Reviews Yerf Dog Go Karts

Jeremywell #40 Roller Chain Sprocket B Type 1\ Bore 60 Tooth

  • 1/4" Keyway with 2 Setscrews at 90 degrees.
  • Same business day order processing before 12:30PM PDT.
  • This is commonly used on Yerf-dog and Murray go karts and can be used on any 1" live axle..
Check Stock

Go Kart Clutch 3/4" Bore 10T with #40 41 420 Chain for Go Kart Minibike Yerf-Dog karts with Tecumseh

  • 【General Fitment】: This go kart clutch and chain fit for Go Kart Minibike Yerf-Dog karts with Tecumseh.
  • 【Fitment】: Fit for 2- 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200. And for Briggs Stratton and 2-6.5 HP with 3/4" Shaft. Tecumseh Engines 2-6.5 HP with 3/4" Shaft.
  • 【Product Detail】: 3/4" Bore 10T Sprocket with 40/41/420 Chain designed for 2-7Hp 212cc Predator engines clutch performance parts.
  • 【Attention】: 3 /4-inch centrifugal clutch for single wheel belt direct drive karts with tires No Larger Than 15" tall.
  • 【Before Purchasing】: Please check carefully up and below information about our go cart clutch 3/4 shaft fitment before your purchasing, any question, please contact us first, thank you!.
Check Stock

Ignition Coil for BMS Dazon Kinroad Raider Tomberlin Crossfire 150R Yerf Dog Spiderbox Twister 150cc Go karts Honda Ruckus NPS50 GY6 Scooter Moped

  • Ignition Coil for BMS Dazon Kinroad Raider Tomberlin Crossfire 150R Yerf Dog Spiderbox 150cc Go karts.
Check Stock

MOOSUN Minibike Go Kart Clutch 3/4" Bore 10 Tooth with #40/41/420 Chain

  • Heavy Duty 10T Sprocket with 40/41/420 Chain 212cc Predator Belt Drive Centrifugal Clutch.
  • 3/4" Bore Designed for 2-7Hp 212 Predator Engines Clutch Performance Parts.
  • 3 4 inch Centrifical Clutch for Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall.
  • Fitment: Fits Yerf-Dog karts with Tecumseh.
  • Fits 2 - 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200.
Check Stock

VASHLY Go Kart Clutch 3/4" Bore 10T with #40 41 420 Chain for Go Kart Minibike and Fun Kart Engine

  • 【10 Tooth Centrifugal Clutch with #40 41 420 Chain】This go kart clutch 3/4" Bore 10T with #40/41/420 Chain, Designed for Single Wheel Drive Karts with Tires no larger than 15" Tall, fit for Go Kart Minibike Yerf-Dog karts with Tecumseh.
  • 【Compatible】The centrifugal clutch 3/4" bore 10 tooth fit for Tecumseh Engines 2 - 6.5 HP 2300 RPM, Fit for 2- 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200. And for Briggs Stratton and 2-6.5 HP with 3/4" Shaft..
  • 【Product Material】 The Go kart ​clutch is made of quality iron material, which is lightweight, portable, sturdy, and durable, has maximum torque, is wear-resisting, and has fast heat dissipation..
  • 【Easy to Install】 Easy to install, Metric Property Bolt and Washer Kit are Included. Mounts Onto Crankshaft Using Bolt and Washer on the End of the Crankshaft. Bi-directional Operation, Clutch Can be Mount Inward or Outward on Crankshaft..
  • 【Before Purchasing】Package Includes 1 x 3/4 10 Teeth Clutch, 1 x #40/41/420 Chain, 2 x Clutch Bolts 、2 x Washer Kits, and 2 x Screw wrenches, Plea....
Check Stock

QAZAKY Enhanced 71" inch Throttle Cable 63" inch Long Casing Wire Compatible with Manco ASW 8252-1390 Go Kart Cart Mini Bike Buggy Gokart Scooter Lawn Mower

  • ✪ Original high quality brand new ”QAZAKY” parts, 100% tested before sending out..
  • ✪ Compatible with Manco / American Sportworks ASW Go Karts 8252-1390..
  • ✪ Fits for Gas Scooter, Go Kart, Mini Bike, Buggy, Motorcycle, Lawn Mower etc. It may fits some Yerf Dog, Kandi go kart models..
  • ✪ Wire total length: 71inch / 180cm. Outer casting length: 63inch / 160cm..
  • ✪ All of the original “QAZAKY” parts are backed by 180 days’ carefree return, BUY WITH CONFIDENCE!.
Check Stock

Starter Motor for GY6 125cc 150cc 152/157QMI 152/157QMJ Scooter Moped ATV Quad Go Kart Yerf Dog Spiderbox GX150 Hammerhead Twister

  • Brand new starter motor for 125cc and 150cc Chinese GY6 4-stroke engines QMJ152/157 QMI152/157.
  • 150cc Eton Seaseng Mopeds ATVs Go Karts..
  • Center hole to center hole: 79mm (3.11").
Check Stock

Disc Brake Pads Set for Yerf-Dog Spiderbox 150cc GX150 go kart Gy6 49cc 50cc 125cc 150cc 200cc 250cc ATV Dirt Bike Pit Bike Roketa TaoTao Baja Sun Scooter Parts

  • Fit most 125cc and 150cc scooters, ATVs, and go karts with GY6 4-stroke QMI152/157 QMJ152/157 engines.
  • Stock stator for Yerf Dog SpiderBox 150cc GX150 go kart.
  • Plug Style: 4-pin, female (3 pins used) with two separate single pins.
Check Stock

Octopus Go Kart Live Axle Steel Sprocket 60 Tooth Fits #40#41#420 Chain with 1” Bore 1/4' Keyway – Sprocket Only

  • ✅ INCLUDES: 1 – 60 Tooth Black Steel Live Axle Sprocket with Bore.
  • ✅ SPECIFICATIONS: Teeth: 60 Tooth / Material: Steel / Clearance: 1” Bore / Outer Diameter: 9.5” / Bore Outer Diameter: 1” / Bore Inner Diameter: 1” / Keyholes: 3 / Pre-lubricated Treated Steel.
  • ✅ PERFECT FIT: Please Reference Our Compatibility List Below to Ensure Our Parts are Compatible with Your Component(s). Compatible with Yerf-Dog and Murray Go Karts Bikes and UTV vehicles..
  • ✅ WARRANTY & CARE: Reliable Customer Service Is Our #1 Priority. Here at Octopus, We Readily Offer a 30-Day Money Back Guaranteed and 90-Day Limited Manufacturer’s Warranty. Which Covers Manufacturing Defects. For Maximum Usage, We Suggest Avoiding Canned Lubricant and Using Grease or Oil..
Check Stock

LAFORMO Centrifugal Clutch 3/4" Bore for Predator 212cc Small Engine Go Kart Mini bike Lawnmower Fun Kart Engine 3/4 Bar (10T with #40/41/420 Chain)

  • Package list: 1 x Centrifugal Clutch, 1 x #40/41/420 Chain, 2 x Screw.
  • Fits 2-7Hp 212 Predator Engines centrifugal clutch 3/4" bore 10 tooth+ #40/41/420 chain kit for go kart..
  • Fits 2 - 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200.
  • Fitment: Fits Yerf-Dog karts with Tecumseh.
  • Also fits any other engines with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones.
Check Stock