Reviews With G Thread

ChgImposs Metric & Imperial & US Screw Gauge SAE Whitworth 55 Degree & Metric 60 Degree & & US 60 Degree Thread Pitch Gauge for Industrial Measurement

  • It is 55 Degree & 60 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Metric: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25.
  • Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • All the blade was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

52pcs Thread Pitch Gauge SAE Stainless Steel Screw Pitch Measuring Tool (Metric&British Whitworth(52pcs))

  • ✿Metric: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25.
  • ✿Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • ✿Made of stainless steel, the toothed edges are sharply defined and the numbers are stamped and easy to read, ensure the accuracy of measurement.
  • ✿It is useful to check the tool angle when cutting threads on a metal lathe, check the angle on the thread cutting tool on the V-groove of the gauge.
  • ✿Use for check the thread size, can be used for measuring the metric and imperial screw thread.
Check Stock

SPEEDWOX Thread Pitch Gauge Set Thread Measuring Gauge Set 58Pcs Metric & America SAE & Inch 52Pcs Metric & Inch 51Pcs America SAE Screw Pitch Gage Center Gauge Stainless Steel Pitch Gauge

  • It is 55 Degree & 60 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Metric: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25.
  • Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • All the blade was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

NewkeepsR 2PCS-16G(1.2mm) 316L Steel Calor Style Taper Insertion Pin for Ear/Nose/Navel/Nipple/Lip/Eyebrow Stretcher, Body Piercing Stretching Kit Assistant Tool

  • Size: 16ga(1.2mm) thickness,2.4'' length(60mm). One package contains 2 insertion pins. ① Style A: a hollow at the end, ( "No Thread Inside" will NOT screw onto your externally threaded jewelry,Just holding). ② Style B: No hollow,just stretch piercing hole to 16g(1.2mm) thickness..
  • ① Style A Function: Used for assisting in the placement of shaft. Put piercing bar in the end of the pin, then push it though.Pin will come out of the hole and piercing bar will be in. Great for changing jewelry. Groove at the end helps prevent slipped and cover external thread to avoid injuries while insert.Protect skin from external threads scratch. ② Style B Function: Stretch/enlarge hole for gauge modification purpose,gauge up size from 18g to 16g.(Used some alcohol during this process).
  • Advantage: ① More safe and smooth than acrylic taper which hold bacteria and difficult to heal. ② Painless and safe when piercing bar push into hole as the large end cover external thread. ③ Doesn’t irritate as our taper grow from small to large gradually.④ Reinsert/reopen a piercing hole that had shrunk a bit or begin to close up,Actually don't need go back to piercer.⑤ It's not as needle sharp but pointed enough..
  • Tips: ① Go slow when stretching,or using some lubric....
Check Stock

NewkeepsR 2PCS-14G 1.6mm 316L Steel Calor Style Taper Insertion Pin for Ear/Navel/Nipple/Lip/Tongue Stretcher Body Piercing Stretching Kit Assistant Tool

  • Size: 14ga(1.6mm) thickness,2.4'' length(60mm). One package contains 2 insertion pins. ① Style A: a hollow at the end, ( "No Thread Inside" will NOT screw onto your externally threaded jewelry,Just holding). ② Style B: No hollow,just stretch piercing hole to 14g(1.6mm) thickness..
  • ① Style A Function: Used for assisting in the placement of shaft. Put piercing bar in the end of the pin, then push it though.Pin will come out of the hole and piercing bar will be in. Great for changing jewelry. Groove at the end helps prevent slipped and cover external thread to avoid injuries while insert.Protect skin from external threads scratch. ② Style B Function: Stretch/enlarge hole for gauge modification purpose,gauge up size from 16g to 14g.(Used some alcohol during this process).
  • Advantage: ① More safe and smooth than acrylic taper which hold bacteria and difficult to heal. ② Painless and safe when piercing bar push into hole as the large end cover external thread. ③ Doesn’t irritate as our taper grow from small to large gradually.④ Reinsert/reopen a piercing hole that had shrunk "a bit" or begin to close up,Actually don't need go back to piercer.⑤ It's not as needle sharp but pointed enough..
  • Tips: ① Go slow when stretching,or using some lubr....
Check Stock

HOAOH 52 Pcs Stainless Steel Thread Gauges Whitworth Imperial 55 Degree, Metric 60 Degree, US 60 Degree Thread Gauge for Screws Measuring Tool

  • √ Size: Metric (mm) - 60° and Whitworth Imperial - 55°..
  • √ Metric Size: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3, 0.25.
  • √ Imperial: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • √ Typically used to check the thread size is correct, and checking tool angle while cutting threads in metal turning lathes..
  • PRECISION MEASUREMENT - 52pcs Thread Gauge, The reading precision is more highly to helping you more accurately measured the size and gap distances..
Check Stock

