Reviews Wifi Module

TECHTOO WiFi Antenna 2.4GHz 10 dBi for Wireless Router - Security IP Camera - USB Card Adapter - PCI PCIe Cards - Range Extender - PC Desktop - Drone - Signal Booster (RP-SMA 1-Pack)

  • ...t Applicable cable: 0.81mm RF coaxial cable Application Technology: IEEE802.11 ax/ac/a/b/g/n, WiMax, Zigbee, Bluetooth Wireless Length: one：42cm（16.53inches） another：47cm（18.50inches）.ngff cable ipex mhf antenna wire wifi internal pigtail antenna.
  • Ultra small size connector for Note Book PC, computer GPS module cable, GSM module cablem WLAN 2.4GHz module cable, WLAN 5.8Ghz module cable, Digital apploance, Dual band ghz mini antennas for long wwan wifi booster gaming omnidirectional wifi antenna.
  • NOTE: Only Use for M.2 (NGFF) Interface, Do Not Use for MINI pcie Interface (please look the Picture), 2.4/5G Dual Frequency Internal High Gain WiFi Antenna mhf4 Jack pigtail cable extension directional extender cable antenna replacement kit for wireless module & bluetooth wifi cards.
  • Frequency Range: DC up to 6GHz (VSWR: 1.3 max. at 0.1~3GHz.
  • VSWR: 1.4 max. at 3~6GHz) ( option: 1.2Ghz 2.4Ghz 3Ghz 6Ghz 8Ghz 12Ghz 18G... ) Rated Voltage: AC 60v Contact Resistance: 20m ohm max.(Signal) and 10m ohm max.(Ground) Withstand Voltage: AC 200V Insulation Resistance: 500M ohm Min./DC 100V density.
  • Also work for intel 9260ngw ax200ngw 7260hmw and the Jetson Nano Module M.2 wifi card with MHF4 connector.killer ax1650 broadcom asus wifi modem internal cards alfa e....
Check Stock

Bluetooth MHF4 IPEX 2.4Ghz 5Ghz 5.8G WLAN Network Adapter PC WiFi Antenna for Intel 7260 8260 8265 9265 9260 9560 AX200 AX Killer M.2 IPEX4 Wi-Fi Wireless WLAN Card Banana Pi 4 M2 Zero Hachintosh

  • ...t Applicable cable: 0.81mm RF coaxial cable Application Technology: IEEE802.11 ax/ac/a/b/g/n, WiMax, Zigbee, Bluetooth Wireless Length: one：42cm（16.53inches） another：47cm（18.50inches）.ngff cable ipex mhf antenna wire wifi internal pigtail antenna.
  • Ultra small size connector for Note Book PC, computer GPS module cable, GSM module cablem WLAN 2.4GHz module cable, WLAN 5.8Ghz module cable, Digital apploance, Dual band ghz mini antennas for long wwan wifi booster gaming omnidirectional wifi antenna.
  • NOTE: Only Use for M.2 (NGFF) Interface, Do Not Use for MINI pcie Interface (please look the Picture), 2.4/5G Dual Frequency Internal High Gain WiFi Antenna mhf4 Jack pigtail cable extension directional extender cable antenna replacement kit for wireless module & bluetooth wifi cards.
  • Frequency Range: DC up to 6GHz (VSWR: 1.3 max. at 0.1~3GHz.
  • VSWR: 1.4 max. at 3~6GHz) ( option: 1.2Ghz 2.4Ghz 3Ghz 6Ghz 8Ghz 12Ghz 18G... ) Rated Voltage: AC 60v Contact Resistance: 20m ohm max.(Signal) and 10m ohm max.(Ground) Withstand Voltage: AC 200V Insulation Resistance: 500M ohm Min./DC 100V density.
  • Also work for intel 9260ngw ax200ngw 7260hmw and the Jetson Nano Module M.2 wifi card with MHF4 connector.killer ax1650 broadcom asus wifi modem internal cards alfa e....
Check Stock

5V ESP8266 Dual Channel WiFi Relay Module IOT Smart Home Phone APP Remote Switch with 100M Transmission Distance

  • ON-BOARD ESP-01 WIFI MODULE: The relay board is equipped with on-board ESP-01 WiFi module and high performance microprocessor STM8S103..
  • UART DEBUG INTERFACE: The relay has reserved UART debug interface and STM8 SWIM program download interface..
  • SMART CONFIG TECHNOLOGY: The module uses smart config technology to complete the account and password configuration on the APP ESP-01 WiFi module on the mobile phone, and configure the username and password memory functions..
  • ON-BOARD 5V RELAY: This relay module adopts On-board 5V,10A250V AC 10A30V DC relay, which can continuously pull 100,000 times with diode discharge protection and short response time..
  • WORKING STATUS INDICATOR: The module has board mode selection and real-time working status indicator..
Check Stock

ACEIRMC 2pcs ESP32-CAM WiFi Bluetooth Camera Module Development Board ESP32 with Camera Module OV2640 2MP for Arduino (4pcs)

