Reviews What Is Nato Strap

Clockwork Synergy - 14mm Braided Perlon NATO Nylon Red Replacement Watch Band Strap

  • Authentic Licensed Clockwork Synergy Nato Watch Strap.
  • Branded Clockwork Synergy Box with Every order!.
  • "Instantly add a Little Class to your Wardrobe".
Check Stock

SMALLRIG Articulating Magic Arm with Screw Ballhead and NATO Clamp Ballhead, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig - 2071

  • ▶ NATO Clamp Ballhead: Attach cage with NATO rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw.
  • ▶ Quick Release & Adjust Angle: It features quick release and attachment and could be slid to get the balance of the whole kit.The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp.
  • ▶ Precision locking device: A single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared hex spanner is ready to lock it tighter.
  • ▶ Extensive compatibility: The ballhead with 1/4″ screw thread can not only be connected to monitors, camera cages (such as gh5 cage rigs SMALLRIG 2049, SMALLRIG 2050, SMALLRIG 2051, SMALLRIG 2052), but also can be attached to monitor cages with NATO rail, such as Cage(5″) SMALLRIG 1726, SMALLRIG 2008,SMALLRIG Cage for Ninja Assassin 1788, SMALLRIG Monitor Cage 1834 or other products with nato rail.
  • ▶ What You Get: 1 x Ballhead with 1/4’’ Screw.
Check Stock

SmallRig Battery Grip Compatible Cage Only for BMPCC 6K Pro, Comes with Built-in NATO Rail & Locating Holes for ARRI and Cold Shoe Mount - 3382

  • ... clamp 3271 for stable signal. The holes at top-right corner and bottom-left corner allow access to follow focus rod clamp 3276. Its bottom is compatible with dual rod clamp 1943, ensuring the distance between the dual rods and the center of the lens is 85mm, and allowing installing lens support..
  • 【SWEET DESIGN】Strap slots are included to add a wrist strap or neck strap for your camera to prevent dropping. Besides, with built-in magnetic suction design, the included screwdriver is ready for your assembly without fear of loss..
Check Stock

SmallRig NATO Rail with Locating Screw for ARRI 48mm BUN2521B

  • 【Install Way】SMALLRIG BUN2521 attaches to other accessory mounts for ARRI by using a 3/8”-16 screw and two locating pins.
  • 【Quick Release】The NATO Rail compatible with NATO clamps or other accessories features NATO clamp for quick release. For example, SMALLRIG Magic Arm 2071, NATO Clamp 1973, NATO Handle 1995/2187..
  • 【Anti-off】The spring-loaded safety pins on both ends prevent your devices from accidentally sliding off..
  • 【Light Weight】The NATO Rail is made of aluminum alloy. Length of 48mm, weighs only 27g..
  • 【Other NATO Rails】If you prefer other NATO Rail mounting options, we have SMALLRIG NATO Rail BUN2468(50mm), NATO Rail BUN2483(70mm), NATO Rail BUN2484(90mm), NATO Rail BUN2486(150mm)..
Check Stock

SMALLRIG Articulating Magic Arm with Double Ballhead NATO Clamps, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig - 2072

  • Double NATO Clamp Ball Head:An articulating magic arm with double NATO Clamp Ballhead (Made of aluminium alloy, durable, solid and sturdy), which can realize quick released and attachment. It could be slided to get the balance of the whole kit by the NATO rail design.
  • Flexibility: Camera monitor mount could be attached to a camera or monitor cage with NATO rail by the NATO clamp. The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp.
  • Strong Compatibility: The double NATO Clamp Ballhead can not only be attached to camera cages with NATO rail (such as gh5 cage rigs SmallRig 2049, SmallRig 2050, SmallRig 2051, SmallRig 2052) , top plates or side plates (such as Side Plate SmallRig 1847), but also can be attached to monitor cages with NATO rail, such as Monitor Cage(5″) SmallRig 1726, SmallRig 2008, Assassin Cage for Ninja SmallRig 1788,Cage for SmallHD SmallRig 1834 or other products with nato rail.
  • Knob Lock:A single wingnut (rotary knob) is applied to lock and tighthen the double ballhead directly, and thumb screws on both ends are utilized to lock the devices manually.
  • Please Note: the best load (max load) of the NATO Clamp Ballhead is 1.5kg.
Check Stock

Nitze Stinger Handle Universal Camera Top Handle with Built-in QR NATO Clamp - PA28-A

