Reviews Water Pump Arduino Connection

UMLIFE 4pcs Capacitive Soil Moisture Sensor 4Channel 5V Relay Module and 4pcs Water Pump + 4M Vinyl Tubing for Arduino Moisture Detection Garden Watering DIY

  • ✹✹Capacitive Sensor: Operating voltage: 3.3 ~ 5.5 VDC.
  • ✹✹ UMLIFE automated watering DIY Kit is extremely popular since it automatically waters your plants and flowers according to monitor the soil moisture in a very efficient way..
  • ✹✹Mini Water Pump: 4pcs , Rated voltage: DC3V or 4.5V.
  • No load of water discharge capacity: 100L / H.
  • Load rated current: 0.18A, Use: diving type.
  • ✹✹UMLIFE Combines water pump, tubing, soil moisture sensor, 4 channel 5V relay module in one plant watering system, it is convenient for Arduino DIY drip irrigating system..
Check Stock

TMEZON 12 Volt 2A Power Adapter Supply AC to DC 2.1mm X 5.5mm Plug 12v 2 Amp Power Supply, Wall Plug Extra Long 8 Foot Cord

  • 【Overview】 AC Input: 100V to 240V / DC Output: 12 volt at 2 amp 24Watt rating / 8Ft (2.4m) Power Cable / Self-Adapting Barrel Plug for 2.1mm * 5.5mm Center Positive / Include a Screw Terminal DC Power Connector for wire direct connection.
  • 【Safety protection】12v 2a Power Supply Wall Plug Extra Long 8 Foot Cord , Manufactured with high quality material and built-in protection of over current, over voltage, short circuits. COMPACT DESIGN and LOW CONSUMPTION makes it ideal for taking around and using at home..
  • 【Application】 (Should be 12 V & not exceed 24 W) : LED Strip Light Driver / 5050 RGB / Fresh Water Bilge Air Pump / USB Hub / Battery Charger / DVR NVR Surveillance System / Security CCTV Camera / External Hard Drive / Cable Modem / Router / Electronic Piano Keyboard / IR Illuminator / Portable Radio / Computer PC Case Fan / Motor / Arduino PCB Design / Computer Speakers / Digital Photo Frame / Foot Back Neck Shoulder Massager / And Other 12 Vdc Devices.
  • 【Kindly Reminder】 (1) Avoid water, indoor use only. (2) You can aslo cut off the dc plug and connect the wire directly for some special usages (Dotted line is negative). (3) Contact us for wholesale price for bulk order (4) Search "TMEZON 12V power supply" for our other ac adapters..
Check Stock

Hosyond 5Pcs D1 Mini NodeMcu ESP8266 ESP-12F Wireless WiFi Module Internet of Things Development Board Compatible with Arduino/WeMos

  • It is a mini NodeMcu Lua Wireless development board based on ESP-8266..
  • Compatible with Arduino IDE and WeMos D1 Mini..
  • 4M bytes, 5V 1A switching power supply onboard,1MB flash memory.
  • 11 digital input/output pins, all pins with interrupt/PWM/I2C/1-wire support (except D0).
  • 1 analog input (3.2V max input). Micro USB connection..
  • D1 mini development board compatible with Arduino WeMos and can be programmed in the compatible for Arduino IDE..
Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board Bundled with R3 Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory.R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. Can be used as server or client. Directly plug puzzle board, no soldering required. It is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be ....
Check Stock

ACEIRMC 6pcs ESP8266 D1 Mini WiFi Dev Board ESP-12 ESP-12F NodeMcu Mini Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino

  • This is D1 mini , it is a mini NodeMcu Lua WiFi board based on ESP-8266EX..
  • D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini.
  • 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB connection.
  • WIFI development board,4M bytes.5V 1A switching power supply (switching power supply）onboard..
  • Our mini development board compatible with Arduino WeMos and can be programmed in the for Arduino IDE..
Check Stock

2771-20 M18 For Milwaukee Tool Water Transfer Pump (Bare Tool)

  • Features:Cordless Transfer Pump, Battery Platform M18, Maximum Flow Rate 8.
  • Voltage: 18V Length & Width x Height: 13.2" x 5.75" x 6" Head Height: Up to 75ft Outlet/Inlet Connections: 3/4" Lift up to 18' Weight: 7.9 lbs.
  • Faster Water Transfers, Faster Service Calls. The M18 Transfer Pump brings new to world cordless innovation to the industry with the fastest setup in the marketplace. With a self-priming pump, you can connect and go quicker than ever. The tool’s flexible impeller and powerful pump moves water at up to 480 gallons per hour, generates up to 18’ of lift and produces up to 75’ of head height..
  • Inlet connection: 3/4 in. brass Outlet connection: 3/4 in. brass Head height: up to 75 ft..
Check Stock