  • The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing the ESP32 Core.
  • ESP32-CAM WiFi Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP for Arduino, Support Image WiFi Upload and TF Card.
  • Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
  • Support OV2640 and OV7670 cameras, built-in flash.
  • Support image WiFi upload and Support TF card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module.
Check Stock

ESP8266 Wire~Less Wi~Fi Transceiver Relay Module, 4 Channel DC 5V Smart Switch Relay Module for Smart Home Automation System IOT A~PP Con~Troller

  • SUPPORT TWO WORK MODE: Mode 1: cellphone carry on WIFI module directly. Mode 2: cellphone and WIFI module carry on router together..
  • TRANSMISSION DISTANCE: In the open environment,when mobile phone is carrying on the WIFI module ,maximum transmission distance is 100 meter. When the WIFI module and cell phone carrying on the router at the same time the signal transmission distance depends on router signal..
  • SAFE: Optocoupler isolated output, safe and reliable..
  • LED INDICATOR: On board relay LED indicator , mode option and working statue LED indicator..
  • SHOP WITH CONFIDENCE: To Provide You With the Highest Quality Service, If You Have Any Question, Please Feel Free to Contact Us.We Will Provide After-sales Service Until You Are Satisfied..
Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

  • ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
  • FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
  • This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.
Check Stock

Acxico 2 pcs ESP8266 ESP-01S + 5V WiFi Relay Module Smart Home Remote Control Unlock Board

  • This module uses genuine relays and normally open interfaces. High stability and low power consumption..
  • Strong driving ability, stable and reliable performance. High efficiency, fine workmanship, and durable..
  • Add one more ESP-01S module. This smart relay module is based on the ESP-01S WIFI module design. It can be used to DIY your own smart switch. It can be remotely controlled by the mobile phone APP and provides APP and LUA source programs. It's easy to use right away..
  • The package includes：2 pcs ESP8266 ESP-01S Relay module, relay WIFI smart socket (with ESP-01S).
  • We are very grateful for all customers’ opinions to improve sales, if you are not satisfied, please contact us to find the best solution.
Check Stock

Kovoq Smart Home Remote Stater Kit for Bedroom/Nursery Room, Smart Caregiver Pager, Control Smart Thermostat, Routines, Works with Homepod, Nest Audio, up to 330ft Range, 6 Customizable Big Buttons

  • 【WIFI & Zigbee Hub Gateway】Please make sure your smart devices is compatible with Tuya. This Tuya ZigBee smart wireless gateway works with 2.4G WIFI and ZigBee HA 3.0. It is integrated WIFI module and Zigbee module, so that the Tuya Zigbee sub-devices can be controlled remotely via WiFi on the APP or locally controlled via Zigbee network. Via Zigbee protocol, even if WiFi is not available at home, it will not affect local control of the sub-devices..
  • 【Group Control & APP Push】 Automated scenarios can be set through the APP. Add your Tuya Zigbee devices on Tuya APP (make sure the sub-devices support Tuya), and create smart group for automated smart scenarios applications. Through smart settings, the smart home hub gateway will automatically push notifications to the APP. This Zigbee WiFi Gateway Hub supports up to 30 sub-devices online at the same time..
  • 【Compatible with Tuya ZigBee Hub (Also Smartthings Supported)】- Considering the status of unstable network or no network, ZigBee 3.0 switch module is really an irreplaceable must to combine with ZigBee gateway to form a home LAN, NO MORE WORRY about no and weak network, easily get control via connected devices as long as there is stable ZigBee signal.
  • Allows for more devices connected via Zi....
Check Stock

Honeywell Wireless Lynx Touch L7000 Home Automation/Security Alarm Kit with WiFi, Zwave & GSM Module

  • Updated 2015 Model with Newest Firmware and Software.
  • Wifi Connectivity for Remote and Monitoring Options (Requires Monthly Fee).
  • Zwave ready for Control of Lights, Door locks, Thermostats and Garage Doors.
  • Includes: (3) 5816 Door/Window Transmitters, (1) 5834-4 Four-Button Wireless Keyfob (1) 5800 Pir-Res Wireless Motion Detector (1) Wifi Module (1) Zwave Module (1) 4gl GSM Cellular module.
Check Stock

Onyehn 1set Wireless Bluetooth WiFi card Module Board with Antenna Cable Part for Xbox One Replacement Pulled

  • If you have any questions after receiving the goods, please contact the after-sales service. If it doesn't work, we will provide a full refund. Please....
  • Original and Pulled From Microsoft Xbox One Coonosle.(Note: Because it is removed in the original machine, the Bluetooth module scratches are....
  • Replace the WIFI Module, it Can Solve the Wireless Controller Disconnected (Broken) Problem..
  • If Your Controllers Don't Sync, Or If Wifi Access Points No Longer Show Up Then This Could Be the Part You Need..
  • Package Includes: 1 x Card Module, 1 x Antenna Cable..
Check Stock