Reviews Welding Nut

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

WeldingCity 1-Lb ER309L Stainless Steel 309 TIG Welding Rod 1/8\x36\ | Pack of 1-Lb

  • TIG Welding Gun Holder: This steel welding torch holder weighs 1.7lb with simple overall shape. It has silver granular matte texture.The base is electroplated and polished to reduce the surface roughness and look bright and smooth.
  • Strong Magnetic Base: The powerful ferrite magnet that has heavy-duty holding stamina and the base are connected by a SC 4.8 screw and nut, which has good performance strength grade.
  • Convenient Welding Helper: Torch holder will keep your TIG torch secured, the versatile design provides multiple option for torch placement in the holder.
  • Free of Working Table: Powerful magnet clamps to workbench or the side of the welder, supporting the welding torch firmly, so it won't get bumped off the welding table. The wire/cable can also be nicely arranged.
  • Fit Most TIG Gun: Our welding torch stand is suitable for most TIG torches.
Check Stock

Butt Welding Clamps, Sturdy Durable 16pcs Butt Welding Clamps ,for Sheet Metal Auto Car Truck Door Skin Panel, for Precision Butt Welding and Edge to Edge Welding(16pcs)

  • High-quality and durable:This set of clips has excellent performance in precision butt welding and edge-to-edge welding. The butt welding tongs are made of galvanized steel, rust-proof, heat-resistant and durable. The smooth metal surface prevents rust, is not easy to deform, and has a long service life..
  • Professional welding clamp tools:Each welding square tool tube clamp can extend the clamp block, leaving a 0.040 inch (1cm) gap between the panel and the edge welding. Suitable for straight or curved plates. The minimum gap of the welding plate is about 1 mm, which can be adjusted to a farther position as needed..
  • Good performance: These clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Professional use:Sheet metal welding tongs are designed for welding operations. Very suitable for welding cracked metal floors, automotive sheet metal surfaces, door skins or prefabricated panels assembled in re-skinning projects. These clips can fix panels of any shape anywhere..
  • Easy to use:After spot welding the two panels together, remove the wing nut release device and toggle, just remove the fixture from the work befor....
Check Stock

Single Tab Weld Nut with Target - Spot Weld Nuts 5/16-18 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (10)

  • 10 Pack 5/16-18 Spot Weld Nuts - Single Tab - With Target.
  • This Tab Spot Weld Nut is a recessed electrode guide greatly facilitates welding to thin materials. It is ideal for use when a self-locating spot-weld nut is needed. This weld nut can be used in restricted areas such as corners, channels, and other confined areas..
  • This Tab Spot Weld Nut is extremely versatile and will provide a robust spot weld connection in a wide range of applications and conditions. If your product or application has fastener space constraints, you should consider the use of this weld nut..
  • This weld nut has a narrow body that is well suited for use in confined areas..
  • The weld nut features a strong single button projection which gives a deeper, more penetrating weld than is ordinarily obtained from other types of projections..
Check Stock

WeldingCity Medium Duty 1-piece Type Victor Style Acetylene Welding Brazing Nozzle 0-W-1 (Size 0) with W-1 Mixer for 100 Series Torch Handles

  • Premium Victor style acetylene gas welding/preheating/brazing nozzle W-1 series one-piece type for 100 series torch handles (not for J-100 series)..
  • Double O-ring sealed spiral mixer (W-1 type) blends oxy-acetylene gas. 65° elbow angle. Brass coupling nut with built-in snap ring..
  • Medium duty welding/preheating/brazing for use with oxygen-acetylene gas. Work with Victor light to medium duty 100 series (not J-100) torch handles such as 100C/100FC/WH26/WH260 and other aftermarkets versions..
  • Available nominal tip orifices: 000, 00, 0, 1, 2, 3, 4, 5, 6 and 7. Pack of 1 welding nozzle..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock

uxcell Weld Nuts,M8 Square UNC Coarse Metal Machine Screw Gray Pack of 50

  • Application: Used for pipe furniture, tables and chairs, shelves, vehicles, trolley casters and other threaded connection..
  • Steps: First clean the welding surface, using sandpaper or steel brush to remove the joint oxide.Second welding a little bit and adjust the verticality of the thread .Finally solder all the solder joints..
  • Package Content: 50 Pcs （+/- 2％） x Square Weld Nut.
  • Advantages: Flat solder joints, steel ,good weldability, thread size accuracy..
Check Stock

uxcell Weld Nuts,7/16-20 Tab Base Carbon Steel Machine Screw 4 Projection Silver 25Pcs

  • Application: Used for pipe furniture, tables and chairs, shelves, vehicles, trolley casters and other threaded connection..
  • Steps: First clean the welding surface, using sandpaper or steel brush to remove the joint oxide.Second welding a little bit and adjust the verticality of the thread .Finally solder all the solder joints..
  • Package Content: 25Pcs x Square Weld Nut.
  • Advantages: Flat solder joints, steel ,good weldability, thread size accuracy..
Check Stock