Reviews Welding Fixture Clamp T nut

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

4pcs Heavy Duty C-Clamp, Wood Clamps, Stainless Steel Right Angle Clamps Universal Bracket for Welding Carpenter Building Household Mount (Silver)

  • Material: Made of high-quality aluminum alloy precision casting, brushed surface, corrosion resistance, no rust, very strong, not easy to break..
  • C-Clamp Size: 4.13"x1.26"x1.35" (LxWxH)..
  • Ractical Design: This C-clamp is designed for woodworkers, welders and construction workers. It is suitable for general clamping needs for fastening, gluing and welding in metalworking and automotive applications. Flat design of the clamp ensures that the object being clamped will not deform easily..
  • Multi-purpose: This C-type fixture is specially designed for woodworkers, welders, construction workers. Heavy duty C clamp Suitable for parts assembly, fastening, welding, woodworking, metal processing, automobile manufacturing and other industries..
  • Easy To Use: No additional tools are required, just hand tighten. With an adjustable positioning screw, can easily clip to any desktop up to the clamping thickness is about 0.1-1 inches. Easy to disassemble, save more time and improve work efficiency..
Check Stock

Jacazooy Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable

  • ✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use..
  • ✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth..
  • ✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion..
  • ✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force..
  • ✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error).
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock

Pneumatic Clamp, 300mm SC3250 100PSI Professional Professional Pneumatic Hold Down Clamp

  • SPECS-- Length: 300mm / 11.8in, Air Inlet Interface: M10, Cylinder Specification: SC32*50, Maximum Working Pressure: 9Kgf/cm²（0.9mpa）100PSI, Movable Distance of Clamping Rod: 60mm / 2.3in, Clamp Screw: M8.
  • ADVANTAGES-- The pneumatic clamp helps ensure the machining accuracy of the workpiece, and can reduce the intensity of labor of workers.
  • MORE-- Base Fixing Screw: M6 * 4pcs, Base Fixed Screw Spacing: right and left(19mm / 0.7in), up and down(31.8mm / 1.2in, Package Weight: Approx.1084g.
  • EASY TO USE-- The 300mm professional hold down clamp has simple operation, and is easy to achieve automatic control.
  • SCOPE OF USE-- This 100psi pneumatic clamp can be used in welding, fixture, mold and other positions.
Check Stock

SURPASSOLAR Universal Replacement Parts for Hard Folding or Soft Folding Tonneau Cover-4pcs* Rear Clamp/Wrench,6pcs* T-Bolt,2pcs*Diamond nut,2pcs* Front Clamp.

  • Included: 2pcs*Diamond nut, 2pcs* Front Clamp, 4pcs* Rear Clamp/wrench, 6pcs* T-Bolt..
  • Fitment: Fits Hard Tri-Folding Truck Bed Tonneau Cover or Hard Four-Folding Truck Bed Tonneau Cover, Soft Quad-Fold, Soft Tri-Fold Truck Bed Cover, and so on..
  • Materials: Made of Nylon glass fiber（PA66 GF30） and stainless steel, durability, and stability.T - Bolt welding part, well-made, firm, and reliable, not easy to break..
  • Usage: Easy installation, backup for the replacement..
  • Note: If you have any questions, please get in touch with us..
Check Stock

Cylinder Pneumatic Clamp Air Clamp Hold Down Clamp with U-Bar, GH-12130 Air Toggle Clamp

  • METAL MATERIAL: This pneumatic clamp is made of high-strength metal material, which is anti-oxidation, wear-resistant, strong and reliable.
  • STABLE OPERATION: Built-in air flow control provides smoother operation during repetitive clamping operations than manual clamps.
  • HIGH EFFICIENCY: The pneumatic clamp can shorten test time,and improve production efficiency which reduce labor intensity of workers.
  • WITH U-BAR: Holding screw moves on the U-shaped hold-down bar for larger clearance angle.
  • WIDELY APPLICATION: The pneumatic clamp can be used in welding, fixture, mold and other positions.
Check Stock