note, Samsung Galaxy S3/S4, Galaxy Tab3 8.0, Sony Xperla NX-02D, Sony Xperla acro HDIS12S.Toshiba REGZA Phone-TO1D, and Sony S-series Tablet..
• Draws power only from OTG port, current for USB devices is limited to host capability.
• With USB2.0 4-Port Hub, for Mouse, Keyboard, U disk, Camera, Printer and so on. Easy plug and play installation device, no external power needed No driver needed for Android and PC with USB 2.0 port Transfer Rate: USB2.0, 480/12Mbps, 1.5Mbps.

LoveRPi Active Cooling Media Center PC Case with Fan for Raspberry Pi 3, Libre Computer Board, ASUS Tinker Board (Translucent)

• ULTIMATE PERFORMANCE AND DURABILITY: Exclusively designed for the Raspberry Pi 3 Model B+, Libre Computer Boards, ASUS Tinker Board, and ODROID-C2***, this revolutionary case is built with durable polycarbonate and active cooling fan to provide performance and protection to your SBC..
• INTRICATE FEATURES: We analyzed over 30 cases and created four revisions to build this final case design. It features numerous design elements not found on any other case and takes into account all of the popular single board computers on the market..
• QUICK AND EASY ASSEMBLY: Screw optional design uses numerous latches to secure both the board and the case together. MicroSD card slot is extended to prevent damage allow for easy tool-less removal. GPIO ribbon cable slot enables expansion without sacrificing protection..
• TRANSLUCENT WITH FRONT LED AND IR: Sleek design is perfect for media center applications with a clean glossy front cover for LEDs and IR sensors found on Libre Computer Boards and the ODROID-C2. Raspberry Pi 3 requires separate IR receiver (diode + transistor)..
• TWO FAN SPEEDS AND SUPPORTS TALL HEATSINKS: Brushless DC fan can be connected to 5V for maximum performance or 3.3V for quiet cooling. Can be used with tall heatsinks up to 12mm for best results..

LoveRPi Active Cooling Media Center PC Case with Fan for Raspberry Pi 3 Model B+, Libre Computer Board, ASUS Tinker Board (Black)

• ULTIMATE PERFORMANCE AND DURABILITY: Exclusively designed for the Raspberry Pi 3 Model B+, Libre Computer Boards, ASUS Tinker Board, and ODROID-C2***, this revolutionary case is built with durable polycarbonate and active cooling fan to provide performance and protection to your SBC..
• INTRICATE FEATURES: We analyzed over 30 cases and created four revisions to build this final case design. It features numerous design elements not found on any other case and takes into account all of the popular single board computers on the market..
• QUICK AND EASY ASSEMBLY: Screw optional design uses numerous latches to secure both the board and the case together. MicroSD card slot is extended to prevent damage allow for easy tool-less removal. GPIO ribbon cable slot enables expansion without sacrificing protection..
• MATTE BLACK WITH FRONT LED AND IR: Sleek matte black design is perfect for media center applications with a clean glossy front cover for LEDs and IR sensors found on Libre Computer Boards and the ODROID-C2. Raspberry Pi 3 requires separate IR receiver (diode + transistor)..
• TWO FAN SPEEDS AND SUPPORTS TALL HEATSINKS: Brushless DC fan can be connected to 5V for maximum performance or 3.3V for quiet cooling. Can be used with tall heatsinks up to 12mm for best r....

SunFounder Raspberry Pi UPS Power Supply Module V2.0 Supports Pass Through Charging, 5V/3A Lithium Battery Power Pack Expansion Board Compatible with Raspberry Pi 4, 3 and All Model B/B+

• ➢Raspberry Pi UPS - A Power Supply Module designed for Raspberry Pi UPS compatible with Raspberry Pi 4, 3 and all Model B/B+ series. Also suitable for other boards powered by USB (5V/3A) such as Banana Pi/ODROID-C4..
• ➢Pass Through Charging - Requires two 18650 Batteries (not included), with Pass through Charging function, it can power to the Raspberry Pi while charging ..
• ➢Over Charge/Discharge Protection - Charging ends when the total battery voltage reaches 8.4V. When the single battery voltage is below 3.2V, the battery protection activates and the battery is no longer discharged..
• ➢Balance Charging & Over Heating Protection - The battery charging current will be reduced or even discharged if the voltage of a single battery exceeds 4.2V. If the temperature reaches 75 degrees Celsius, the DC-DC will shut down to prevent overheating damage..
• ➢UPS Output: 5V/3A, UPS Input: 5V/2A, Dimension: 90mm x 56mm x 24mm.

