Reviews Weld Pipe Mill

2 Pcs M18x1.5 Thread Adapter, 304 Stainless Steel

  • 【Material】The mounting bung is made of stainless steel(Stainless Steel 304 for corrosive environments, rigid and durable body design), easy to weld on O2 sensor parts, exhaust, headers, down pipes, etc..
  • 【Installation】Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
  • 【Size】M18X1.5 thread adapter, confirm the product size before buying..
  • 【Parameter】Use for your custom sensor install, exhaust, down pipe, headers, exchangers and other installations where weld-in or weld-on metric connection is needed..
  • 【Package include】 2 PCS M18 Mounting Adapter. It comes with 1 year warranty. Any problems just contact us to resolve..
Check Stock

Marlboro Weld-On Hinge, Mill Finish, 5 x 3/4 In., 4PPU4

  • Price For: Each Pin Type: Nonremovable Mounting: Full Surface Finish: Mill Item: Weld-On Hinge Holes: Without Color: Natural Holes per Leaf: 0 Left/Right Hand: Left/Right Range of Motion: 360 Degrees Hardware: Not Included Material: Steel Finish: Mill Height: 5" Width: 3/4" Pin Dia.: 3/8" Pin Material: Brass with Grease Fitting.
  • Load Capacity: 360 lb. Country of Origin (subject to change): United States.
Check Stock

Permatex - 80333 - Muffler & Tailpipe Putty 4 oz net wt 2 foil pouches

  • Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains....
  • The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It....
  • Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam....
  • Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes,....
Check Stock

MH GLOBAL Corner Rounding End Mill Set Shank Milling Cutter 8 PC HSS 4 Flute 1/16-3/8''

  • Wooden Box Dimension: 3-3/8 in L x 5-7/8 in W x 4 in H *Rough Estimation*.
  • Corner Rounding End Mill Set Shank Milling Cutter 8 PC HSS 4 Flute 1/16-3/8''.
  • Can Be Re-Sharpened Repeatedly Without Changing Form.
Check Stock

Permatex 80335 Muffler and Tailpipe Sealer, 3 oz. 3-Pack

  • Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains No Solvents Or Volatile Organic Compounds (Vocs)..
  • The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It Creates A Permanent Bond Stronger Than Steel..
  • Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam Connections Or Holes..
  • Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes, Gas And Commercial Furnaces And Water Heaters..
Check Stock

J-B Weld 37901 ExtremeHeat High Temperature Resistant Metallic Paste - 3 oz

  • Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains No Solvents Or Volatile Organic Compounds (Vocs)..
  • The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It Creates A Permanent Bond Stronger Than Steel..
  • Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam Connections Or Holes..
  • Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes, Gas And Commercial Furnaces And Water Heaters..
Check Stock

CWI Gifts 18" Rustic Cotton Snowman Pick, Multi

  • Made of stainless steel, is not easy to bend, accuracy of reading.
  • Measurements read in standard on one side, and metric on the opposite side.
  • The scale is calibrated in fractional dimensions from 1/32 to 3/16 inch in 1/16 inch increment markings.
  • Welding Gage is designed for internal alignment and determining root weld spacing.
  • The gauge measures internal mismatch of pipe wall, scribe lines, weld fillet and crown height.
Check Stock

RIDGID 36278 Model 460-12 Portable TRISTAND Chain Vise, 1/8-inch to 12-inch Pipe Vise

  • Designed with an optimized base layout to maximize the working area.
  • Features a convenient lug to clamp the weld ground.
  • Rugged leg chain and durable tool tray withstand tough jobsite demands.
  • An adjustable rear leg provides stability and allows you to level the pipe.
  • Chain pipe vise has a 1/8-inch to 12-inch (3 mm to 300 mm) pipe capacity.
Check Stock

AMERIMAX HOME PRODUCTS 2526519 2 in x 3 in B or Side Elbow Brown Aluminum, Two-by-Three

  • Connects 3 in. S&D pipe to 3 in. S&D pipe, & to NDS parts that fit 3 in. S&D connections such as Spee-D, 3, 5, & 8 in. Pro Series Channel Drain Outlets, 6 in. Low-Profile Adapters, 4 & 6 in. Square Grates, 3 & 4 in. Round & Atrium Grates, Pop-Up Emitters.
  • Adds a 90° turn from 3 in. Sewer & Drain (S&D) pipe to 3 in. S&D pipe in non-pressurized drainage and sewer piping systems.
  • Adds a 90° turn from select drainage products such as channel drain outlets, drainage grates, and pop-up emitters to 3 in. S&D pipe.
  • Attach 3 in. S&D pipe to one end of 90° elbow and 3 in. S&D pipe to the other end.
  • also connects 3 in. S&D pipe to select drainage products that accommodate 3 in. S&D connections.
  • solvent weld to PVC components for a watertight connection.
  • Comes with one PVC Elbow. Meets applicable ASTM standards..
Check Stock

NDS 9P06 Downspout Adapter Centered PVC IPS, 3-Inch by 4-Inch by 4-Inch

  • Connects 3 in. X 4 in. downspout to 4 in. S&D pipe.
  • Conveys water from downspout to drain pipe.
  • Connects 3 in. X 4 in. Downspout to 4 in. Sewer and Drain (S&D) pipe in non-pressurized drainage systems.
  • Attach 3 in. X 4 in. end to downspout and connect other end to 4 in. S&D pipe.
  • solvent weld to PVC components for a watertight connection.
  • Comes with one PVC Downspout Adapter. Meets applicable ASTM standards. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects or we’ll replace it.
Check Stock