JJC Dedicated Bayonet Reversible Lens Hood Shade for Nikon AF-P DX Nikkor 18-55mm F3.5-5.6G VR & AF-P DX Nikkor 18-55mm F3.5-5.6G Lens on Nikon D3500 D5600 D7500 Camera Replace Nikon HB-N106 Lens Hood

  • 【Compatible Lens】:This lens hood fits Nikon AF-P DX Nikkor 18-55mm F3.5-5.6G VR Lens(55mm Filter thread), Nikon AF-P DX Nikkor 18-55mm F3.5-5.6G Lens(55mm Filter thread) and NIKON 1 NIKKOR VR 10-100mm f/4-5.6(55mm Filter thread).It replace Nikon HB-N106 Lens Hood..
  • 【Attention】:This lens shade doesn't fit Nikon AF-S DX Nikkor 18-55mm f/3.5-5.6G VR II(52mm Filter thread),Nikon AF-S DX Nikkor 18-55mm f/3.5-5.6G VR(52mm Filter thread) and Nikon AF-S DX Nikkor 18-55mm f/3.5-5.6G II(52mm Filter thread)..
  • 【55mm filter & lens Cap】:Minimizes flare and ghosting by blocking out stray light，it also allows the use of 55mm filter and lens cap..
  • 【High Quality】:Made of high quality ABS material, reversible design allows you to mount the hood in reverse for compact storage..
  • 【Protective】:Protects your lens from accidental impact and the elements..
Check Stock

MOSNAI Golf Cart Ball Joint Kit Tie Rod End for EZGO TXT 2001-up Electric or Gas Golf Cart Driver and Passenger Side 70902-G01 70902-G02 (2 PCS)

  • ✅【Fit Models】Golf cart EZGO tie rod ends ball joint, fits 36V EZGO TXT 2001-up electric & gas golf carts..
  • ✅【Replaces OEM Part】Driver side-left hand thread (included 1Pcs), OEM#70902-G01.
  • Passenger side-right hand thread(included 1Pcs), OEM#70902-G02..
  • ✅【Function】EZGO tie rod ends, replacing your worn tie rods will improve your carts steering and reduce tire wear..
  • ✅【Easy Installation】The boots contain grease, don't need to add extra. Replaces your worn out or damaged parts directly, no need to modify the vehicle..
  • ✅【Package Content】1PCS 70902-G01 left-hand thread outer tie rod end + 1PCS 70902-G02 right-hand thread outer tie rod end, premium quality materials to provide a long service life..
Check Stock

uxcell PVC Barb Hose Fitting Connector Adapter 16mm or 5/8

  • APPLICATION.The adapter’s barbed fitting creates a tight seal on flexible PE pipe when used with a hose clamp (sold separately)..
  • ADVANTAGE.An O-ring is delivered to the end of each joint thread, eliminating the need for a sealant or raw tape.
  • HIGH QUALITY MATERIAL. made of PVC ,have Alkali resistance, high temperature resistance, corrosion resistance, strong anti-aging, high strength, no break..
  • -30 degree to 100 degree F temperature range..
  • BARB HOSE FITTING.has a male National Pipe Thread (G) thread on one end and a barbed insert on the other.
  • Size: 16mm or 5/8″ Barb x 3/4″ G Male.
Check Stock

4 Pieces Garden Hose Adapter Kit Faucet Adapter Kit, Multi-Thread Sink to Hose Adapter Water Filter Adapter Female to Female/Male to Female, Swivel Faucet Aerator Adapter Water Hose Adapter

  • 【Sink to Hose Adapter】55/64"-27 female thread connected to faucet spout, G3/4 male thread conneted to garden hose..
  • 【Multi Type Faucet to Hose Adapters】Come with a standard male thread brass adapter (15/16''-27) for the female faucet spout. Included 55/64''-27 - G 3/4 garden connector and G 3/4 - G 1/2 male thread adapters. Connect to different sizes of garden hoses as well as faucets..
  • 【Big Angle Rotation】Faucet adapter set can swivel 360 degrees, which makes it easy to reach everywhere you need water spray, allowing the faucet to garden hose adapter kit widely used in daily life..
  • 【Easy to Install】Faucet aerator key is included to remove the original inside aerators. Package with 5 plastic adapters and washers, the garden hose adapter is simplified installation and does not need other extra tools..
  • 【Wide Application】Garden Hose Adapter kit to use in different places. Different sizes of connectors allow widely used places like a garden hose, kitchen sink, bathroom sink, and water filter, which is made of chrome-plated brass for gre....
Check Stock