C4Labs Zebra Case - for ODROID-C2 REV 0.3- Black Ice

Banana Pi BPI-M5 Amlogic S905X3 Single Board Computer with LPDDR4 4GB RAM and 16GB eMMC Storage for AIOT Support Android Debian Raspbian Armbian

• [High Performance Processor] Amlogic S905X3 quad-core Cortex-A55 processor (2.0GHz).
• 16GB eMMC onboard storage ---- MicroSD slot with support for up to 256GB expansion.
• [4K Smart Home Audio and Video chip] Adopt quad-core 64-bit ARM-A55 architecture CPU chips, integrate G31 graphics processor, support 4K video decoding and 4K video output.
• [SDK and Various System Operation Support] Banana Pi M5 support multiple various OS, like Android 9, and Raspbian and Linux system, as well as third party image Odroid Android image.
• [Multifunction Interfaces] 4 x USB 3.0 ports.
• Power Source: 5 volts at 3 amps via micro USB (TYPE C).
• [Wifi & BT support via expansion board] BPI M5 support SDIO interface Wifi&BT, you can buy the WiFi&BT board, 802.11 a/b/g/n/ac 2T2R WiFi and Bluetooth 5.0..
• [Wiki] https://wiki.banana-pi.org/Banana_Pi_BPI-M5.
• If you have any after-sales problems, please contact monica @ smartfire.cn. Click "WayPonDEV" and ask a question or leave the message in our forum at "forum.youyeetoo .com/"..

LoveRPi Performance Pro Active Cooling Case White for Raspberry Pi 3 ODROID-C2

• MAXIMUM PERFORMANCE: Raspberry Pi 3*/2/B+ and ODROID-C2/C1+**.
• DUAL MODE ACTIVE COOLING: ABS Case comes with 4 Rubber Feet, 8 Screws, Active Cooling Fan 5V or 3.3V Operation.
• ACCESS TO EVERYTHING: Camera Cable Slot, Display Cable Slot, GPIO Cable Slots! Beauty without compromising capability!.
• USABLE WITH TALL HEATSINKS: Fits LoveRPi High Surface Area 10mm Heatsink Set, Keeps Raspberry Pi 3 at Maximum Performance and Cool (under 60C).
• Raspberry Pi 3 MicroSD card slot does not have a spring. PLEASE REMEMBER TO REMOVE THE MICROSD CARD PRIOR TO INSTALLING OR REMOVING THE CASE!.

Linux Ubuntu Metal Sticker 19 x 28mm [898]

• MULTI-OS SUPPORTED: Compatible with Linux Kernels up to 6.0, Ubuntu 22.10 ~ 16.04, Debian 11/10/9/8, Linux Mint 21~18, LMDE 5~1, Kali Linux, Pop!_OS,....
• SUPPORTED ARCHITECTURES: x86_64/x86_32 (PCs, VirtualBox..), aarch64/armhf (Raspberry Pi 2+, Odroid...). UNSUPPORTED DISTRIBUTIONS: currently NOT....
• FAST WI-FI SPEED: You can get 867Mbps Wi-Fi speed on 5GHz band or 300Mbps speed on 2.4GHz band, best choice for online 4K video streaming, gaming,....
• BOOST YOUR WIRELESS RANGE: Comes with 2 Pieces of Long Range WiFi Antennas of 5dBi, this Linux Ubuntu WiFi USB Adapter Ensures Range Extended WiFi....
• ADVANCED WPA3 SECURITY: Secure Your Devices and Network Privacy by Supporting the Latest Wireless Encryption: WPA3-SAE, WPA2/WPA/WEP, AES/PSK/TKIP,....