Jebao PP333L Water Pump with 10W Light (53 GPH)

  • These are the only way we carry the similar PP333L replacement pump.The pumps with a light are hard wired in and their cord does not disconnect from the pump. Cord length from pump to light 5 ½".
  • This is a small table top fountain pump. the PUMP SIZE length 2" , width 1 ⅝ " and height is 1 ⅙ ".
  • Cord length from pump to transformer connection is about 6'. Cord length from transformer to connection is about 15".
  • Many fountain manufactures will go to Jebao and have them make pumps with specific cord lengths and lights to fit their fountains. They will still be the same model number pump but they might have an additional cord or two. These are not produced for sale to the public. Just a short production run..
Check Stock

KEYESTUDIO Starter Kit V2 for Arduino with RJ11 Connector, Great STEM Education Kit for Students, Teachers and Hardware Enthusiast

  • Whenever you and your family go for vacations, you may used to get worried about your plants because they need water on regular basis. We develop this Automatic Plant Watering System to solve this problem as plants need water according to the moisture level of soil..
  • The kit includes a plus controller, DHT22 temperature and humidity sensor, I2C LCD, push button modules, power amplifier module, DS3231 clock module, non-contact level liquid sensor, motor driver module, capacitive soil humidity sensor, and pump..
  • More than 13 well-selected electronic modules and 17 step by step creative tutorials. Full example code is provided and explained and even includes useful software tool..
  • Multi-purpose: timing watering mode, and the sensor detection mode that when the soil is dry, Arduino will command the water pump to run(up to 4 plants at once)..
  • Our system measures the soil moisture and waters automatically according to it. A audio power amplifier module tells us when the bucket is empty. I2C LCD displays the temperature and humidity..
Check Stock

BURCAM 300514WHZ 1/3 HP Automatic Laundry Tub Pump, Black

  • 1/3 HP AUTOMATIC LAUNDRY TUB PUMP: Designed for a maximum lift of 10' (3. 0m) to handle normal waste water from domestic washing machines, bar sinks and all waste water not containing solids. Mounts directly to tail piece. Fits under wet bars, kitchenettes, vanities and utility sinks (complete self-contained unit)..
  • LAUNDRY TUB PUMP: Automatic switch starts motor when water enters into the pump body. Allows sink installation without breaking concrete..
  • WATER PROOF DESIGN: 1/3 HP 115 V AC 60Hz Waterproof shroud protective cover to protect the pump from water damages..
  • PUMP CAPACITY: Capacity up to 1, 400 GPH. Maximum water temperature 60 degrees C (140 degrees F)..
  • EASY TO INSTALL: No trap or inlet piping required. No vent connection required..
Check Stock

ZuwaUSA Drill Powered Pump ¾” 8 GPM - Marine Grade Aluminum | Unistar-2001A (Drill not included)

  • CONNECTION: 3/4” NPT | Dry self-priming to 13 Ft. | Max temperature 200°F | Working pressure of 58 PSI | The 3/8” shank fits all common chucks for most drills.
  • FLUID VISCOSITY: 1 (water) to 20,000 cP (heavy gear oil) | Transports a wide range of liquids, including liquids containing solids, oils, and corrosives.
  • DRILL POWERED: ZUWAUSA heavy-duty drill powered pump is designed to work with rechargeable/electrical drills with a maximum speed of 3,000 RPM.
  • FLUID TRANSFERS: water, seawater, wastewater, diesel fuel, biodiesel, vegetable oils, gear, motor and heating oil, detergents, antifreeze, chemicals, cooling lubricants..
  • EXAMPLE APPLICATIONS: diesel / home heating oil, remote sludge transfer, gear box oil changes, domestic water supply, flooded basements, barrel emptying/filling, draining waste oil, sewerage disposal, fueling vehicles, car wash, draining aquariums, disposal of cooling lubricants, bilge pump, booster pump..
  • OTHER TERMS FOR THIS PRODUCT: Coolant purge pump, Water purge pump, Oil purge pump, Fluid purge pump, Drill pump, portable water pump, portable oil pump, portable coolant pump, Heating oil transfer pump.
Check Stock