Reviews Water Pump Bushing Tool

Flex-a-lite 14524 Mill Finish 1/2\ Fan Spacer Kit

This fan spacer extends the fan 2.5 inches off the water pump flange. It comes with bolts and an adapter bushing for 5/8" and 3/4" water pump shafts. Designed to fit both Chevy and Fords. Fords.

PUMP KIT FOR GEMU090: The Ice-O-Matic Pump Kit designed for the GEMU090 Nugget Pearl Ice Machine, Pump kit installed inside the ice maker cabinet for built in applications..
IDEAL FOR ICE MACHINES WHERe FLOOR DRAIN IS NOT AVAILABLE: This ice bin sump pump is perfect for installation in office break rooms, doctors offices or residential homes, that might not have access to a floor drain..
PREVENTS FLOODING: This pump kit helps remove the water that condenses after ice melts inside the machine, preventing the ice maker from being flooded and making it easier to clean..
DRAINAGE: This part forces drain water to a maximum of 10 feet and includes the pump, wiring harness, and tubing. The check valve is designed to prevent repumping of drain water into the drain hose..
KIT INCLUDES: Pump and motor with check valve, Switch mounting bracket assembled to switch assembly, Wire harness, Pressure hose (clear), Drain hose (white preformed), Stainless Steel shield and Misc Hardware (Snap Bushing, Hose Clamps, Mounting Bolts and Screws).

Reduces service time to remove and install HD rear suspension bushings substantially.
Works on Hendrickson Primaax EX, Comfort Air and FCCC V-Ride Pivot and D-Pin suspension bushings.
Tool mounts to suspension for less weight to hold.
Tool includes adapters to align it to bushing axis to reduce likelihood of improper installation.
Includes a high-force 25-ton cylinder for hard-to-remove bushings and also includes the OTC Stinger Series 2510A Air/Hydraulic Pump, with a Hose and Coupler.

This fan spacer extends the fan 3 inches off the water pump flange. It comes with bolts and an adapter bushing for 5/8" and 3/4" water pump shafts. Designed to fit both Chevy and Fords.

【Water Pump Sprocket Holder Tool】The water pump sprocket holder tool can hold the timing chain in place so that the water pump can be removed for maintenance. The full-circle structure of the tool can well hold everything in place, avoid camshaft readjustment, and keep parts from falling into the timing chain cover..
【Material】The water pump sprocket retainer is made of high-quality carbon steel. Its high hardness makes it not easy to break and durable. The black anti-oxidation layer on the tool surface can effectively protect the tool and prolong its service life..
【Simple Operation】The full-circle sprocket holding tool has a special design and is easy to operate. Simply remove the access plate from the front cover, and then line up holes on the water pump tool to the sprocket. It can be easily installed regardless of the orientation of the timing chain..
【Application】The water pump retainer tool saves costly loss of timing on fit for GM 2.2L 2.4L Ecotec motors found in fit for Chevrolet, fit for Oldsmobile, fit for Pontiac, fit for Saab, and fit for Saturn platforms, service range 2002 to current..
【Necessary Tool】The water pump holding tool is a necessary tool for you to replace the water pump. At the same time, it can prevent engi....

[Protect Your Vehicle from Engine Damage] Secure the water pump sprocket with the ABN Water Pump Sprocket Holder to prevent engine vibration and....
[Ensure Easy Maintenance] Remove the access plate then line up holes on the water pump tool to your sprocket.
Use included bolts and cover bolts to....
[Fits Your Vehicle] Water pump sprocket retainer holding tool is compatible with 2.2L Ecotec motors found in GM, Vauxhall, and OPEL vehicles.
[Built to Last] Heavy-duty steel provides maximum strength and durability while the black-oxide finish resists corrosion.
[Package Contents] Each water pump pulley holder tool includes (1) water pump holding tool and (3) 5.5mm water pump bolts with 1.4-inch (3.5cm) length.

This fan spacer extends the fan 2 inches off the water pump flange. It comes with bolts and an adapter bushing for 5/8" and 3/4" water pump shafts. Designed to fit both Chevy and Fords.

The water pump sprocket retainer holding tool is used for holding timing chain in place so water pump can be removed for service. Prevent engine vibration and whining and to keep the timing chain in place to avoid camshaft readjustments.
The water pump sprocket retainer holding tool is compatible with GM, Vauxhall, and OPEL 2.2L 2.4L Ecotec motors, also fit for Chevrolet fit for Oldsmobile fit for Pontiac and Saturn vehicles.
Easy to Use: Simply remove the access plate, line up holes on the water pump tool to your sprocket.
Use included bolts and cover bolts to install the tool.
Made of higher carbon steel, high hardness, not easy to break, The exterior is coated with black antioxidant layer, extended service life. Water pump sprocket tool has a 3.9-inch (9.9cm) diameter and a 1.3-inch (3.3cm) depth.
The water pump pulley holder tool includes 1 pc water pump holding tool, 3pcs 5.5mm water pump bolts with 1.4-inch (3.5cm) length.

Fit: Door Bushing Removal Tool for Wrangler JK JL 4 Door 2008-2019 ..
Material: Made of stainless steel, great performance and repeated use are guaranteed. High quality bushings never rust .The inserts are made of plastic..
Function: These door pin guides help you line up your door pins and put your doors back easily. The door bushing removal tool helps to disassemble your Wrangler corrosive hinges..
Usage: By using the door pin guides align the top cap and lower the door so that the bottom is in place. By using a hammer, to tap the door bushing removal tool until the OE liners are totally disassembled. If you find that it is not suitable for your car，use some type of grease or lube for the new bushings and use a rubber mallet to get them in place. Maybe it works well..
Package include: 1 silver door bushing removal tool, 8 bushings and 2 Pins.Door Bushing Removal Tool did not fit TJ.

DURABLE MATERIA:The Door Bushing Removal Tool was constructed with strong iron.Advanced CNC machined aircraft grade stainless steel structure guides and durable ABS plastic integral molding process bushings, anti-corrosion and never rust..
FITMENT:Fit for Jeep Wrangler JK, JKU, JL, JLU, Sports, Sahara, Freedom, Rubicon, Unlimited 2007-2020. (Door Bushing Removal Tool did not fit TJ).
WIDELY USEFUL:These door pin guides help you line up your door pins and put your doors back easily.The door bushing removal tool helps to remove your Jeep corrosive hinges.By using the door pin guides align the top cap and lower the door so that the bottom is in place. By using a hammer, to tap the door bushing removal tool until the OE liners are totally removed..
QUANTITY INCLUDED:8*Door Pin Guides,8*Door Hinge Liners,1*Door Bushing Removal Tool..
100% SATISFACTION:If you are not satisfied with our kit,please contact us,we will try our best to solve your problem..