Reviews Ecotec Water Pump Tool

ARES 70074 - 2-Piece Fan Clutch Wrench Set - 32mm Fan Clutch Nut Wrench - Water Pump Holder Removal Tool Kit

  • ... and is easy to operate. Simply remove the access plate from the front cover, and then line up holes on the water pump tool to the sprocket. It can be easily installed regardless of the orientation of the timing chain..
  • 【Application】The water pump retainer tool saves costly loss of timing on fit for GM 2.2L 2.4L Ecotec motors found in fit for Chevrolet, fit for Oldsmobile, fit for Pontiac, fit for Saab, and fit for Saturn platforms, service range 2002 to current..
  • 【Necessary Tool】The water pump holding tool is a necessary tool for you to replace the water pump. At the same time, it can prevent engine vibration and whining, effectively save your working time and improve workshop productivity..
Check Stock

Performance Tool W89210 Water Pump Sprocket Holder For GM Ecotec GM 2.2L and 2.4L Chevrolet Oldsmobile Saturn Pontiac Ecotec engines

  • Holds Water Pump Sprocket on 2002 to current GM Ecotec motors so water pump can be serviced..
  • Special design allows easy application regardless of sprocket orientation..
  • Saves costly loss of time by holding the water pump sprocket in place while removing pump..
  • Use on GM 2.2L and 2.4L Chevrolet, Oldsmobile, Saturn, Pontiac Ecotec engines..
Check Stock

COMP Cams 26918-16 Performance Street 1.310\ OD Beehive Spring; 1.800\ Installed Height; 16 Springs

  • Fitment: for GM Ecotec engines in 2.0L, 2.2L, or 2.4L displacements 2000-2010, for GM Ecotec VIN B,D,F,H 2.2L 2000-2009, for GM Ecotec VIN 5,B,P,V 2.4L 2006-2009, for Oldsmobile Alero, for Chevrolet Cavalier, for Pontiac Grand Am, for Saturn L100 L200 L300 LS LS1 LW1 LW200, for Pontiac Sunfire G5 G6, for Chevrolet Cobalt, for Chevrolet HHR, for Chevrolet Malibu, for Lexus Pursuit, for Saturn Sky..
  • Replacement Part Number: 12622329, 12615936. This is vehicle specific product, please make sure your car model and OE number before ordering..
  • Durable Material: Made of stainless steel, durable, solid enough and not easy to deform under pressure..
  • Measure: Intake Tool Head Diameter: 35.1mm / 1.38".
  • Exhaust Tool Head Diameter: 30.1mm / 1.19".
  • Good Performance: Easy installation. It is a good replacement for the old or broken one. Fits for the engine valve well..
Check Stock

OCPTY Intake and Position Actuator Solenoid (VVT) Variable Timing Solenoids Oil Control Replacement Fit for Hyundai Santa FE for 2.4L KIA Optima 2.0L 918022

  • Fitment: for GM Ecotec engines in 2.0L, 2.2L, or 2.4L displacements 2000-2010, for GM Ecotec VIN B,D,F,H 2.2L 2000-2009, for GM Ecotec VIN 5,B,P,V 2.4L 2006-2009, for Oldsmobile Alero, for Chevrolet Cavalier, for Pontiac Grand Am, for Saturn L100 L200 L300 LS LS1 LW1 LW200, for Pontiac Sunfire G5 G6, for Chevrolet Cobalt, for Chevrolet HHR, for Chevrolet Malibu, for Lexus Pursuit, for Saturn Sky..
  • Replacement Part Number: 12622329, 12615936. This is vehicle specific product, please make sure your car model and OE number before ordering..
  • Durable Material: Made of stainless steel, durable, solid enough and not easy to deform under pressure..
  • Measure: Intake Tool Head Diameter: 35.1mm / 1.38".
  • Exhaust Tool Head Diameter: 30.1mm / 1.19".
  • Good Performance: Easy installation. It is a good replacement for the old or broken one. Fits for the engine valve well..
Check Stock

Camshaft Actuator Locking Timing Tool Cam Phaser Retainer Water Pump Sprocket Retainer Holding Tool Compatible with GM Ecotec 2.0 2.4 Engine Replace EN48953