  • 【Multiple Mounting Points】Nitze nato camera handle PA28-A is filled with 1/4”-20 threaded holes, 1/4” locating holes, 3/8” ARRI locating holes all around the handle for more accessories expansion..
  • 【Built-in NATO Rail】Camera top handle grip built-in NATO rail on the top of the handle provides convenience for attaching accessories with NATO clamp..
  • 【Built-in QR NATO Clamp】Nato clamp top handle built-in QR NATO clamp on the bottom of the handle can be quickly attached and detached by the quick release lever..
  • 【Cold shoe Adapter】Nato rail top handle equipped with a cold shoe adapter which can be attached by two 1/4” screws. You can mount it in different locations on the handle for flexibility..
  • 【Ergonomic Design】Nitze stinger handle is ergonomically designed to provide you with a more comfortable experience during long-time shooting..
Check Stock

SMALLRIG Universal Low-Profile Quick Release NATO Rail Safety Rail 50mm/2inches Long with 1/4'' Screws for NATO Handle Camera Cage EVF Mount – BUN2468

  • 【NATO RAIL STANDARD】SMALLRIG BUN2468 is compatible with standard NATO accessories for quick release, such as clamps, handles and monitor holders, enabling you to quick attach and release the rig components.
  • 【THIN & LIGHTWEIGHT】The thickness of SMALLRIG 2468 is 6mm, and the length of it is 50mm. Weighs only 14g, it is made by Aluminum Alloy, very sturdy and lightweight, easy for storage.
  • 【ANTI-OFF DESIGN】SMALLRIG The safety pins on both side prevents your NATO accessories from accidentally sliding off.
  • 【MOUNTING OPTIONS】It can be attached to any accessories with two 1/4-20 holes via two 1/4-20 screws (included) to provide a mount for QR handle, EVF mount, NATO clamp, and camera plate, etc.
  • 【RECOMMENDATION】It works with items with NATO clamp, such as SmallRig NATO Clamp 1973, SmallRig Monitor Mount with NATO clamp 2100 and BSE2347, SmallRig Rotating Nato Handle HTN2362, for quick attachment and release.
Check Stock

SmallRig Cage for Nikon Z5/Z6/Z7/Z6II/Z7II Camera 2926

  • Compatibility: This formfitting camera cage is made for Nikon Z5/Z6/Z7/Z6II/Z7II. And compatible with the HDMI & USB clamp of ID 2927 to protect the HDMI & USB cable head..
  • Key Functions: To ensure the comfort and safety of hand-held shooting, there are interfaces of the shoulder strap and wrist strap of the cage. Built-in cold shoe at the top of the cage makes it easy to install the microphone. And there is a built-in NATO Rail at the left side of the cage, it can be attached to Nato Clamp Handle 2187 for quickly switching..
  • Multiple Mounting Interfaces: With multiple 1/4”-20 thread holes and 3/8”-16 location holes for Arri. Aim to attach accessories such as Magic Arm 2070, Top Handle 2165, Monitor Mount 2903, etc..
  • Stable And Anti-twist: The cage will hold the camera tightly through a 1/4”-20 screw at the base and an M2.5 screw at the side. To keep the camera stable and no shaking..
  • Lens Bayonet Protect: Two threaded holes are reserved at the bottom of the front end of the cage, which is compatible with the FTZ lens adapter ring 2244, to protect the bayonet of the lens..
Check Stock

Compatible for Apple Watch Bands,Oimaigroo Replacement LGBT Straps Bracelets Nylon Fabric Rainbow Elegant for iWatch 42mm/44mm

  • Compatibility: This watch band is perfectly compatible with iWatch all versions of Series 6, Series 5(2019), Series 4(2018), Series 3, Series 2,....
  • Comfort: Inspired by military and NATO watchbands, this watch strap is made of premium nylon fabric, lightweight, breathable, washable, and fast dry.....
  • Durable: Upgraded manufacturing process to prevent the thread loosing, high quality metal clasps and adapters make this band rugged and durable..
  • Easy Installation: Each band comes with iWatch adapters, the newly updated connector at both ends locks into watch interface precisely and securely.....
  • What You Get: 1 x Nylon Band (NO watch included). If you have any problem or not satisfied with the goods within one year, please do not hesitate to....
Check Stock

Luminox FN.3900.26.2 Nato Black Strap

  • Original Luminox nato 3 rings black strap made from high quality heavy nylon material with brushed stainless steel buckle and strap keepers.
  • This is a 22 mm replacement band for Luminox 3000, 3900, 3050, 3950 and 8400 series watches.
  • Brushed stainless steel signature single-tongue buckle, Band has 17 adjustment punch holes, In front: fixed 2x brushed steel loop, On back: fixed 1x....
Check Stock