  • Application: Fit GM 2.0 2.4 ECOTEC Engine, OEM Equivalent Part Number: EN 48953.compatible with OPEL :Astra J OPC (2012-).
  • Function: Designed to help out in torquing cam to pulley bolts on the GM Ecotec 2.0 2.4, this kit include camshaft actuator locking tool and water....
  • Not Easy Bent: Our cam phaser retainer tool made of high hardness steel, not soft steel, not alloy, set the camshaft timing, the tabs not easy bent....
  • 12 Months Warranty: We offer 12 months warranty, we will refund or replace, if the camshaft actuator locking timing tool have any quality problem.
Check Stock

Lisle 13800 Water Pump Sprocket Holder For GM Ecotec

  • Holds the timing chain and gear in place.
Check Stock

CTA Tools 2757 Exotic Water Pump Sprocket Holder - Compatible with GM

  • Holds the Timing Chain and Gear in Place.
  • Prevents Loss of Timing or Engine Damage.
  • Features Anodized Aluminum Body with a Set of 2 Bolts.
Check Stock

NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. The holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money..
  • FITS YOUR VEHICLE★-The NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to,the following applications: fan clutch wrench tool is kit compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and compatible with Ford.Also compatible with some Ford, GM, and Chevy models..
  • BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us..
  • EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clock....
Check Stock

POPULO Hybrid Water Transfer Pump, 120VAC/20VDC 4.0Ah 325GPH 45Ft Portable Electric Utility Pump, Electric Cordless Water Pump for Home, Pool, RV with 3/4" Garden Hose Thread and Suction Filter

  • 【AC/DC HYBRID PUMP】Populo water transfer pump is a self-priming pump, can run off a Populo 20V Lithium battery pack or 120VAC electric power, ideal for water plumbing tasks, dumping kids swimming pool into the same spot, using it to run a sprinkler, transferring water from the tank into your camper/rv, clearing and emptying water out of tanks etc. Pumps over 150 gallons on a single charge of a 4.0Ah battery included..
  • 【SIMPLE & PRACTICAL】Our portable power water pump is easy to use, just connect the water hoses and press the on/off switch to work directly. The water suction pump has a suction lift up to 6 ft, Max flow 325 GPH, and 45 ft Max head lift, which can meet most of the daily uses. The water intake and discharging ports of utility pump adopt any of ¾” garden hose thread (discharging hose not included)..
  • 【STABLE & EASY CARRY】Populo hybrid water transfer pump kit comes with a large base increased the stability when plumbing. Built with a splash-resistant battery cover, an easy-carry handle on the top of this pump for convenient movement, all accessories can keep in a tool bag included for easy carry. The complimentary suction filter can ....
Check Stock

POPULO Hybrid Water Transfer Pump, 120VAC or 20VDC Portable Electric Utility Pump, 4.0AH 325GPH 45FT Electric Cordless Water Pump for Home, Pool, RV, Garden, Hot Tub, Tank, Ponds, Aquariums

  • 【VERSATILITY】POPULO Hybrid Transfer Pump is ideal for displacing water from unwanted areas to another location, such as changing the water in an aquarium, pool, hot tub, or fountain.
  • Moving water from a rain barrel or pond to a garden hose, sprinkler, or drip system for watering your plants or lawn.
  • Fill water storage tanks, barrels, or RV for emergency or backup purposes.
  • Remove water from a flooded basement, garage, or yard after heavy rain or snow melt..
  • 【AC/DC HYBRID WATER PUMP】POPULO water transfer pump is a self-priming pump, that can run off a Populo 20V Lithium battery pack or 120VAC electric power, The water suction pump has a suction lift up to 6 ft, Max flow 325 GPH, and 45 ft Max head lift, which can meet most of the daily uses. Multiple powering options, you can plug the pump into a wall outlet or portable power station, or run directly on battery power. Pumps over 150 gallons on a single charge of a 4.0Ah battery included..
  • 【PORTABLE & PRACTICAL】POPULO hybrid water transfer pump is built with a splash-resistant battery cover and an easy-carry handle for convenient movement and protection. All accessories can keep in a tool bag included ....
Check Stock